Advanced Nanomaterials, Printing Processes, and Applications for Flexible Hybrid Electronics

Recent advances in nanomaterial preparation and printing technologies provide unique opportunities to develop flexible hybrid electronics (FHE) for various healthcare applications. Unlike the costly, multi-step, and error-prone cleanroom-based nano-microfabrication, the printing of nanomaterials offers advantages, including cost-effectiveness, high-throughput, reliability, and scalability. Here, this review summarizes the most up-to-date nanomaterials, methods of nanomaterial printing, and system integrations to fabricate advanced FHE in wearable and implantable applications. Detailed strategies to enhance the resolution, uniformity, flexibility, and durability of nanomaterial printing are summarized. We discuss the sensitivity, functionality, and performance of recently reported printed electronics with application areas in wearable sensors, prosthetics, and health monitoring implantable systems. Collectively, the main contribution of this paper is in the summary of the essential requirements of material properties, mechanisms for printed sensors, and electronics.

[1]  Doyoung Byun,et al.  One-Step Sub-micrometer-Scale Electrohydrodynamic Inkjet Three-Dimensional Printing Technique with Spontaneous Nanoscale Joule Heating. , 2017, ACS applied materials & interfaces.

[2]  Terence G. Henares,et al.  Paper-based inkjet-printed microfluidic analytical devices. , 2015, Angewandte Chemie.

[3]  William Regan,et al.  Graphene as a long-term metal oxidation barrier: worse than nothing. , 2013, ACS nano.

[4]  Yue Wu,et al.  Inkjet Printing of Single‐Crystalline Bi2Te3 Thermoelectric Nanowire Networks , 2017 .

[5]  T. Ren,et al.  A novel compact heat exchanger using gap flow mechanism. , 2015, The Review of scientific instruments.

[6]  Tae Whan Kim,et al.  Fluorescent Microarrays of in Situ Crystallized Perovskite Nanocomposites Fabricated for Patterned Applications by Using Inkjet Printing. , 2019, ACS nano.

[7]  Jacob J. Adams,et al.  Microwave dielectric properties of zirconia fabricated using NanoParticle Jetting™ , 2019, Additive Manufacturing.

[8]  Carmel Majidi,et al.  EGaIn‐Assisted Room‐Temperature Sintering of Silver Nanoparticles for Stretchable, Inkjet‐Printed, Thin‐Film Electronics , 2018, Advanced materials.

[9]  George M Whitesides,et al.  Inkjet Printing of Conductive Inks with High Lateral Resolution on Omniphobic “RF Paper” for Paper‐Based Electronics and MEMS , 2014, Advanced materials.

[10]  Xuanhe Zhao,et al.  3D printing of conducting polymers , 2020, Nature Communications.

[11]  B. Derby.  Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution , 2010 .

[12]  Y. Liao,et al.  Inkjet-printed transparent nanowire thin film features for UV photodetectors , 2015 .

[13]  Y. Choa,et al.  Green Manufacturing of Highly Conductive Cu2O and Cu Nanoparticles for Photonic-Sintered Printed Electronics , 2019, ACS Applied Electronic Materials.

[14]  René Kizek,et al.  Methods for carbon nanotubes synthesis—review , 2011 .

[15]  S. Ko,et al.  Highly Stretchable and Highly Conductive Metal Electrode by Very Long Metal Nanowire Percolation Network , 2012, Advanced materials.

[16]  Hye Rim Cho,et al.  Stretchable and Transparent Biointerface Using Cell‐Sheet–Graphene Hybrid for Electrophysiology and Therapy of Skeletal Muscle , 2016 .

[17]  Thomas Speck,et al.  Biological Archetypes for Self-Healing Materials , 2015 .

[18]  Qingshen Jing,et al.  Enhanced thermoelectric properties of flexible aerosol-jet printed carbon nanotube-based nanocomposites , 2018, APL Materials.

[19]  Junghwan Byun,et al.  Negatively Strain‐Dependent Electrical Resistance of Magnetically Arranged Nickel Composites: Application to Highly Stretchable Electrodes and Stretchable Lighting Devices , 2014, Advanced materials.

[20]  Woo Jin Hyun,et al.  High‐Resolution Patterning of Graphene by Screen Printing with a Silicon Stencil for Highly Flexible Printed Electronics , 2015, Advanced materials.

[21]  Qiu Jiang,et al.  MXene Printing and Patterned Coating for Device Applications , 2020, Advanced materials.

[22]  Benjamin J Wiley,et al.  The Growth Mechanism of Copper Nanowires and Their Properties in Flexible, Transparent Conducting Films , 2010, Advanced materials.

[23]  Jiajie Liang,et al.  Recent Development of Printed Micro‐Supercapacitors: Printable Materials, Printing Technologies, and Perspectives , 2019, Advanced materials.

[24]  J. Coleman,et al.  Flexible, transparent, conducting films of randomly stacked graphene from surfactant-stabilized, oxide-free graphene dispersions. , 2010, Small.

[25]  Suresh Neethirajan,et al.  Noninvasive Label-Free Detection of Cortisol and Lactate Using Graphene Embedded Screen-Printed Electrode , 2018, Nano-micro letters.

[26]  Ying Sun,et al.  Coalescence, evaporation and particle deposition of consecutively printed colloidal drops , 2012 .

[27]  Ji Woong Yu,et al.  Highly conductive, stretchable and biocompatible Ag–Au core–sheath nanowire composite for wearable and implantable bioelectronics , 2018, Nature Nanotechnology.

[28]  Y. Choa,et al.  Ultrathin, long-term stable, solid-state reference electrode enabled by enhanced interfacial adhesion and conformal coating of AgCl , 2020 .

[29]  V. Subramanian,et al.  Inkjet-printed line morphologies and temperature control of the coffee ring effect. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[30]  A. A. Tomchenko.  Printed Chemical Sensors: from Screen- Printing to Microprinting , 2011 .

[31]  John A Rogers,et al.  High-resolution electrohydrodynamic jet printing. , 2007, Nature materials.

[32]  Horst Hahn,et al.  A general route toward complete room temperature processing of printed and high performance oxide electronics. , 2015, ACS nano.

[33]  Husam N. Alshareef,et al.  Self‐Healing and Stretchable 3D‐Printed Organic Thermoelectrics , 2019, Advanced Functional Materials.

[34]  T. Tarn,et al.  Recent advances in inkjet printing synthesis of functional metal oxides , 2015 .

[35]  Seungjun Chung,et al.  Transparent Large-Area MoS2 Phototransistors with Inkjet-Printed Components on Flexible Platforms. , 2017, ACS nano.

[36]  T. Dupont,et al.  Capillary flow as the cause of ring stains from dried liquid drops , 1997, Nature.

[37]  T. Arie,et al.  Fully printed flexible fingerprint-like three-axis tactile and slip force and temperature sensors for artificial skin. , 2014, ACS nano.

[38]  C. Santini,et al.  Influence of the self-organization of ionic liquids on the size of ruthenium nanoparticles: Effect of the temperature and stirring , 2007 .

[39]  Juliane Junker,et al.  Medical Instrumentation Application And Design , 2016 .

[40]  J. Coleman,et al.  Liquid phase production of graphene by exfoliation of graphite in surfactant/water solutions , 2008, 0809.2690.

[41]  Xiaojiang Yang,et al.  Effect of the different shapes of silver particles in conductive ink on electrical performance and microstructure of the conductive tracks , 2012, Journal of Materials Science: Materials in Electronics.

[42]  S. Jung,et al.  Enhancing Adhesion of Screen‐Printed Silver Nanopaste Films , 2015 .

[43]  Insang You,et al.  Material approaches to stretchable strain sensors. , 2015, Chemphyschem : a European journal of chemical physics and physical chemistry.

[44]  Inyoung Kim,et al.  A Simple Process for Synthesis of Ag Nanoparticles and Sintering of Conductive Ink for Use in Printed Electronics , 2011, Journal of Electronic Materials.

[45]  John A Rogers,et al.  Bio-Integrated Wearable Systems: A Comprehensive Review. , 2019, Chemical reviews.

[46]  Hongbo Wang,et al.  Significance of Nanomaterials in Wearables: A Review on Wearable Actuators and Sensors , 2018, Advanced materials.

[47]  W. Yeo,et al.  Fully Printed, Wireless, Stretchable Implantable Biosystem toward Batteryless, Real‐Time Monitoring of Cerebral Aneurysm Hemodynamics , 2019, Advanced science.

[48]  R. Soukup,et al.  Organic based sensors: Novel screen printing technique for sensing layers deposition , 2012, 2012 35th International Spring Seminar on Electronics Technology.

[49]  Robert T. Collins,et al.  Breakup of electrified jets , 2004, Journal of Fluid Mechanics.

[50]  Yan Wang,et al.  Flexible RFID Tag Metal Antenna on Paper‐Based Substrate by Inkjet Printing Technology , 2019, Advanced Functional Materials.

[51]  Doyoung Byun,et al.  Invisible metal-grid transparent electrode prepared by electrohydrodynamic (EHD) jet printing , 2013 .

[52]  J. Coleman,et al.  Additive-free MXene inks and direct printing of micro-supercapacitors , 2019, Nature Communications.

[53]  C. Mottolese,et al.  Management of unruptured cerebral aneurysms. , 1996, Neurological research.

[54]  Dhanushkodi D. Mariappan,et al.  Ultrathin high-resolution flexographic printing using nanoporous stamps , 2016, Science Advances.

[55]  Nasser Peyghambarian,et al.  Screen printing for the fabrication of organic light-emitting devices , 2001, SPIE Optics + Photonics.

[56]  M. Hsieh,et al.  Electrically conductive lines on cellulose nanopaper for flexible electrical devices. , 2013, Nanoscale.

[57]  Tim C. Claypole,et al.  Flexographic printing of ultra-thin semiconductor polymer layers , 2016 .

[58]  Yong Wei,et al.  Highly Stable and Sensitive Paper-Based Bending Sensor Using Silver Nanowires/Layered Double Hydroxides Hybrids. , 2015, ACS applied materials & interfaces.

[59]  Peter L. Fuhr,et al.  Fabrication of Low Cost Surface Acoustic Wave Sensors Using Direct Printing by Aerosol Inkjet , 2018, IEEE Access.

[60]  Zhiqiang Niu,et al.  Ultrathin Epitaxial Cu@Au Core-Shell Nanowires for Stable Transparent Conductors. , 2017, Journal of the American Chemical Society.

[61]  Antonio Facchetti,et al.  Mechanically Flexible Conductors for Stretchable and Wearable E‐Skin and E‐Textile Devices , 2019, Advanced materials.

[62]  Ibrahim T. Ozbolat,et al.  Inkjet Printing of Self‐Assembled 2D Titanium Carbide and Protein Electrodes for Stimuli‐Responsive Electromagnetic Shielding , 2018, Advanced Functional Materials.

[63]  Wei Wu.  Inorganic nanomaterials for printed electronics: a review. , 2017, Nanoscale.

[64]  Xiangyang Liu,et al.  Formulation of Screen Printable Cu Molecular ink for Conductive/Flexible/Solderable Cu Traces. , 2019, ACS applied materials & interfaces.

[65]  M. Ger,et al.  A novel method to produce Pd nanoparticle ink for ink-jet printing technology , 2009 .

[66]  Noel Clark,et al.  Organic photovoltaic modules fabricated by an industrial gravure printing proofer , 2013 .

[67]  Huaqiang Wu,et al.  Monolithic integration of flexible lithium-ion battery on a plastic substrate by printing methods , 2019, Nano Research.

[68]  Jiankang He,et al.  Micro/nanoscale electrohydrodynamic printing: from 2D to 3D. , 2016, Nanoscale.

[69]  C. Casiraghi,et al.  Water-based and inkjet printable inks made by electrochemically exfoliated graphene , 2019, Carbon.

[70]  J. Lavèn,et al.  Conductive Screen Printing Inks by Gelation of Graphene Dispersions , 2016 .

[71]  Tuck Wah Ng,et al.  A Dynamic Graphene Oxide Network Enables Spray Printing of Colloidal Gels for High‐Performance Micro‐Supercapacitors , 2019, Advanced materials.

[72]  Seung-Hyun Lee,et al.  Mechanical and environmental durability of roll-to-roll printed silver nanoparticle film using a rapid laser annealing process for flexible electronics , 2014, Microelectron. Reliab..

[73]  S. Magdassi,et al.  Conductive nanomaterials for 2D and 3D printed flexible electronics. , 2019, Chemical Society reviews.

[74]  Rahul Panat,et al.  Three-dimensional microarchitected materials and devices using nanoparticle assembly by pointwise spatial printing , 2017, Science Advances.

[75]  A. Ciesielski,et al.  Graphene via sonication assisted liquid-phase exfoliation. , 2014, Chemical Society reviews.

[76]  Yanlin Song,et al.  Controllable Printing Droplets for High‐Resolution Patterns , 2014, Advanced materials.

[77]  L. Janssen,et al.  The role of electrochemistry and electrochemical technology in environmental protection , 2002 .

[78]  S. Chattopadhyaya,et al.  Characterization of AuNPs based ink for inkjet printing of low cost paper based sensors , 2020 .

[79]  N. C. Tien,et al.  Multilayer passive RF microfabrication using jet-printed au nanoparticle ink and aerosol-deposited dielectric , 2013, 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII).

[80]  M. Desmulliez,et al.  Inkjet printing of conductive materials: a review , 2012 .

[81]  Yanlin Song,et al.  Inkjet printing wearable electronic devices , 2017 .

[82]  Seungjun Chung,et al.  Inkjet-printed stretchable silver electrode on wave structured elastomeric substrate , 2011 .

[83]  B. Wiley,et al.  Integrating simulations and experiments to predict sheet resistance and optical transmittance in nanowire films for transparent conductors. , 2013, ACS nano.

[84]  Development of plasma-assisted inkjet printing and demonstration for direct printing of conductive silver line , 2018, Journal of Physics D: Applied Physics.

[85]  Zhuang Xie,et al.  Matrix‐Assisted Catalytic Printing for the Fabrication of Multiscale, Flexible, Foldable, and Stretchable Metal Conductors , 2013, Advanced materials.

[86]  A. Ferrari,et al.  Inkjet-printed graphene electronics. , 2011, ACS nano.

[87]  Shanyong Chen,et al.  A water-based silver nanowire ink for large-scale flexible transparent conductive films and touch screens , 2017 .

[88]  Luke Renaud,et al.  Aerosol based direct-write micro-additive fabrication method for sub-mm 3D metal-dielectric structures , 2015 .

[89]  Peihua Yang,et al.  High‐Resolution Inkjet Printing of Quantum Dot Light‐Emitting Microdiode Arrays , 2019, Advanced Optical Materials.

[90]  Jiantong Li,et al.  Inkjet Printing of MoS2 , 2014 .

[91]  Sunho Jeong,et al.  Reducible‐Shell‐Derived Pure‐Copper‐Nanowire Network and Its Application to Transparent Conducting Electrodes , 2016 .

[92]  Caofeng Pan,et al.  Fabrication of Large‐Area Bimodal Sensors by All‐Inkjet‐Printing , 2019, Advanced Materials Technologies.

[93]  Sung-hoon Ahn,et al.  Direct printing of highly sensitive, stretchable, and durable strain sensor based on silver nanoparticles/multi-walled carbon nanotubes composites , 2019, Composites Part B: Engineering.

[94]  Qiuquan Guo,et al.  Fabrication of flexible copper-based electronics with high-resolution and high-conductivity on paper via inkjet printing , 2014 .

[95]  Matiar M. R. Howlader,et al.  Inkjet Printing of a Highly Loaded Palladium Ink for Integrated, Low‐Cost pH Sensors , 2016 .

[96]  A. Bandodkar,et al.  Advanced Materials for Printed Wearable Electrochemical Devices: A Review , 2017 .

[97]  Zhangwei Chen,et al.  Inkjet-printed MXene micro-scale devices for integrated broadband ultrafast photonics , 2019, npj 2D Materials and Applications.

[98]  Yanlin Song,et al.  Printing Patterned Fine 3D Structures by Manipulating the Three Phase Contact Line , 2015 .

[99]  M. Muhammed,et al.  Efficient Inkjet Printing of Graphene , 2013, Advanced materials.

[100]  Zhibin Yu,et al.  Direct Printing for Additive Patterning of Silver Nanowires for Stretchable Sensor and Display Applications , 2018 .

[101]  Christoph J. Brabec,et al.  Inkjet printed silver nanowire percolation networks as electrodes for highly efficient semitransparent organic solar cells , 2016 .

[102]  Duangjai Nacapricha,et al.  T-shirt ink for one-step screen-printing of hydrophobic barriers for 2D- and 3D-microfluidic paper-based analytical devices. , 2019, Talanta.

[103]  John A. Rogers,et al.  Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes , 2009, Science.

[104]  B. Wiley,et al.  Modulating the Growth Rate, Aspect Ratio, and Yield of Copper Nanowires with Alkylamines , 2018 .

[105]  Michael Bruns,et al.  Room‐Temperature Processing of Printed Oxide FETs Using Ultraviolet Photonic Curing , 2017 .

[106]  Jae‐Woong Jeong,et al.  Advanced Soft Materials, Sensor Integrations, and Applications of Wearable Flexible Hybrid Electronics in Healthcare, Energy, and Environment , 2019, Advanced materials.

[107]  Ralf Preu,et al.  Advanced screen printing technique for high definition front side metallization of crystalline silicon solar cells , 2010 .

[108]  Shlomo Magdassi,et al.  Transparent conductive coatings by printing coffee ring arrays obtained at room temperature. , 2009, ACS nano.

[109]  Kevin Robbie,et al.  Nanomaterials and nanoparticles: Sources and toxicity , 2007, Biointerphases.

[110]  G. Cheng,et al.  Crystalline Nanojoining Silver Nanowire Percolated Networks on Flexible Substrate. , 2015, ACS nano.

[111]  Sunshin Jung,et al.  Rapid Cellulose-Mediated Microwave Sintering for High-Conductivity Ag Patterns on Paper. , 2016, ACS applied materials & interfaces.

[112]  C. Ye,et al.  Flexible Transparent Conductive Films on the Basis of Ag Nanowires: Design and Applications: A Review , 2015 .

[113]  Wangzhou Shi,et al.  Gravure printing of hybrid MoS2@S-rGO interdigitated electrodes for flexible microsupercapacitors , 2015 .

[114]  C. Böttcher,et al.  Synthesis and Aggregation Properties of Water‐Soluble Newkome‐Dendronized Perylenetetracarboxdiimides , 2007 .

[115]  Makoto Mizukami,et al.  Fully-printed high-performance organic thin-film transistors and circuitry on one-micron-thick polymer films , 2014, Nature Communications.

[116]  Yi Cui,et al.  Performance enhancement of metal nanowire transparent conducting electrodes by mesoscale metal wires , 2013, Nature Communications.

[117]  Pradeep Lall,et al.  Effect of Print Parameters on Print Consistency of Aerosol Jet Printed Electronics , 2019, 2019 18th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

[118]  Boris Murmann,et al.  Stretchable temperature-sensing circuits with strain suppression based on carbon nanotube transistors , 2018 .

[119]  Jonathan Stringer,et al.  Formation and stability of lines produced by inkjet printing. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[120]  Lianqing Liu,et al.  Tip-assisted electrohydrodynamic jet printing for high-resolution microdroplet deposition , 2019, Materials & Design.

[121]  Ran Cao,et al.  A Breathable and Screen‐Printed Pressure Sensor Based on Nanofiber Membranes for Electronic Skins , 2018 .

[122]  Michael Smith,et al.  Controlling and assessing the quality of aerosol jet printed features for large area and flexible electronics , 2017 .

[123]  L. Francis,et al.  Optimization of aerosol jet printing for high-resolution, high-aspect ratio silver lines. , 2013, ACS applied materials & interfaces.

[124]  Ki Jun Yu,et al.  Soft, wireless periocular wearable electronics for real-time detection of eye vergence in a virtual reality toward mobile eye therapies , 2020, Science Advances.

[125]  Jang‐Ung Park,et al.  Air-stable, surface-oxide free Cu nanoparticles for highly conductive Cu ink and their application to printed graphene transistors , 2013 .

[126]  Yong Zhu,et al.  Nanomaterial‐Enabled Wearable Sensors for Healthcare , 2018, Advanced healthcare materials.

[127]  K. Shin,et al.  Active Digital Microfluidic Paper Chips with Inkjet‐Printed Patterned Electrodes , 2014, Advanced materials.

[128]  C. Canali,et al.  Wurtzite (Ga,Mn)As nanowire shells with ferromagnetic properties. , 2017, Nanoscale.

[129]  W. Schuette,et al.  Polyol Synthesis of Silver Nanowires by Heterogeneous Nucleation; Mechanistic Aspects Influencing Nanowire Diameter and Length , 2014 .

[130]  Zhenzhu He,et al.  Programmable Liquid Adhesion on Bio-Inspired Re-Entrant Structures. , 2019, Small.

[131]  Katsuaki Suganuma,et al.  Inkjet-printed lines with well-defined morphologies and low electrical resistance on repellent pore-structured polyimide films. , 2012, ACS applied materials & interfaces.

[132]  Leandro Lorenzelli,et al.  Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review , 2015, IEEE Sensors Journal.

[133]  A. Chiolerio,et al.  Silver nanoparticle ink technology: state of the art , 2016, Nanotechnology, science and applications.

[134]  Ben Wang,et al.  Conductivity enhancement of aerosol-jet printed electronics by using silver nanoparticles ink with carbon nanotubes , 2012 .

[135]  Liangcai Zeng,et al.  Fabrication and evaluation of a protruding Si-based printhead for electrohydrodynamic jet printing , 2017 .

[136]  Melkie Getnet Tadesse,et al.  Electrically conductive highly elastic polyamide/lycra fabric treated with PEDOT:PSS and polyurethane , 2019, Journal of Materials Science.

[137]  Ka Ming Ng,et al.  High-concentration copper nanoparticles synthesis process for screen-printing conductive paste on flexible substrate , 2015, Journal of Nanoparticle Research.

[138]  A. E. Del Río Castillo,et al.  Scalable Production of Graphene Inks via Wet‐Jet Milling Exfoliation for Screen‐Printed Micro‐Supercapacitors , 2019, Advanced Functional Materials.

[139]  M. Renn,et al.  Printing conformal electronics on 3D structures with Aerosol Jet technology , 2012, 2012 Future of Instrumentation International Workshop (FIIW) Proceedings.

[140]  Hanna Haverinen,et al.  In Situ synthesis of self-assembled gold nanoparticles on glass or silicon substrates through reactive inkjet printing. , 2014, Angewandte Chemie.

[141]  V. Rajendran,et al.  All-printed, interdigitated, freestanding serpentine interconnects based flexible solid state supercapacitor for self powered wearable electronics , 2019, Nano Energy.

[142]  Hyun Wook Kang,et al.  Flexible supercapacitor fabrication by room temperature rapid laser processing of roll-to-roll printed metal nanoparticle ink for wearable electronics application , 2014 .

[143]  S. Magdassi,et al.  Inkjet printing of flexible high-performance carbon nanotube transparent conductive films by "coffee ring effect". , 2014, Nanoscale.

[144]  A. Greentree,et al.  UV plasmonic properties of colloidal liquid-metal eutectic gallium-indium alloy nanoparticles , 2018, Scientific Reports.

[145]  Sung-Hyeon Park,et al.  A highly reliable copper nanowire/nanoparticle ink pattern with high conductivity on flexible substrate prepared via a flash light-sintering technique. , 2015, ACS applied materials & interfaces.

[146]  Kye-Si Kwon,et al.  A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors , 2015, Scientific Reports.

[147]  Yiwei Han,et al.  Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics. , 2018, Nanoscale.

[148]  Yiwei Han,et al.  Electrohydrodynamic (EHD) Printing of Molten Metal Ink for Flexible and Stretchable Conductor with Self‐Healing Capability , 2018 .

[149]  Jingxia Wang,et al.  Inkjet Printing Patterned Photonic Crystal Domes for Wide Viewing‐Angle Displays by Controlling the Sliding Three Phase Contact Line , 2014 .

[150]  Huafeng Yang,et al.  Water-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures. , 2017, Nature nanotechnology.

[151]  Jiankang He,et al.  Electrohydrodynamic 3D printing of microscale poly (ε-caprolactone) scaffolds with multi-walled carbon nanotubes , 2017, Biofabrication.

[152]  Jiankang He,et al.  Electrohydrodynamic Printing of Microscale PEDOT:PSS-PEO Features with Tunable Conductive/Thermal Properties. , 2018, ACS applied materials & interfaces.

[153]  Seung Hwan Ko,et al.  All-solid-state flexible supercapacitors by fast laser annealing of printed metal nanoparticle layers , 2015 .

[154]  Tomi Mattila,et al.  Electrical sintering of nanoparticle structures , 2008, Nanotechnology.

[155]  Haekyoung Kim,et al.  Patterned silver nanowires using the gravure printing process for flexible applications , 2015 .

[156]  Petri Ihalainen,et al.  Inkjet-printed gold electrodes on paper: characterization and functionalization. , 2012, ACS applied materials & interfaces.

[157]  Woon-Hong Yeo,et al.  Soft Material-Enabled, Flexible Hybrid Electronics for Medicine, Healthcare, and Human-Machine Interfaces , 2018, Materials.

[158]  Yanchun Han,et al.  Symmetric and uniform coalescence of ink-jetting printed polyfluorene ink drops by controlling the droplet spacing distance and ink surface tension/viscosity ratio , 2017 .

[159]  H. Fujita,et al.  MEMS-Controlled Paper-Like Transmissive Flexible Display , 2010, Journal of Microelectromechanical Systems.

[160]  E. Morallón,et al.  A stretchable and screen-printed electrochemical sensor for glucose determination in human perspiration. , 2017, Biosensors & bioelectronics.

[161]  W. Yeo,et al.  Advances in Materials for Recent Low-Profile Implantable Bioelectronics , 2018, Materials.

[162]  Sin Kwon,et al.  Control of thermal deformation with photonic sintering of ultrathin nanowire transparent electrodes. , 2020, Nanoscale.

[163]  Duncan N. Johnstone,et al.  Microfluidization of Graphite and Formulation of Graphene-Based Conductive Inks , 2016, ACS nano.

[164]  Yanlin Song,et al.  Controlled Inkjetting of a Conductive Pattern of Silver Nanoparticles Based on the Coffee‐Ring Effect , 2013, Advanced materials.

[165]  Lianxi Zheng,et al.  Structure‐Dependent Electrical Properties of Carbon Nanotube Fibers , 2007 .

[166]  Maliwan Amatatongchai,et al.  Screen-printed microfluidic paper-based analytical device (μPAD) as a barcode sensor for magnesium detection using rubber latex waste as a novel hydrophobic reagent. , 2019, Analytica chimica acta.

[167]  Kean C. Aw,et al.  Highly stretchable printed strain sensors using multi-walled carbon nanotube/silicone rubber composites , 2017 .

[168]  Shinjae Kwon,et al.  Wireless, Flexible, Ion-Selective Electrode System for Selective and Repeatable Detection of Sodium , 2020, Sensors.

[169]  Yong Zhu,et al.  Gravure Printing of Water-based Silver Nanowire ink on Plastic Substrate for Flexible Electronics , 2018, Scientific Reports.

[170]  J. Windmiller,et al.  Electrochemical tattoo biosensors for real-time noninvasive lactate monitoring in human perspiration. , 2013, Analytical chemistry.

[171]  T. Fujigaya,et al.  Methodology for homogeneous dispersion of single-walled carbon nanotubes by physical modification , 2008 .

[172]  Woon-Hong Yeo,et al.  Fully portable and wireless universal brain–machine interfaces enabled by flexible scalp electronics and deep learning algorithm , 2019, Nature Machine Intelligence.

[173]  Uli Lemmer,et al.  Rheological and Drying Considerations for Uniformly Gravure‐Printed Layers: Towards Large‐Area Flexible Organic Light‐Emitting Diodes , 2013 .

[174]  K. Suganuma,et al.  Electrical functionality of inkjet-printed silver nanoparticle conductive tracks on nanostructured paper compared with those on plastic substrates , 2013 .

[175]  M. Renn,et al.  High Performance Flexible Temperature Sensors via Nanoparticle Printing , 2019, ACS Applied Nano Materials.

[176]  Jiangyu Li,et al.  Nanoscale coaxial focused electrohydrodynamic jet printing. , 2018, Nanoscale.

[177]  Claire M. Cobley,et al.  Controlling the synthesis and assembly of silver nanostructures for plasmonic applications. , 2011, Chemical reviews.

[178]  Yongqiang Wen,et al.  Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics , 2011, Nanotechnology.

[179]  Jurriaan Huskens,et al.  Fabrication of Transistors on Flexible Substrates: from Mass‐Printing to High‐Resolution Alternative Lithography Strategies , 2012, Advanced materials.

[180]  Wi Hyoung Lee,et al.  Recent advances in organic transistor printing processes. , 2013, ACS applied materials & interfaces.

[181]  B. Wiley,et al.  Ethylenediamine Promotes Cu Nanowire Growth by Inhibiting Oxidation of Cu(111). , 2017, Journal of the American Chemical Society.

[182]  Gaofeng Wang,et al.  Screen-printed flexible temperature sensor based on FG/CNT/PDMS composite with constant TCR , 2019, Journal of Materials Science: Materials in Electronics.

[183]  N. Sottos,et al.  Microcapsule induced toughening in a self-healing polymer composite , 2004 .

[184]  V. Subramanian,et al.  Scaling and Optimization of Gravure-Printed Silver Nanoparticle Lines for Printed Electronics , 2010, IEEE Transactions on Components and Packaging Technologies.

[185]  K. Novoselov,et al.  All Inkjet-Printed Graphene-Silver Composite Ink on Textiles for Highly Conductive Wearable Electronics Applications , 2019, Scientific Reports.

[186]  M. Chi,et al.  Facile Synthesis of Sub-20 nm Silver Nanowires through a Bromide-Mediated Polyol Method. , 2016, ACS nano.

[187]  J. Lewis,et al.  Wettability Contrast Gravure Printing , 2015, Advanced materials.

[188]  F. Krebs,et al.  Roll‐to‐Roll fabrication of large area functional organic materials , 2013 .

[189]  F. Mut,et al.  Association of Hemodynamic Characteristics and Cerebral Aneurysm Rupture , 2011, American Journal of Neuroradiology.

[190]  Dae Yu Kim,et al.  Hydrophobic Paper-Based SERS Sensor Using Gold Nanoparticles Arranged on Graphene Oxide Flakes , 2019, Sensors.

[191]  Younan Xia,et al.  Synthesis of silver nanostructures with controlled shapes and properties. , 2007, Accounts of chemical research.

[192]  Yong Zhu,et al.  Printing Conductive Nanomaterials for Flexible and Stretchable Electronics: A Review of Materials, Processes, and Applications , 2019, Advanced Materials Technologies.

[193]  Jingxia Wang,et al.  Inkjet printing controllable footprint lines by regulating the dynamic wettability of coalescing ink droplets. , 2014, ACS applied materials & interfaces.

[194]  Jin-Woo Han,et al.  Plasma jet printing of electronic materials on flexible and nonconformal objects. , 2014, ACS applied materials & interfaces.

[195]  Richard H. Friend,et al.  Lithography‐Free, Self‐Aligned Inkjet Printing with Sub‐Hundred‐Nanometer Resolution , 2005 .