论文信息 - Three-dimensional Finite Element Solution of the Lagrangian Equations for the Frequency-Temperature Behavior of Y-Cut and NT-Cut Bars - 字舞流文

Three-dimensional Finite Element Solution of the Lagrangian Equations for the Frequency-Temperature Behavior of Y-Cut and NT-Cut Bars

Y. Yong | Y. K. Yong

[1] Pcy Lee,et al. Frequency‐temperature behavior of thickness vibrations of doubly rotated quartz plates affected by plate dimensions and orientations , 1986 .

[2] R. Guyan. Reduction of stiffness and mass matrices , 1965 .

[3] Pcy Lee,et al. Frequency-Temperature Behavior of Flexural and Thickness-Shear Vibrations of Rectangular Rotated Y-Cut Quartz Plates , 1985, 39th Annual Symposium on Frequency Control.

[4] X. Markenscoff,et al. High−frequency vibrations of crystal plates under initial stresses , 1975 .

[5] E. Momosaki,et al. New Quartz Tuning Fork with Very Low Temperature Coefficient , 1979 .

[6] M. Nakazawa,et al. Frequency-Temperature Characteristics of Quartz Crystal Flexure Bars and Quartz Crystal Tuning Forks , 1979, IEEE Transactions on Sonics and Ultrasonics.

[7] T. J. Lukaszek,et al. Higher-Order Temperature Coefficients of the Elastic Stiffinesses and Compliances of Alpha-Quartz , 1962, Proceedings of the IRE.

[8] S. Kanbayashi,et al. Analysis of Tuning Fork Crystal Units and Application Into Electronic Wrist Watches , 1976 .

[9] K. Sato,et al. Second-Mode Tuning Forks for High Frequencies: Finite Element Analysis and Experiments , 1980, IEEE Transactions on Sonics and Ultrasonics.