Fourier transform based dynamic error modeling method for ultra-precision machine tool

In some industrial fields, the workpiece surface need to meet not only the demand of surface roughness, but the strict requirement of multi-scale frequency domain errors. Ultra-precision machine tool is the most important carrier for the ultra-precision machining of the parts, whose errors is the key factor to influence the multi-scale frequency domain errors of the machined surface. The volumetric error modeling is the important bridge to link the relationship between the machine error and machined surface error. However, the available error modeling method from the previous research is hard to use to analyze the relationship between the dynamic errors of the machine motion components and multi-scale frequency domain errors of the machined surface, which plays the important reference role in the design and accuracy improvement of the ultra-precision machine tool. In this paper, a fourier transform based dynamic error modeling method is presented, which is also on the theoretical basis of rigid body kinematics and homogeneous transformation matrix. A case study is carried out, which shows the proposed method can successfully realize the identical and regular numerical description of the machine dynamic errors and the volumetric errors. The proposed method has strong potential for the prediction of the frequency domain errors on the machined surface, extracting of the information of multi-scale frequency domain errors, and analysis of the relationship between the machine motion components and frequency domain errors of the machined surface.

[1]  Psang Dain Lin,et al.  Modeling and measurement of active parameters and workpiece home position of a multi-axis machine tool , 2008 .

[2]  C. Richard Liu,et al.  An analytical quadratic model for the geometric error of a machine tool , 1986 .

[3]  Weidong Zhu,et al.  Machine tool component error extraction and error compensation by incorporating statistical analysis , 2010 .

[4]  Placid Mathew Ferreira,et al.  Mapping the effects of positioning errors on the volumetric accuracy of five-axis CNC machine tools , 1993 .

[5]  Kornel Ehmann,et al.  Study on the direct relation between machine error and machined form accuracy , 2013 .

[6]  Jenq-Shyong Chen,et al.  Real-time compensation of time-variant volumetric error on a machining center. , 1993 .

[7]  Mark A. Henesian,et al.  National Ignition Facility wavefront requirements and optical architecture , 2004 .

[8]  Tao Wang,et al.  Dynamic design approach of an ultra-precision machine tool used for optical parts machining , 2012 .

[9]  V. B. Kreng,et al.  A kinematic model for machine tool accuracy characterisation , 1994 .

[10]  Wanqun Chen,et al.  Analysis of Volumetric Error of Machine Tool Based on Monte Carlo Method , 2013 .

[11]  J. Jung,et al.  Machining accuracy enhancement by compensating for volumetric errors of a machine tool and on-machine measurement , 2006 .

[12]  Dong-Woo Cho,et al.  An analysis of the volumetric error uncertainty of a three-axis machine tool by beta distribution , 2000 .

[13]  Wanqun Chen,et al.  Volumetric error modeling and sensitivity analysis for designing a five-axis ultra-precision machine tool , 2013 .

[14]  Michael J. Runkel,et al.  NIF optical materials and fabrication technologies: an overview , 2004, SPIE LASE.

[15]  M. A. Donmez,et al.  A general methodology for machine tool accuracy enhancement by error compensation , 1986 .