Refrigerant injection for heat pumping/air conditioning systems: Literature review and challenges discussions

This paper reviews the major research on refrigerant injection techniques in detail. Liquid and vapor refrigerant injection techniques are discussed and compared. The current research on refrigerant injection techniques falls into two categories: system level research and component level research. The system level research is focused on low ambient temperature heating, heat pump water heating, high ambient temperature cooling, cycle comparison, and control strategy development. Internal heat exchanger and flash tank cycles are the two typical cycles for refrigerant injection. These two cycles are discussed and compared in detail. The component level research is focused on employing different types of compressors, variable speed compressors, the injection process, and the flash tank. Different types of compressors employing refrigerant injection are presented. Based on the literature study, the potential future research directions are presented and discussed. The flash tank cycle control strategy and refrigerant charge management strategy are worth further research efforts. Compressor design can be improved in order to optimize the performance with refrigerant injection. The appropriate design of flash tanks plays a vital role in achieving appropriate two-phase flow patterns in the flash tank. Computational Fluid Dynamics (CFD) modeling can be a useful tool to facilitate the design of the flash tank.

[1]  Reinhard Radermacher,et al.  Two-stage heat pump system with vapor-injected scroll compressor using R410A as a refrigerant , 2009 .

[2]  Changqing Tian,et al.  State of the Art of Air-source Heat Pump for Cold Regions , 2006 .

[3]  Jean Lebrun,et al.  Scroll compressors using gas and liquid injection: experimental analysis and modelling , 2002 .

[4]  Hoon Kang,et al.  Effects of liquid refrigerant injection on the performance of a refrigeration system with an accumulator heat exchanger , 2008 .

[5]  Wenxing Shi,et al.  Optimization of refrigeration system with gas-injected scroll compressor , 2009 .

[6]  Changqing Tian,et al.  DEVELOPMENT AND EXPERIMENTAL INVESTIGATION ON TWO-STAGE COMPRESSION VARIABLE FREQUENCY AIR SOURCE HEAT PUMP , 2006 .

[7]  Yingjiang Ma,et al.  An Experimental Study on the Heat Pump Water Heater System with Refrigerant Injection , 2008 .

[8]  Honghyun Cho,et al.  Thermodynamic analysis on the performance of a variable speed scroll compressor with refrigerant injection , 2002 .

[9]  S. Sami,et al.  Study of liquid injection impact on the performance of new refrigerant mixtures , 2003 .

[10]  Hung M. Pham,et al.  Vapor-injected scroll compressors , 2003 .

[11]  Wang Kai,et al.  Investigation of the heat pump water heater using economizer vapor injection system and mixture of R22/R600a , 2009 .

[12]  Guo-yuan Ma,et al.  Characteristics of an improved heat-pump cycle for cold regions , 2004 .

[13]  Marco Corradi,et al.  Two-stage transcritical carbon dioxide cycle optimisation: A theoretical and experimental analysis , 2005 .

[14]  Baolong Wang,et al.  Design of experimental bench and internal pressure measurement of scroll compressor with refrigerant injection , 2007 .

[15]  Xianting Li,et al.  Numerical research on the scroll compressor with refrigeration injection , 2008 .

[16]  Xianting Li,et al.  Numerical analysis on the effects of refrigerant injection on the scroll compressor , 2006 .

[17]  Ma Guoyuan,et al.  Experimental investigation of air-source heat pump for cold regions , 2003 .

[18]  K. Umezu,et al.  Heat pump room air-conditioner using variable capacity compressor , 1984 .

[19]  Xudong Wang.  PERFORMANCE INVESTIGATION OF TWO-STAGE HEAT PUMP SYSTEM WITH VAPOR-INJECTED SCROLL COMPRESSOR , 2008 .

[20]  Weihua Guo,et al.  Northern China Heat Pump Application with the Digital Heating Scroll Compressor , 2006 .

[21]  Werner Soedel,et al.  An Investigation of Compressor Slugging Problems , 1994 .

[22]  S. Sami,et al.  Behaviour of refrigerant mixtures with gas/liquid injection , 2003 .

[23]  Guoyuan Ma,et al.  Experimental study of a heat pump system with flash-tank coupled with scroll compressor , 2008 .

[24]  Reinhard Radermacher,et al.  Scroll Compressor Simulation Model , 2001 .

[25]  Xing Ziwen,et al.  Study on performance of a heat pump water heater using suction stream liquid injection , 2009 .

[26]  Mitsuhiro Fukuta,et al.  An investigation of the performance of a scroll compressor under liquid refrigerant injection , 2001 .

[27]  Honghyun Cho,et al.  Performance evaluation of a two-stage CO2 cycle with gas injection in the cooling mode operation , 2009 .

[29]  S. M. Sami,et al.  A new design for an air-source heat pump using a ternary mixture for cold climates , 1995 .

[30]  James E. Braun,et al.  Mathematical modeling of scroll compressors — part II: overall scroll compressor modeling , 2002 .

[31]  Honghyun Cho,et al.  Influence of liquid refrigerant injection on the performance of an inverter-driven scroll compressor , 2003 .

[32]  E. Groll,et al.  Two-stage air-source heat pump for residential heating and cooling applications in northern U.S. climates , 2008 .

[33]  Reinhard Radermacher,et al.  PERFORMANCE OF CO2 CYCLES WITH A TWO-STAGE COMPRESSOR , 2004 .

[34]  Werner Soedel,et al.  A Mathematical Model for Simulating Liquid and Vapor Two-Phase Compression Processes and Investigating Slugging Problems in Compressors , 1995 .

[35]  W. Neal,et al.  Implications of cooling rotary sliding vane heat-pump compressors , 1984 .