High performance anion exchange membranes obtained through graft architecture and rational cross-linking

[1]  K. Sanui,et al.  Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers , 2000 .

[2]  Michael D. Guiver,et al.  Proton conducting membranes based on cross-linked sulfonated poly(ether ether ketone) (SPEEK) , 2004 .

[3]  R. Slade,et al.  Prospects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel Cells , 2005 .

[4]  T. Xu.  Ion exchange membranes: State of their development and perspective , 2005 .

[5]  R. Slade,et al.  Poly(ethylene-co-tetrafluoroethylene)-Derived Radiation-Grafted Anion-Exchange Membrane with Properties Specifically Tailored for Application in Metal-Cation-Free Alkaline Polymer Electrolyte Fuel Cells , 2007 .

[6]  Chong Zhang,et al.  A new and facile approach for the preparation of cross-linked sulfonated poly(sulfide sulfone) membranes for fuel cell application , 2007 .

[7]  Robert C T Slade,et al.  A carbon dioxide tolerant aqueous-electrolyte-free anion-exchange membrane alkaline fuel cell. , 2008, ChemSusChem.

[8]  Chunmei Wang,et al.  Synthesis and Characterization of Poly(vinylidene fluoride)-g-sulfonated Polystyrene Graft Copolymers for Proton Exchange Membrane , 2008 .

[9]  K. Miyatake,et al.  Synthesis and properties of sulfonated block copolymers having fluorenyl groups for fuel-cell applications. , 2009, ACS applied materials & interfaces.

[10]  Cy H. Fujimoto,et al.  Synthesis and Characterization of Poly(phenylene)-Based Anion Exchange Membranes for Alkaline Fuel Cells , 2009 .

[11]  Y. Kim,et al.  Optimizing end-group cross-linking polymer electrolytes for fuel cell applications , 2010 .

[12]  Paul F. Mutolo,et al.  A ring-opening metathesis polymerization route to alkaline anion exchange membranes: development of hydroxide-conducting thin films from an ammonium-functionalized monomer. , 2009, Journal of the American Chemical Society.

[13]  Jing Pan,et al.  Self-crosslinked alkaline polymer electrolyte exceptionally stable at 90 °C. , 2010, Chemical communications.

[14]  Kyle N. Grew,et al.  A Dusty Fluid Model for Predicting Hydroxyl Anion Conductivity in Alkaline Anion Exchange Membranes , 2010 .

[15]  M. Koike,et al.  Anion Conductive Aromatic Ionomers Containing Fluorenyl Groups , 2010 .

[16]  Timothy J. Peckham,et al.  Structure‐Morphology‐Property Relationships of Non‐Perfluorinated Proton‐Conducting Membranes , 2010, Advanced materials.

[17]  Jing Pan,et al.  High‐Performance Alkaline Polymer Electrolyte for Fuel Cell Applications , 2010 .

[18]  H. Na,et al.  Novel self-crosslinked poly(aryl ether sulfone) for high alkaline stable and fuel resistant alkaline anion exchange membranes. , 2011, Chemical communications.

[19]  T. Fujigaya,et al.  Very High Performance Alkali Anion‐Exchange Membrane Fuel Cells , 2011 .

[20]  H. Na,et al.  Cross-linked membranes with a macromolecular cross-linker for direct methanol fuel cells , 2011 .

[21]  K. Scott,et al.  Preparation of alkaline anion exchange polymer membrane from methylated melamine grafted poly(vinylbenzyl chloride) and its fuel cell performance , 2011 .

[22]  Dc Kitty Nijmeijer,et al.  Anion exchange membranes for alkaline fuel cells: A review , 2011 .

[23]  J. Kallitsis,et al.  Cross-Linking of Side Chain Unsaturated Aromatic Polyethers for High Temperature Polymer Electrolyte Membrane Fuel Cell Applications , 2011 .

[24]  Xiaocheng Lin,et al.  Synthesis of soluble copolymers bearing ionic graft for alkaline anion exchange membrane , 2012 .

[25]  Hongwei Zhang,et al.  Advances in the high performance polymer electrolyte membranes for fuel cells. , 2012, Chemical Society reviews.

[26]  M. Hickner,et al.  Degradation of imidazolium- and quaternary ammonium-functionalized poly(fluorenyl ether ketone sulfone) anion exchange membranes. , 2012, ACS applied materials & interfaces.

[27]  A. Zhu,et al.  Self-crosslinked anion exchange membranes by bromination of benzylmethyl-containing poly(sulfone)s for direct methanol fuel cells , 2012 .

[28]  H. Na,et al.  Cross-linked hydroxide conductive membranes with side chains for direct methanol fuel cell applications , 2012 .

[29]  Young-Jea Kim,et al.  Fluorinated Aromatic Polyether Ionomers Containing Perfluorocyclobutyl as Cross-Link Groups for Fuel Cell Applications , 2012 .

[30]  Nanwen Li,et al.  Highly stable, anion conductive, comb-shaped copolymers for alkaline fuel cells. , 2013, Journal of the American Chemical Society.

[31]  Liang Wu,et al.  Enhancement of hydroxide conduction by self-assembly in anion conductive comb-shaped copolymers , 2013 .

[32]  Yan-Jie Wang,et al.  Alkaline polymer electrolyte membranes for fuel cell applications. , 2013, Chemical Society reviews.