Development of numerical model for ballistic resistance evaluation of combat helmet and experimental validation

Abstract Modern designing process of combat helmets requires both numerical modeling and experimental validation in order to achieve exigent requirements combining impact resistance and reasonable weight. In this work a finite element model of a combat helmet is presented. Mechanical behaviour of the shell aramid composite under impact conditions was analyzed from experimental Fragment Simulating Projectile (FSP) and Full-Metal Jacketed (FMJ) impact tests on aramid flat plates. Numerical modeling based on finite elements method was used to simulate both impacts in simple plates of the composite and also the simulation of ballistic impact involving real ammunition and the complex geometry of the helmet including inner foam. Experimental work involving impact tests on composite plates and also ballistic test on the helmet with a dummy provided real data for comparison with models predictions and proved the accuracy of the numerical models developed.

[1]  D. Cronin,et al.  Head and brain response to blast using sagittal and transverse finite element models , 2014, International journal for numerical methods in biomedical engineering.

[2]  E. Lavernia,et al.  Thermal residual stresses in metal matrix composites: A review , 1995 .

[3]  D. Agard,et al.  Microtubule nucleation by γ-tubulin complexes , 2011, Nature Reviews Molecular Cell Biology.

[4]  Dixie Hisley,et al.  Experimental Methodology Using Digital Image Correlation to Assess Ballistic Helmet Blunt Trauma , 2011 .

[5]  Long Bin Tan,et al.  Performance of an advanced combat helmet with different interior cushioning systems in ballistic impact: Experiments and finite element simulations , 2012 .

[6]  Tuğrul Özel,et al.  Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining , 2007 .

[7]  Z. Hashin.  Failure Criteria for Unidirectional Fiber Composites , 1980 .

[8]  Mehmet Çolakoğlu,et al.  Experimental and Numerical Investigations on the Ballistic Performance of Polymer Matrix Composites Used in Armor Design , 2007 .

[9]  Praveen K. Pinnoji,et al.  Analysis of impact-induced damage and delamination in the composite shell of a helmet , 2010 .

[10]  Brian M. Boggess,et al.  Injuries of the Head from Backface Deformation of Ballistic Protective Helmets Under Ballistic Impact , 2015, Journal of forensic sciences.

[11]  C. Hernandez,et al.  Dynamic characterization of Roma Plastilina No. 1 from Drop Test and inverse analysis , 2015 .

[12]  A. Rafie,et al.  High velocity impact response of Kevlar-29/epoxy and 6061-T6 aluminum laminated panels , 2013 .

[13]  Svein Kleiven,et al.  Evaluation of head response to ballistic helmet impacts using the finite element method , 2007 .

[14]  Vinu Unnikrishnan,et al.  Energy dissipation of nanocomposite based helmets for blast-induced traumatic brain injury mitigation , 2015 .

[15]  Chun Lu,et al.  Computational simulation of the human head response to non-contact impact , 2008 .

[16]  H P Lee,et al.  Finite element analysis for the evaluation of protective functions of helmets against ballistic impact , 2010, Computer methods in biomechanics and biomedical engineering.

[17]  B. S. Butola,et al.  An analysis of deformation and energy absorption modes of shear thickening fluid treated Kevlar fabrics as soft body armour materials , 2013 .

[18]  Norberto Feito,et al.  A method for inter-yarn friction coefficient calculation for plain wave of aramid fibers , 2016 .

[19]  C. Soderstrom,et al.  A New Nonpenetrating Ballistic Injury , 1978, Annals of surgery.

[20]  W. C. Bell,et al.  Blast-wave impact-mitigation capability of polyurea when used as helmet suspension-pad material , 2010 .

[21]  Hasan Sofuoglu,et al.  Flow behavior of Plasticine used in physical modeling of metal forming processes , 2000 .

[22]  C. Y. Tham,et al.  Ballistic impact of a KEVLAR® helmet: Experiment and simulations , 2008 .

[23]  Y. Li,et al.  Modeling of Advanced Combat Helmet Under Ballistic Impact , 2015 .

[24]  K. Tse,et al.  Impact of complex blast waves on the human head: a computational study , 2014, International journal for numerical methods in biomedical engineering.

[25]  H. Miguélez,et al.  Numerical analysis of the ballistic behaviour of Kevlar® composite under impact of double-nosed stepped cylindrical projectiles , 2016 .

[26]  J. Sarron,et al.  Consequences of nonpenetrating projectile impact on a protected head: study of rear effects of protections. , 2000, The Journal of trauma.