An efficient integration strategy for a SOFC-GT-SORC combined system with performance simulation and parametric optimization

Abstract The present study aims to establish an integrated modelling and optimization framework for a combined power system comprising fuel cell, gas turbine and Organic Rankine Cycle (ORC). The method is based upon the coupling of a syngas fueled solid oxide fuel cell-gas turbine (SOFC-GT) hybrid model and a bottoming supercritical ORC model developed using gPROMS to efficiently determine the range of appropriate operating conditions. A comprehensive and detailed analysis is carried out to simulate system behavior and to investigate the influence of key design and operating parameters on the system performance. The fuel flowrate and operating temperature of fuel cell, the pressure ratios of turbines, together with the flow split ratio of the ORC cycle are all set to be controllable variables. The results indicate that an electrical efficiency of 66.27% and a CHP efficiency of 88.43% are achievable for the integrated system. The analysis enables us to identify the system design tradeoffs, and therefore to determine optimal integration strategies for complex polygeneration systems.

[1]  Alan S. Fung,et al.  Performance analysis of hybrid solid oxide fuel cell and gas turbine cycle: Application of alternative fuels , 2013 .

[2]  Timo Kivisaari,et al.  Conceptual study of a 250 kW planar SOFC system for CHP application , 2004 .

[3]  Xiongwen Zhang,et al.  A review of integration strategies for solid oxide fuel cells , 2010 .

[4]  Chris L. Ward,et al.  Performance of a combined organic Rankine cycle and vapor compression cycle for heat activated cooli , 2011 .

[5]  He Weifeng,et al.  Experimental study on Organic Rankine cycle for low grade thermal energy recovery. , 2016 .

[6]  Sotirios Karellas,et al.  Integrated thermoeconomic optimization of standard and regenerative ORC for different heat source types and capacities , 2017 .

[7]  Tong Seop Kim,et al.  Comparison between pressurized design and ambient pressure design of hybrid solid oxide fuel cell–gas turbine systems , 2006 .

[8]  Yingru Zhao,et al.  Optimal design and operation of a syngas-fuelled SOFC micro-CHP system for residential applications in different climate zones in China , 2014 .

[9]  Masood Ebrahimi,et al.  Combined solid oxide fuel cell, micro-gas turbine and organic Rankine cycle for power generation (SOFC–MGT–ORC) , 2016 .

[10]  Masoud Rokni,et al.  Thermodynamic Performance Study of Biomass Gasification, Solid Oxide Fuel Cell and Micro Gas Turbine Hybrid Systems , 2010 .

[11]  Ibrahim Dincer,et al.  Thermodynamic Analysis of an Integrated SOFC, Solar ORC and Absorption Chiller for Tri‐generation Applications , 2013 .

[12]  H. Ho,et al.  Multi-level modeling of SOFC–gas turbine hybrid system , 2003 .

[13]  Ruzhu Wang,et al.  Simulation and experiments on an ORC system with different scroll expanders based on energy and exergy analysis , 2015 .

[14]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[15]  Fabian Mueller,et al.  Dynamic Simulation of an Integrated Solid Oxide Fuel Cell System Including Current-Based Fuel Flow Control , 2005 .

[16]  Diamantis P. Bakalis,et al.  Full and part load exergetic analysis of a hybrid micro gas turbine fuel cell system based on existing components , 2012 .

[17]  James D. Maclay,et al.  Parametric Thermodynamic Analysis of a Solid Oxide Fuel Cell Gas Turbine System Design Space , 2010 .

[18]  Ali Volkan Akkaya,et al.  A study on performance of solid oxide fuel cell‐organic Rankine cycle combined system , 2009 .

[19]  Yunting Ge,et al.  Experimental investigations into power generation with low grade waste heat and R245fa Organic Rankine cycles (ORCs) , 2017 .

[20]  G. Naterer,et al.  Thermodynamic modeling of a gas turbine cycle combined with a solid oxide fuel cell , 2008 .

[21]  Minggao Ouyang,et al.  Study of working fluid selection of organic Rankine cycle (ORC) for engine waste heat recovery , 2011 .

[22]  Feridun Hamdullahpur,et al.  Exergy analysis of an integrated solid oxide fuel cell and organic Rankine cycle for cooling, heating and power production , 2010 .

[23]  I. Dincer,et al.  Thermodynamic modeling of direct internal reforming solid oxide fuel cells operating with syngas , 2007 .

[24]  Emmanuel Kakaras,et al.  Detailed transient thermal simulation of a planar SOFC (solid oxide fuel cell) using gPROMS , 2015 .

[25]  Nigel P. Brandon,et al.  Comparison between two optimization strategies for solid oxide fuel cell–gas turbine hybrid cycles , 2011 .

[26]  F. Calise,et al.  Design and partial load exergy analysis of hybrid SOFC–GT power plant , 2006 .

[27]  Jiangfeng Wang,et al.  Thermodynamic analysis of an SOFC–GT–ORC integrated power system with liquefied natural gas as heat sink , 2013 .

[28]  Seok Hun Kang,et al.  Design and experimental study of ORC (organic Rankine cycle) and radial turbine using R245fa working fluid , 2012 .

[29]  F. Hamdullahpur,et al.  Performance Evaluation of Different Configurations of Biogas-Fuelled SOFC Micro-CHP Systems for Residential Applications , 2010 .

[30]  Petronilla Fragiacomo,et al.  Energy analysis of an SOFC system fed by syngas , 2015 .

[31]  Kyriakos D. Panopoulos,et al.  Integrated CHP with autothermal biomass gasification and SOFC–MGT , 2008 .

[32]  J. Sadhukhan,et al.  Energy Integration and Analysis of Solid Oxide Fuel Cell Based Microcombined Heat and Power Systems and Other Renewable Systems Using Biomass Waste Derived Syngas , 2010 .

[33]  I. Dincer,et al.  Energy analysis of a trigeneration plant based on solid oxide fuel cell and organic Rankine cycle , 2010 .

[34]  Pranjal Sarmah,et al.  Energy and exergy based performance analyses of a solid oxide fuel cell integrated combined cycle power plant , 2014 .

[35]  Fabian Mueller,et al.  Design, Simulation and Control of a 100 MW-Class Solid Oxide Fuel Cell Gas Turbine Hybrid System , 2008 .

[36]  Rory A. Roberts,et al.  Dynamic Simulation of a Pressurized 220kW Solid Oxide Fuel-Cell–Gas-Turbine Hybrid System: Modeled Performance Compared to Measured Results , 2006 .

[37]  Nigel P. Brandon,et al.  The Development and Application of a Novel Optimisation Strategy for Solid Oxide Fuel Cell‐Gas Turbine Hybrid Cycles , 2009 .

[38]  Rory A. Roberts,et al.  Control Design for a Bottoming Solid Oxide Fuel Cell Gas Turbine Hybrid System , 2006 .

[39]  Zhen Lu,et al.  Performance analysis and optimization of organic Rankine cycle (ORC) for waste heat recovery , 2007 .

[40]  Nigel P. Brandon,et al.  Optimal integration strategies for a syngas fuelled SOFC and gas turbine hybrid , 2011 .

[41]  Li Zhao,et al.  A review of working fluid and expander selections for organic Rankine cycle , 2013 .

[42]  H. Ho,et al.  Modelling of simple hybrid solid oxide fuel cell and gas turbine power plant , 2002 .

[43]  S. Chan,et al.  Energy and exergy analysis of simple solid-oxide fuel-cell power systems , 2002 .

[44]  J. Sadhukhan,et al.  Performance analysis of integrated biomass gasification fuel cell (BGFC) and biomass gasification combined cycle (BGCC) systems , 2010 .

[45]  Fabian Mueller,et al.  Synergistic integration of a gas turbine and solid oxide fuel cell for improved transient capability , 2008 .

[46]  Yoshitaka Inui,et al.  High performance SOFC/GT combined power generation system with CO2 recovery by oxygen combustion method , 2005 .

[47]  Lisa Branchini,et al.  ORC waste heat recovery in European energy intensive industries: Energy and GHG savings , 2013 .

[48]  Dongxiang Wang,et al.  Efficiency and optimal performance evaluation of organic Rankine cycle for low grade waste heat power generation , 2013 .

[49]  Vittorio Verda,et al.  Development of a Detailed Planar Solid Oxide Fuel Cell Computational Fluid Dynamics Model for Analyzing Cell Performance Degradation , 2009 .

[50]  V. Zare,et al.  A comparative thermodynamic investigation with environmental analysis of SOFC waste heat to power conversion employing Kalina and Organic Rankine Cycles , 2016 .