A two-dimensional mathematical model for vanadium redox flow battery stacks incorporating nonuniform electrolyte distribution in the flow frame

Abstract Lumped models have been widely adopted to predict the performance of the vanadium redox flow battery (VFRB) stack, which mainly due to its simplicity in modeling transient behaviors during operation cycles. However, average transport and electrochemical properties in previous lumped models make it impossible to obtain the information of electrolyte distributions in stacks. To address this issue, in this work, we report a two-dimensional mathematical model for a VRFB stack considering the effect of nonuniform electrolyte distributions in the flow frame via a flow network equivalence method. With this new model, battery performance and its temperature at different operating conditions are determined accurately. It is demonstrated that (i) temperature fluctuations of the stack reach up to 10 K at different current densities and flow rates; (ii) 25% blockage in the middle cell can lead to the capacity reduction by up to 80%.

[1]  Takashi Hikihara,et al.  A Coupled Dynamical Model of Redox Flow Battery Based on Chemical Reaction, Fluid Flow, and Electrical Circuit , 2008, IEICE Trans. Fundam. Electron. Commun. Comput. Sci..

[2]  Zhongbao Wei,et al.  Real-time monitoring of capacity loss for vanadium redox flow battery , 2018, Journal of Power Sources.

[3]  Xuelong Zhou,et al.  Critical transport issues for improving the performance of aqueous redox flow batteries , 2017 .

[4]  B. Bai,et al.  An improved model of ion selective adsorption in membrane and its application in vanadium redox flow batteries , 2018 .

[5]  Binyu Xiong,et al.  Dynamic thermal-hydraulic modeling and stack flow pattern analysis for all-vanadium redox flow battery , 2014 .

[6]  Emin Caglan Kumbur,et al.  Open circuit voltage of vanadium redox flow batteries: Discrepancy between models and experiments , 2011 .

[7]  Arvind R. Kalidindi,et al.  A Transient Vanadium Flow Battery Model Incorporating Vanadium Crossover and Water Transport through the Membrane , 2012 .

[8]  Maria Skyllas-Kazacos,et al.  Online state of charge and model parameter co-estimation based on a novel multi-timescale estimator for vanadium redox flow battery , 2016 .

[9]  Qiang Ye,et al.  Effects of the electric field on ion crossover in vanadium redox flow batteries , 2015 .

[10]  Bofeng Bai,et al.  A transient electrochemical model incorporating the Donnan effect for all-vanadium redox flow batteries , 2015 .

[11]  Alasdair J. Crawford,et al.  1 kW/1 kWh advanced vanadium redox flow battery utilizing mixed acid electrolytes , 2013 .

[12]  J. Bao,et al.  Studies on pressure losses and flow rate optimization in vanadium redox flow battery , 2014 .

[13]  S. König,et al.  A plug flow reactor model of a vanadium redox flow battery considering the conductive current collectors , 2017 .

[14]  Maria Skyllas-Kazacos,et al.  State-of-Charge Monitoring and Electrolyte Rebalancing Methods for the Vanadium Redox Flow Battery , 2012 .

[15]  Qian Xu,et al.  Numerical investigations of flow field designs for vanadium redox flow batteries , 2013 .

[16]  M. M. Tomadakis,et al.  Viscous Permeability of Random Fiber Structures: Comparison of Electrical and Diffusional Estimates with Experimental and Analytical Results , 2005 .

[17]  T. Zhao,et al.  A vanadium redox flow battery model incorporating the effect of ion concentrations on ion mobility , 2015 .

[18]  J. Bao,et al.  Modelling and simulation of thermal behaviour of vanadium redox flow battery , 2016 .

[19]  Frank C. Walsh,et al.  Non-isothermal modelling of the all-vanadium redox flow battery , 2009 .

[20]  Guiling Ning,et al.  A three-dimensional model for thermal analysis in a vanadium flow battery , 2014 .

[21]  G. Graff,et al.  A Stable Vanadium Redox‐Flow Battery with High Energy Density for Large‐Scale Energy Storage , 2011 .

[22]  Maria Skyllas-Kazacos,et al.  Water transfer behaviour across cation exchange membranes in the vanadium redox battery , 2003 .

[23]  Chenxi Sun,et al.  Investigations on transfer of water and vanadium ions across Nafion membrane in an operating vanadium redox flow battery , 2010 .

[24]  Frank C. Walsh,et al.  A dynamic performance model for redox-flow batteries involving soluble species , 2008 .

[25]  Michael Suriyah,et al.  Model based examination on influence of stack series connection and pipe diameters on efficiency of vanadium redox flow batteries under consideration of shunt currents , 2015 .

[26]  Dongjiang You,et al.  A simple model for the vanadium redox battery , 2009 .

[27]  D. Schmal,et al.  Mass transfer at carbon fibre electrodes , 1986 .

[28]  K. Bromberger,et al.  A Model for All‐Vanadium Redox Flow Batteries: Introducing Electrode‐Compression Effects on Voltage Losses and Hydraulics , 2014 .

[29]  Maria Skyllas-Kazacos,et al.  Adaptive estimation of state of charge and capacity with online identified battery model for vanadium redox flow battery , 2016 .