Reverse blocking characteristics and mechanisms in Schottky-drain AlGaN/GaN HEMT with a drain field plate and floating field plates*

In this paper, a novel AlGaN/GaN HEMT with a Schottky drain and a compound field plate (SD-CFP HEMT) is presented for the purpose of better reverse blocking capability. The compound field plate (CFP) consists of a drain field plate (DFP) and several floating field plates (FFPs). The physical mechanisms of the CFP to improve the reverse breakdown voltage and to modulate the distributions of channel electric field and potential are investigated by two-dimensional numerical simulations with Silvaco-ATLAS. Compared with the HEMT with a Schottky drain (SD HEMT) and the HEMT with a Schottky drain and a DFP (SD-FP HEMT), the superiorities of SD-CFP HEMT lie in the continuous improvement of the reverse breakdown voltage by increasing the number of FFPs and in the same fabrication procedure as the SD-FP HEMT. Two useful optimization laws for the SD-CFP HEMTs are found and extracted from simulation results. The relationship between the number of the FFPs and the reverse breakdown voltage as well as the FP efficiency in SD-CFP HEMTs are discussed. The results in this paper demonstrate a great potential of CFP for enhancing the reverse blocking ability in AlGaN/GaN HEMT and may be of great value and significance in the design and actual manufacture of SD-CFP HEMTs.

[1]  E. D. Wolley,et al.  High-voltage planar p-n junctions , 1967 .

[2]  K. Kunihiro,et al.  Experimental evaluation of impact ionization coefficients in GaN , 1999, IEEE Electron Device Letters.

[3]  Shreepad Karmalkar,et al.  Enhancement of breakdown voltage in AlGaN/GaN high electron mobility transistors using a field plate , 2001 .

[4]  S. Karmalkar,et al.  RESURF AlGaN/GaN HEMT for high voltage power switching , 2001, IEEE Electron Device Letters.

[5]  B. K. Ridley,et al.  Growth and passivation of AlGaN/GaN heterostructures , 2003 .

[6]  A. Chini,et al.  High breakdown voltage AlGaN-GaN HEMTs achieved by multiple field plates , 2004, IEEE Electron Device Letters.

[7]  S. Keller,et al.  High Breakdown Voltage Achieved on AlGaN/GaN HEMTs With Integrated Slant Field Plates , 2006, IEEE Electron Device Letters.

[8]  A. Wakejima,et al.  230W C-band GaN-FET power amplifier , 2007 .

[9]  I. Omura,et al.  A 120-W Boost Converter Operation Using a High-Voltage GaN-HEMT , 2008, IEEE Electron Device Letters.

[10]  J. Wurfl,et al.  AlGaN/GaN HEMT With Integrated Recessed Schottky-Drain Protection Diode , 2009, IEEE Electron Device Letters.

[11]  Kevin J. Chen,et al.  Schottky-Ohmic Drain AlGaN/GaN Normally Off HEMT With Reverse Drain Blocking Capability , 2010, IEEE Electron Device Letters.

[12]  L. Hongxia,et al.  Development and characteristic analysis of a field-plated Al2O3/AlInN/GaN MOS—HEMT , 2011 .

[13]  R. Ishikawa,et al.  5.65 GHz High-Efficiency GaN HEMT Power Amplifier With Harmonics Treatment up to Fourth Order , 2012, IEEE Microwave and Wireless Components Letters.

[14]  Yu-Syuan Lin,et al.  AlGaN/GaN HEMTs on Silicon With Hybrid Schottky–Ohmic Drain for High Breakdown Voltage and Low Leakage Current , 2012, IEEE Electron Device Letters.

[15]  Yuan Wang,et al.  Reverse blocking enhancement of drain field plate in Schottky-drain AlGaN/GaN high-electron mobility transistors , 2014 .

[16]  Radoslava Mitova,et al.  Investigations of 600-V GaN HEMT and GaN Diode for Power Converter Applications , 2014, IEEE Transactions on Power Electronics.

[17]  Yi Wang,et al.  Mechanism of improving forward and reverse blocking voltages in AlGaN/GaN HEMTs by using Schottky drain , 2014 .

[18]  Daisuke Ueda,et al.  A 3-Phase AC–AC Matrix Converter GaN Chipset With Drive-by-Microwave Technology , 2015, IEEE Journal of the Electron Devices Society.