Thermal performance of a shell-and-tube latent heat thermal energy storage unit : Role of annular fins

This study conducts numerical investigations on melting process in a shell-and-tube latent heat thermal energy storage (LHTES) unit with annular fins. Commercial grade paraffin is employed as the phase change material (PCM) and water serves as the heat transfer fluid (HTF). Finite-volume-method (FVM) based numerical simulations are performed to investigate the effects of fin number, height and thickness on the phase change process. Particular attention is made to justify the contribution of local natural convection to the overall phase change process. Results demonstrate that the full melting time could be maximally reduced by 65% by inserting annular fins into PCM. For maximizing thermal performance, an optimal group fin parameter (fin number N=31, thickness t/l=0.0248 and interval l/L=0.0313) is recommended for the present study.

[1]  R. Pitchumani,et al.  Computational studies on a latent thermal energy storage system with integral heat pipes for concentrating solar power , 2013 .

[2]  S. D. Kim,et al.  Heat-transfer characteristics of a latent heat storage system using MgCl2 · 6H2O , 1992 .

[3]  Jun Zhao,et al.  Numerical study of the improvement of an indirect contact mobilized thermal energy storage container , 2016 .

[4]  Davood Domiri Ganji,et al.  Multi-objective RSM optimization of fin assisted latent heat thermal energy storage system based on solidification process of phase change Material in presence of copper nanoparticles , 2017 .

[5]  K. Ismail,et al.  Fins and turbulence promoters for heat transfer enhancement in latent heat storage systems , 2011 .

[6]  Hailong Li,et al.  Experimental study on the direct/indirect contact energy storage container in mobilized thermal energy system (M-TES) , 2014 .

[7]  Jinyue Yan,et al.  A combined experimental and simulation study on charging process of Erythritol–HTO direct-blending based energy storage system , 2014 .

[8]  Jinyue Yan,et al.  Numerical simulation study on discharging process of the direct-contact phase change energy storage system , 2015 .

[9]  R. Velraj,et al.  Thermal analysis of a finned-tube LHTS module for a solar dynamic power system , 2002 .

[10]  V. Badescu.  Optimal profile of heat transfer pin fins under technological constraints , 2015 .

[11]  Ching-Chih Chang.  A multivariate causality test of carbon dioxide emissions, energy consumption and economic growth in China , 2010 .

[12]  Zhongliang Liu,et al.  Experimental investigations on the characteristics of melting processes of stearic acid in an annulus and its thermal conductivity enhancement by fins , 2005 .

[13]  Ya-Ling He,et al.  Effects of natural convection on latent heat storage performance of salt in a horizontal concentric tube , 2015 .

[14]  A. Akbarzadeh,et al.  A numerical and experimental study of solidification around axially finned heat pipes for high temperature latent heat thermal energy storage units , 2014 .

[15]  Elisa Guelpa,et al.  Entropy generation analysis for the design improvement of a latent heat storage system , 2013 .

[16]  M. Lacroix.  Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tube , 1993 .

[17]  Siaw Kiang Chou,et al.  Achieving better energy-efficient air conditioning - A review of technologies and strategies , 2013 .

[18]  Jun Zhao,et al.  Techno-economic assessment of mobilized thermal energy storage for distributed users: A case study in China , 2017 .

[19]  Adriano Sciacovelli,et al.  Maximization of performance of a PCM latent heat storage system with innovative fins , 2015 .

[20]  S. Sharma.  Determinants of carbon dioxide emissions: Empirical evidence from 69 countries , 2011 .

[21]  Zahra Hajabdollahi,et al.  Multi-objective optimization of pin fin to determine the optimal fin geometry using genetic algorithm , 2012 .

[22]  Mervyn Smyth,et al.  A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins , 2009 .

[23]  Philippe Marty,et al.  Experimental and numerical study of annular PCM storage in the presence of natural convection , 2013 .

[24]  C. Tang,et al.  The dynamic links between CO2 emissions, economic growth and coal consumption in China and India , 2013 .

[25]  Erik Dahlquist,et al.  Economic assessment of the mobilized thermal energy storage (M-TES) system for distributed heat supply , 2013 .

[26]  Ibrahim Dincer,et al.  Heat transfer analysis of phase change process in a finned-tube thermal energy storage system using artificial neural network , 2007 .

[27]  Elisa Guelpa,et al.  Second Law Optimization of a PCM Based Latent Heat Thermal Energy Storage System with Tree Shaped Fins , 2014 .

[28]  Aytunç Erek,et al.  Experimental and numerical investigation of thermal energy storage with a finned tube , 2005 .

[29]  L. Cabeza,et al.  Experimental evaluation of commercial heat exchangers for use as PCM thermal storage systems , 2009 .

[30]  Martin Belusko,et al.  Comparison of pinned and finned tubes in a phase change thermal energy storage system using CFD , 2013 .

[31]  D. Ganji,et al.  Performance enhancement of finned heat pipe assisted latent heat thermal energy storage system in the presence of nano-enhanced H2O as phase change material , 2017 .

[32]  Mounir Baccar,et al.  Numerical study of PCM solidification in a finned tube thermal storage including natural convection , 2015 .

[33]  Ruzhu Wang,et al.  Experimental investigation and performance analysis of a fin tube phase change cold storage unit for high temperature cooling application , 2015 .

[34]  Xiaohu Yang,et al.  The role of porous metal foam on the unidirectional solidification of saturating fluid for cold storage , 2017 .