Critical role of small micropores in high CO2 uptake.

Microporous carbon materials with extremely small pore size are prepared by employing polyaniline as a carbon precursor and KOH as an activating agent. CO(2) sorption performance of the materials is systematically investigated at the temperatures of 0, 25 and 75 °C. The prepared carbons show very high CO(2) uptake of up to 1.86 and 1.39 mmol g(-1) under 1 bar, 75 °C and 0.15 bar, 25 °C, respectively. These values are amongst the highest CO(2) capture amounts of the known carbon materials. The relation between CO(2) uptake and pore size at different temperatures is studied. An interesting and innovative point that the micropores with pore size smaller than a critical value play a crucial role in CO(2) adsorption at different temperatures is demonstrated. It is found that the higher the sorption temperature is, the smaller this critical value of pore size is. Pores smaller than 0.54 nm are manifested to determine CO(2) capture capacity at high sorption temperature, e.g. 75 °C. This research proposes a basic principle for designing highly efficient CO(2) carbon adsorbents; that is, the adsorbents should be primarily rich in extremely small micropores.

[1]  K. Yao,et al.  Novel porous carbon materials with ultrahigh nitrogen contents for selective CO2 capture , 2012 .

[2]  Stefan Kaskel,et al.  Fungi-based porous carbons for CO2 adsorption and separation , 2012 .

[3]  L. Bergström,et al.  Strong and binder free structured zeolite sorbents with very high CO2-over-N2 selectivities and high capacities to adsorb CO2 rapidly , 2012 .

[4]  Zifeng Yan,et al.  Superior CO2 uptake of N-doped activated carbon through hydrogen-bonding interaction , 2012 .

[5]  E. Giannelis,et al.  Efficient CO2 Sorbents Based on Silica Foam with Ultra-large Mesopores , 2012 .

[6]  Jun Liu,et al.  Progress in adsorption-based CO2 capture by metal-organic frameworks. , 2012, Chemical Society reviews.

[7]  A. B. Fuertes,et al.  CO2 adsorption by activated templated carbons. , 2012, Journal of colloid and interface science.

[8]  W. Xing,et al.  Carbon dioxide adsorption performance of N-doped zeolite Y templated carbons , 2012 .

[9]  S. Deng,et al.  Adsorption of ethane, ethylene, propane, and propylene on a magnesium-based metal-organic framework. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[10]  Yury Gogotsi,et al.  Effect of pore size on carbon dioxide sorption by carbide derived carbon , 2011 .

[11]  Kenji Sumida,et al.  Evaluating metal–organic frameworks for post-combustion carbon dioxide capture via temperature swing adsorption , 2011 .

[12]  Antonio B. Fuertes,et al.  N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture , 2011 .

[13]  Tao Zhang,et al.  Structurally designed synthesis of mechanically stable poly(benzoxazine-co-resol)-based porous carbon monoliths and their application as high-performance CO2 capture sorbents. , 2011, Journal of the American Chemical Society.

[14]  R. Mokaya,et al.  Superior CO2 Adsorption Capacity on N‐doped, High‐Surface‐Area, Microporous Carbons Templated from Zeolite , 2011 .

[15]  J. J. Pis,et al.  Microporous phenol-formaldehyde resin-based adsorbents for pre-combustion CO2 capture , 2011 .

[16]  Antonio B. Fuertes,et al.  Sustainable porous carbons with a superior performance for CO2 capture , 2011 .

[17]  Peng Mei Mei,et al.  A direct synthesis of mesoporous carbon supported MgO sorbent for CO2 capture , 2011 .

[18]  C. Serre,et al.  Why hybrid porous solids capture greenhouse gases? , 2011, Chemical Society reviews.

[19]  S. Deng,et al.  Adsorption of CO2 and CH4 on a magnesium-based metal organic framework. , 2011, Journal of colloid and interface science.

[20]  M. Trachtenberg,et al.  Highly selective CO2 capture by a flexible microporous metal-organic framework (MMOF) material. , 2010, Chemistry.

[21]  Soojin Park,et al.  Effect of heat treatment on CO2 adsorption of KOH-activated graphite nanofibers. , 2010, Journal of colloid and interface science.

[22]  H. Bai,et al.  Continuous generation of mesoporous silica particles via the use of sodium metasilicate precursor and their potential for CO2 capture , 2010 .

[23]  Nilay Shah,et al.  An overview of CO2 capture technologies , 2010 .

[24]  D. Zhao,et al.  Facile synthesis of porous carbon nitride spheres with hierarchical three-dimensional mesostructures for CO2 capture , 2010 .

[25]  Seda Keskin,et al.  Can metal-organic framework materials play a useful role in large-scale carbon dioxide separations? , 2010, ChemSusChem.

[26]  Joaquín Silvestre-Albero,et al.  High-surface-area carbon molecular sieves for selective CO(2) adsorption. , 2010, ChemSusChem.

[27]  Haihui Wang,et al.  Enhancement of CO2 adsorption on high surface area activated carbon modified by N2, H2 and ammonia , 2010 .

[28]  Wen‐Cui Li,et al.  Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture , 2010, Advanced materials.

[29]  Byung-Joo Kim,et al.  Copper oxide-decorated porous carbons for carbon dioxide adsorption behaviors. , 2010, Journal of colloid and interface science.

[30]  Shuguang Deng,et al.  Adsorption of CO(2), CH(4), N(2)O, and N(2) on MOF-5, MOF-177, and zeolite 5A. , 2010, Environmental science & technology.

[31]  Shih-Chun Kuo,et al.  Adsorption of CO2 on Amine-Functionalized Y-Type Zeolites , 2010 .

[32]  Jihyun An,et al.  High and selective CO2 uptake in a cobalt adeninate metal-organic framework exhibiting pyrimidine- and amino-decorated pores. , 2010, Journal of the American Chemical Society.

[33]  M. Kanatzidis,et al.  An interpenetrated framework material with hysteretic CO(2) uptake. , 2010, Chemistry.

[34]  Sadao Araki,et al.  Preparation and CO(2) adsorption properties of aminopropyl-functionalized mesoporous silica microspheres. , 2009, Journal of colloid and interface science.

[35]  Gary T. Rochelle,et al.  Amine Scrubbing for CO2 Capture , 2009, Science.

[36]  J. J. Pis,et al.  Surface modification of activated carbons for CO2 capture , 2008 .

[37]  Covadonga Pevida,et al.  Silica-templated melamine–formaldehyde resin derived adsorbents for CO2 capture , 2008 .

[38]  A. Matzger,et al.  Dramatic tuning of carbon dioxide uptake via metal substitution in a coordination polymer with cylindrical pores. , 2008, Journal of the American Chemical Society.

[39]  Dianne E. Wiley,et al.  Reducing the Cost of CO2 Capture from Flue Gases Using Pressure Swing Adsorption , 2008 .

[40]  R. Mokaya,et al.  Enhanced hydrogen storage capacity of high surface area zeolite-like carbon materials. , 2007, Journal of the American Chemical Society.

[41]  Covadonga Pevida,et al.  Preparation of carbon dioxide adsorbents from the chemical activation of urea–formaldehyde and melamine–formaldehyde resins , 2007 .

[42]  Zhong Tang,et al.  CO2 capture by activated and impregnated anthracites , 2005 .

[43]  F. Béguin,et al.  Electrochemical energy storage in ordered porous carbon materials , 2005 .

[44]  Kristian Lindgren,et al.  Carbon Capture and Storage From Fossil Fuels and Biomass – Costs and Potential Role in Stabilizing the Atmosphere , 2006 .

[45]  D. Lozano‐Castelló,et al.  In situ small angle neutron scattering study of CD4 adsorption under pressure in activated carbons , 2001 .

[46]  Zou Yong,et al.  Adsorption of Carbon Dioxide on Chemically Modified High Surface Area Carbon-Based Adsorbents at High Temperature , 2001 .

[47]  D. Cazorla-Amorós,et al.  Theoretical and experimental studies of methane adsorption on microporous carbons , 1997 .

[48]  Timothy Christopher Golden,et al.  ACTIVATED CARBON FOR GAS SEPARATION AND STORAGE , 1996 .

[49]  R. T. Yang,et al.  Comparison of Activated Carbon and Zeolite 13X for CO2 Recovery from Flue-Gas by Pressure Swing Adsorption , 1995 .

[50]  R. T. Yang,et al.  Concentration and recovery of carbon dioxide from flue gas by pressure swing adsorption , 1993 .

[51]  R. Cracknell,et al.  Influence of pore geometry on the design of microporous materials for methane storage , 1993 .

[52]  D. H. Everett,et al.  Adsorption in slit-like and cylindrical micropores in the henry's law region. A model for the microporosity of carbons , 1976 .