Organomontmorillonite-modified soybean oil-based polyurethane/epoxy resin interpenetrating polymer networks (IPNs)

[1]  Yifan Sun,et al.  Organic montmorillonite reinforced epoxy mortar binders , 2016 .

[2]  Yifan Sun,et al.  Carbon nanofibers reinforced soy polyol-based polyurethane nanocomposites , 2016, Journal of Thermal Analysis and Calorimetry.

[3]  Yifan Sun,et al.  Performance of hot mix epoxy asphalt binder and its concrete , 2015 .

[4]  Yifan Sun,et al.  Brucite modified epoxy mortar binders: Flame retardancy, thermal and mechanical characterization , 2015 .

[5]  H. Tan,et al.  Preparation and properties of polyurethane‐modified epoxy cured in different simulated gravity environments , 2015 .

[6]  R. Kumar,et al.  Engineered elastomeric bio-nanocomposites from linseed oil/organoclay tailored for vibration damping , 2014 .

[7]  Yifan Sun,et al.  Flame retardancy, thermal, and mechanical properties of mixed flame retardant modified epoxy asphalt binders , 2014 .

[8]  Y. Qin,et al.  Castor Oil-Based Polyurethane/Epoxy Intercross-linked Polymer Network Adhesives for Metal Substrates , 2014 .

[9]  Sabu Thomas,et al.  Micro- and Nanostructured Epoxy/Rubber Blends: Schramm/Micro- and Nanostructured Epoxy/Rubber Blends , 2014 .

[10]  Saurabh Chaudhary,et al.  Graft‐interpenetrating polymer networks of epoxy with polyurethanes derived from poly(ethyleneterephthalate) waste , 2014 .

[11]  Yuting Wang,et al.  Effects of amino‐functionalized carbon nanotubes on the properties of amine‐terminated butadiene–acrylonitrile rubber‐toughened epoxy resins , 2014 .

[12]  Qisheng Wu,et al.  Soy polyol-based polyurethane modified by raw and silylated palygorskite , 2014 .

[13]  Yifan Sun,et al.  Thermal, mechanical, and morphological properties of soybean oil-based polyurethane/epoxy resin interpenetrating polymer networks (IPNs) , 2014, Journal of Thermal Analysis and Calorimetry.

[14]  Yifan Sun,et al.  Thermal, damping, and mechanical properties of thermosetting epoxy-modified asphalts , 2014, Journal of Thermal Analysis and Calorimetry.

[15]  S. N. Jaisankar,et al.  Effect of new hyperbranched polyester of varying generations on toughening of epoxy resin through interpenetrating polymer networks using urethane linkages , 2013 .

[16]  Yuting Wang,et al.  Natural fibrous nanoclay reinforced soy polyol-based polyurethane , 2012 .

[17]  Shoubing Chen,et al.  Damping, thermal, and mechanical properties of carbon nanotubes modified castor oil-based polyurethane/epoxy interpenetrating polymer network composites , 2012 .

[18]  M. Lavorgna,et al.  Epoxy/Polyurethane/Clay Ternary Nanocomposites – Effect of Components Mixing Sequence on the Composites Properties , 2012 .

[19]  N. Karak.  Vegetable oil-based polymers , 2012 .

[20]  H. Yin,et al.  Carboxyl-terminated butadiene-acrylonitrile-toughened epoxy/carboxyl-modified carbon nanotube nanocomposites: Thermal and mechanical properties , 2012 .

[21]  B. Hausnerova,et al.  Preparation and characterization of an epoxy resin modified by a combination of MDI-based polyurethane and montmorillonite , 2011 .

[22]  Chengshuang Wang,et al.  Effects of carbon nanotube diameter and functionality on the properties of soy polyol-based polyurethane , 2011 .

[23]  Qihua Wang,et al.  Damping, thermal, and mechanical properties of montmorillonite modified castor oil-based polyurethane/epoxy graft IPN composites , 2011 .

[24]  Ying Xia,et al.  Recent advances in vegetable oil-based polyurethanes. , 2011, ChemSusChem.

[25]  B. Hausnerova,et al.  Preparation and property evaluation of nanocomposites based on polyurethane‐modified epoxy/montmorillonite systems , 2010 .

[26]  C. Leu,et al.  Synthesis and properties of organosoluble polyimides derived from 2,2′‐dibromo‐ and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianilines , 2010 .

[27]  Shousheng Yang,et al.  A novel intumescent flame‐retardant epoxy resins system , 2010 .

[28]  王齐华,et al.  Dynamic mechanical properties of castor oil-based polyurethane/epoxy graft interpenetrating polymer network composites , 2010 .

[29]  Chengshuang Wang,et al.  Synthesis and Characterization of the Different Soy-Based Polyols by Ring Opening of Epoxidized Soybean Oil with Methanol, 1,2-Ethanediol and 1,2-Propanediol , 2009 .

[30]  S. Shan,et al.  Tribological performance and thermal behavior of epoxy resin nanocomposites containing polyurethane and organoclay , 2008 .

[31]  Krzysztof Pielichowski,et al.  Polymer/montmorillonite nanocomposites with improved thermal properties Part I. Factors influencing thermal stability and mechanisms of thermal stability improvement , 2007 .

[32]  D. J. Hourston,et al.  Damping characteristics and mechanical properties of silica filled PUR/PEMA simultaneous interpenetrating polymer networks , 2006 .

[33]  R. Shen,et al.  Synthesis, characterization and properties of organoclay‐modified polyurethane/epoxy interpenetrating polymer network nanocomposites , 2006 .

[34]  Jinbo Li.  High performance epoxy resin nanocomposites containing both organic montmorillonite and castor oil-polyurethane , 2006 .

[35]  L. Sperling.  Interpenetrating Polymer Networks , 2004 .

[36]  I. Daniel,et al.  Processing of clay/epoxy nanocomposites by shear mixing , 2003 .

[37]  P. Dubois,et al.  Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials , 2000 .

[38]  F. Hua,et al.  Interpenetrating polymer networks of epoxy resin and urethane acrylate resin. 2. Morphology and mechanical property , 2000 .

[39]  E. Giannelis,et al.  Polymer-silicate nanocomposites : Model systems for confined polymers and polymer brushes , 1999 .

[40]  Toshio Kurauchi,et al.  Synthesis of nylon 6-clay hybrid , 1993 .

[41]  K. Hsieh,et al.  Graft interpenetrating polymer networks of polyurethane and epoxy. II, Toughening mechanism , 1990 .