Near-interface cracking in a TiN coated high speed steel due to combined shear and compression under cyclic impact loading

[1]  A. Volinsky,et al.  Brittle coating effects on fatigue cracks behavior in Ti alloys , 2019, International Journal of Fatigue.

[2]  R. O. Cunha Lima,et al.  Comparative study of surface modification techniques through average flank wear in high speed steel tools coated with thin TiN film , 2019, Surface and Coatings Technology.

[3]  M. Burghammer,et al.  Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction , 2019, Materials & Design.

[4]  T. Antretter,et al.  Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically , 2019, Surface and Coatings Technology.

[5]  Rafael A. Mesquita,et al.  Tool Steels : Properties and Performance , 2016 .

[6]  H. Usuki,et al.  Comparison of TiN-coated tools using CVD and PVD processes during continuous cutting of Ni-based superalloys , 2015 .

[7]  K. Bouzakis,et al.  Effect of the interface fatigue strength of NCD coated hardmetal inserts on their cutting performance in milling , 2015 .

[8]  I. Etsion,et al.  Effects of elastic modulus mismatch between coating and substrate on the friction and wear properties of TiN and TiAlN coating systems , 2015 .

[9]  K. Bouzakis,et al.  Fatigue and adhesion characterization of DLC coatings on steel substrates by perpendicular and inclined impact tests , 2015 .

[10]  Hui Cheng,et al.  A novel prediction model for thrust force and torque in drilling interface region of CFRP/Ti stacks , 2015 .

[11]  C. Mitterer,et al.  The effect of droplets in arc evaporated TiAlTaN hard coatings on the wear behavior , 2014 .

[12]  K. Bouzakis,et al.  Brittleness and fatigue effect of mono- and multi-layer PVD films on the cutting performance of coated cemented carbide inserts , 2014 .

[13]  K. Bouzakis,et al.  Fatigue strength of diamond coatings' interface assessed by inclined impact test , 2013 .

[14]  Paul Xirouchakis,et al.  Mechanical load distribution along the main cutting edges in drilling , 2013 .

[15]  G. Kermouche,et al.  Damage phenomena of thin hard coatings submitted to repeated impacts: Influence of the substrate and film properties , 2013 .

[16]  A. Mateo,et al.  Influence of substrate microstructure on the contact fatigue strength of coated cold-work tool steels , 2012 .

[17]  L. Llanes,et al.  Microstructural effects on the fatigue crack nucleation in cold work tool steels , 2010 .

[18]  R. Ebner,et al.  High-strength Steel under Monotonic and Cyclic Loading – A Study on the Damage Evolution near the Edge of a Stamping Tool , 2009 .

[19]  K. Holmberg,et al.  Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering , 2009 .

[20]  B. Yalçın,et al.  Investigation of the wear performance and thermal diffusivity properties of M41 tools steel coated with various film coatings , 2009 .

[21]  J. Prado,et al.  Fracture toughness of carbides in tool steels evaluated by nanoindentation , 2007 .

[22]  Konstantinos-Dionysios Bouzakis,et al.  The inclined impact test: A novel method for the quantification of the adhesion properties of PVD films , 2007 .

[23]  K. Kim,et al.  A comparative study on cutting performance of TiN-coated tungsten carbide cutting tool with a cobalt interlayer , 2005 .

[24]  Konstantinos-Dionysios Bouzakis,et al.  The inclined impact test, an efficient method to characterize coatings' cohesion and adhesion properties , 2004 .

[25]  S. Schmauder,et al.  Micromechanisms and modelling of crack initiation and growth in tool steels: role of primary carbides , 2003, International Journal of Materials Research.

[26]  A. Matthews,et al.  Handbook of Hard Coatings: Edited by Rointan E Bunshah; Noyes Publications/William Andrew Publishing, New York 2001 (Available from American Technical Publishers Ltd, 27-29 Knowl Piece, Wilbury Way, Hitchin, Herts, SG4 0SX, England, Price £94) , 2001 .

[27]  Sture Hogmark,et al.  Design and evaluation of tribological coatings , 2000 .

[28]  S. Sharif,et al.  Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy , 2000 .

[29]  F. Rammerstorfer,et al.  Hierarchical models for simulating the mechanical behavior of heterogeneous materials: an approach to high speed tool steel 1 This paper is dedicated to Professor H.F. Fischmeister on the occasion of his recent retirement. 1 , 1999 .

[30]  H. Berns.  Hartlegierungen und Hartverbundwerkstoffe , 1998 .

[31]  D. B. Lewis,et al.  Droplet formation on steel substrates during cathodic steered arc metal ion etching , 1997 .

[32]  A. Wronski,et al.  Monotonic subcritical crack growth in T42 high speed steel , 1997 .

[33]  C. Broeckmann,et al.  Microstructural aspects of failure in particle reinforced metal matrix composites , 1996 .

[34]  T. Cselle,et al.  Today's applications and future developments of coatings for drills and rotating cutting tools , 1995 .

[35]  Emmanuel O. Ezugwu,et al.  Failure modes and wear mechanisms of M35 high-speed steel drills when machining inconel 901 , 1995 .

[36]  H. Christ,et al.  Wechselverformung von Metallen , 1991 .

[37]  A. Wronski,et al.  Optimisation of Processing Parameters for Direct Vacuum Sintering of a T15 High Speed Steel , 1991 .

[38]  Sture Hogmark,et al.  How TiN coatings improve the performance of high speed steel cutting tools , 1990 .

[39]  M. Laugier.  New formula for indentation toughness in ceramics , 1987 .

[40]  D. Hasselman,et al.  Evaluation ofKIc of brittle solids by the indentation method with low crack-to-indent ratios , 1982 .