Molecularly Imprinted Polymer Nanoparticles for Formaldehyde Sensing with QCM

Herein, we report on molecularly imprinted polymers (MIPs) for detecting formaldehyde vapors in air streams. A copolymer thin film consisting of styrene, methacrylic acid, and ethylene glycol dimethacrylate on quartz crystal microbalance (QCM) yielded a detection limit of 500 ppb formaldehyde in dry air. Surprisingly, these MIPs showed specific behavior when tested against a range of volatile organic compounds (VOCs), such as acetaldehyde, methanol, formic acid, and dichloromethane. Despite thus being a suitable receptor in principle, the MIPs were not useful for measurements at 50% humidity due to surface saturation by water. This was overcome by introducing primary amino groups into the polymer via allyl amine and by changing the coating morphology from thin film to nanoparticles. This led to the same limit of detection (500 ppb) and selectivity as before, but at the real-life conditions of 50% relative humidity.

[1]  Peter A. Lieberzeit,et al.  Molecularly imprinted polymers for conductance sensing of Cu2+ in aqueous solutions , 2014 .

[2]  Peter A Lieberzeit,et al.  Low-Density Lipoprotein Sensor Based on Molecularly Imprinted Polymer. , 2016, Analytical chemistry.

[3]  Qin Zhu,et al.  High sensitive and selective formaldehyde gas sensor using molecular imprinting technique based on Ag-LaFeO 3 , 2014 .

[4]  Chia-Yen Lee,et al.  Formaldehyde Gas Sensors: A Review , 2013, Sensors.

[5]  Charles H. Hobbs,et al.  Formaldehyde release from selected consumer products: influence of chamber loading, multiple products, relative humidity, and temperature , 1984 .

[6]  Qin Zhu,et al.  A highly sensitive and selective formaldehyde gas sensor using a molecular imprinting technique based on Ag–LaFeO3 , 2014 .

[7]  J. BelBruno,et al.  A Molecularly Imprinted Fluoral-P/Polyaniline Double Layer Sensor System for Selective Sensing of Formaldehyde , 2014, IEEE Sensors Journal.

[8]  Tunga Salthammer,et al.  Impact of building materials on indoor formaldehyde levels: Effect of ceiling tiles, mineral fiber insulation and gypsum board , 2013 .

[9]  Sergey A Piletsky,et al.  Advances in the manufacture of MIP nanoparticles. , 2010, Trends in biotechnology.

[10]  Jing Wang,et al.  An enrichment method to detect low concentration formaldehyde , 2008 .

[11]  Tunga Salthammer,et al.  Formaldehyde in the ambient atmosphere: from an indoor pollutant to an outdoor pollutant? , 2013, Angewandte Chemie.

[12]  Adnan Mujahid,et al.  Layer-by-layer assembly of low-temperature-imprinted poly(methacrylic acid)/gold nanoparticle hybrids for gaseous formaldehyde mass sensing , 2014 .

[13]  André Margaillan,et al.  Recent advances on ion-imprinted polymers , 2013 .

[14]  D. Natalia,et al.  Molecularly imprinted polymers. , 2012, Ceska a Slovenska farmacie : casopis Ceske farmaceuticke spolecnosti a Slovenske farmaceuticke spolecnosti.

[15]  Peter A Lieberzeit,et al.  QCM gas phase detection with ceramic materials—VOCs and oil vapors , 2011, Analytical and bioanalytical chemistry.

[16]  Liang Feng,et al.  The fabrication and characterization of a formaldehyde odor sensor using molecularly imprinted polymers. , 2005, Journal of colloid and interface science.

[17]  Martin D. B. Charlton,et al.  Detection of low concentration formaldehyde gas by photonic crystal sensor fabricated by nanoimprint process in polymer material , 2014, Photonics Europe.

[18]  Thu-Hoa Tran-Thi,et al.  Real-time detection of formaldehyde by a sensor , 2012 .

[19]  Jing Wang,et al.  Silicon-based micro-gas sensors for detecting formaldehyde , 2009 .

[20]  Brian J. Smith,et al.  High-Level ab Initio Molecular Orbital Calculations of Imine Formation , 1998 .

[21]  Peter A. Lieberzeit,et al.  Acidic and basic polymers for molecularly imprinted folic acid sensors—QCM studies with thin films and nanoparticles , 2013 .

[22]  Peter A. Lieberzeit,et al.  Molecularly imprinted polymer nanoparticles in chemical sensing – Synthesis, characterisation and application , 2015 .

[23]  Peter A Lieberzeit,et al.  Comparing biomimetic and biological receptors for insulin sensing. , 2010, Chemical communications.

[24]  Kiattawee Choowongkomon,et al.  Surface molecular imprints of WGA lectin as artificial receptors for mass-sensitive binding studies , 2011, Analytical and bioanalytical chemistry.

[25]  Sergey A. Piletsky,et al.  MIP-based Sensors , 2012 .

[26]  Y. Fung,et al.  Simultaneous determination of gaseous and particulate carbonyls in air by coupling micellar electrokinetic capillary chromatography with molecular imprinting solid-phase extraction. , 2014, Journal of chromatography. A.

[27]  Peter A. Lieberzeit,et al.  Molecularly imprinted polymer–Ag2S nanoparticle composites for sensing volatile organics , 2014 .

[28]  Peter A. Lieberzeit,et al.  Polymerization Parameters Influencing the QCM Response Characteristics of BSA MIP , 2014, Biosensors.

[29]  C. Hobbs,et al.  Formaldehyde release rate coefficients from selected consumer products. , 1983, Environmental science & technology.

[30]  Peter A. Lieberzeit,et al.  Artificial Antibodies for Bioanalyte Detection—Sensing Viruses and Proteins , 2006 .

[31]  G. Mustafa,et al.  MIP sensors on the way to biotech applications: Targeting selectivity , 2013 .