Benchmarking energy performance of industrial small and medium-sized enterprises using an energy efficiency index: Results based on an energy audit policy program

Abstract Improved energy efficiency among industrial companies is recognized as a key effort to reduce emissions of greenhouse gases. In this context, benchmarking industrial energy efficiency plays an important part in increasing industrial companies' awareness of their energy efficiency potential. A method for calculating an energy efficiency index is proposed in this paper. The energy efficiency index is used to benchmark the energy performance of industrial small and medium-sized companies' support and production processes. This enables the possibility to compare the energy performance of single energy end-use processes. This paper's proposed energy efficiency index is applied to energy data from 11 sawmills that participated in the Swedish national energy audit program. The index values were compared with each sawmill's energy saving potential, as stated in the energy audits. One conclusion is that the energy efficiency index is suitable as an energy strategy tool in industrial energy management and could be used both by industrial SMEs and by governmental agencies with an auditing role. However, it does require a harmonized categorization of energy end-use processes as well as quality assured energy data. Given this, a national energy end-use database could be created to facilitate the calculation of an energy efficiency index.

[1]  Robert Lundmark,et al.  Energy efficiency and policy in Swedish pulp and paper mills: A data envelopment analysis approach , 2012 .

[2]  Ali Azadeh,et al.  An integrated DEA PCA numerical taxonomy approach for energy efficiency assessment and consumption optimization in energy intensive manufacturing sectors , 2007 .

[3]  Patrik Thollander,et al.  Energy management in industry – a systematic review of previous findings and an integrative conceptual framework , 2016 .

[4]  Jean-Thomas Bernard,et al.  The measurement of the energy intensity of manufacturing industries: a principal components analysis , 2005 .

[5]  Deger Saygin,et al.  Benchmarking the energy use of energy-intensive industries in industrialized and in developing countries , 2011 .

[6]  Anupama Prashar,et al.  Adopting PDCA (Plan-Do-Check-Act) cycle for energy optimization in energy-intensive SMEs , 2017 .

[7]  Patrik Thollander,et al.  Extending the Energy efficiency gap , 2012 .

[8]  J. Swisher,et al.  Exploring the gap : Top-down versus bottom-up analyses of the cost of mitigating global warming , 1993 .

[9]  Alan P. Rossiter,et al.  Energy Management and Efficiency for the Process Industries , 2015 .

[10]  Magnus Karlsson,et al.  International study on energy end-use data among industrial SMEs (small and medium-sized enterprises) and energy end-use efficiency improvement opportunities , 2015 .

[11]  Anders Lycken,et al.  State of the art – Energianvändning i den svenska sågverksindustrin , 2011 .

[12]  Alfred J. Hildreth,et al.  Estimating the Technical Improvement of Energy Efficiency in the Automotive Industry—Stochastic and Deterministic Frontier Benchmarking Approaches , 2014 .

[13]  Mingqi Liu,et al.  Constructing an energy efficiency benchmarking system for coal production , 2016 .

[14]  Aie,et al.  Tracking Industrial Energy Efficiency and CO2 Emissions , 2007 .

[15]  A. Jaffe,et al.  The energy-efficiency gap What does it mean? , 1994 .

[16]  Julia Sachs,et al.  Evaluating Energy Efficiency Improvements in Manufacturing Processes , 2009, APMS.

[17]  Farhad Hosseinzadeh Lotfi,et al.  An analysis of the implementation of energy efficiency measures in the vegetable oil industry of Iran: a data envelopment analysis approach , 2013 .

[18]  Norman Bourassa,et al.  Action-oriented Benchmarking: Using the CEUS Database to Benchmark Commercial Buildings in California , 2008 .

[19]  Ramachandran Kannan,et al.  Energy management practices in SME––case study of a bakery in Germany , 2003 .

[20]  Kanako Tanaka,et al.  Assessment of energy efficiency performance measures in industry and their application for policy , 2008 .

[21]  Ernst Worrell,et al.  Benchmarking energy use in the paper industry: a benchmarking study on process unit level , 2013 .

[22]  Evan Mills.  Action-Oriented Energy Benchmarking for Nonresidential Buildings , 2016, Proceedings of the IEEE.

[23]  Ray D. Peterson,et al.  Elements of an energy management program , 2009 .

[24]  Marilyn A Brown,et al.  Closing the efficiency gap: barriers to the efficient use of energy , 1990 .

[25]  Semida Silveira,et al.  Capturing energy efficiency in European iron and steel production—comparing specific energy consumption and Malmquist productivity index , 2014 .

[26]  Jeffrey J. Morrell,et al.  Heartwood formation and natural durability - a review , 2002 .

[27]  William Chung,et al.  Review of building energy-use performance benchmarking methodologies , 2011 .

[28]  E. Worrell,et al.  Barriers to energy efficiency in industrial bottom-up energy demand models—A review , 2011 .

[29]  Salvatore Manco,et al.  Energy efficiency measurement in industrial processes , 2012 .

[30]  Ernst Worrell,et al.  An Integrated Benchmarking and Energy Savings Tool for the Iron and Steel Industry , 2006 .

[31]  Patrik Thollander,et al.  Ex-post impact and process evaluation of the Swedish energy audit policy programme for small and medium-sized enterprises , 2016 .

[32]  Xiaolong Xue,et al.  Measuring energy consumption efficiency of the construction industry: the case of China , 2015 .

[33]  Steinar Kvale,et al.  Den kvalitativa forskningsintervjun , 2014 .

[34]  Jon S. Towslee.  Energy Management Key Performance Indicators (EnPIs) and Energy Dashboards , 2015 .

[35]  Xiaolong Xue,et al.  Measuring the Productivity of Energy Consumption of Major Industries in China: A DEA-Based Method , 2014 .

[36]  Nan Zhou,et al.  Analysis and practices of energy benchmarking for industry from the perspective of systems engineering , 2013 .

[37]  Martijn G. Rietbergen,et al.  Setting SMART targets for industrial energy use and industrial energy efficiency. , 2010 .

[38]  Christoph Herrmann,et al.  Energy efficiency benchmarking for injection moulding processes , 2015 .

[39]  B. Sturm,et al.  Energy efficiency, carbon emissions, and measures towards their improvement in the food and beverage sector for six European countries , 2016 .

[40]  Patrik Thollander,et al.  Quantifying the extended energy efficiency gap-evidence from Swedish electricity-intensive industries , 2015 .

[41]  Luigi Crema,et al.  Energy efficiency and sustainability assessment of about 500 small and medium-sized enterprises in Central Europe region , 2017 .

[42]  Enrique Mateos-Espejel,et al.  Base case process development for energy efficiency improvement, application to a Kraft pulping mill. Part II: Benchmarking analysis , 2011 .

[43]  Ali Hasanbeigi,et al.  Comparison analysis of energy intensity for five major sub-sectors of the Textile Industry in Iran , 2012 .

[44]  Anders Lycken,et al.  Dokumentation till sågverksmodellen inom projekt EESI – Energi Effektivisering i SågverksIndustrin , 2011 .

[45]  Gale A. Boyd,et al.  Comparing the statistical distributions of energy efficiency in manufacturing: meta-analysis of 24 Case studies to develop industry-specific energy performance indicators (EPI) , 2017 .

[46]  S. Sorrell.  The economics of energy service contracts , 2007 .

[47]  Paul Schönsleben,et al.  Integrating energy efficiency performance in production management – gap analysis between industrial needs and scientific literature , 2011 .

[48]  Patrick E. Phelan,et al.  Assessing the relative efficiency of energy use among similar manufacturing industries , 2011 .

[49]  Tengfang Xu,et al.  Characterization of energy use and performance of global cheese processing. , 2009 .

[50]  Semih Önüt,et al.  Analysis of energy use and efficiency in Turkish manufacturing sector SMEs , 2007 .

[51]  Johan Oja,et al.  Sapwood moisture-content measurements in Pinus sylvestris sawlogs combining X-ray and three-dimensional scanning , 2010 .

[52]  Marco Taisch,et al.  Energy management in production: A novel method to develop key performance indicators for improving energy efficiency , 2015 .