Study of Air Flow Interaction with Pilot Injections in a Diesel Engine by Means of PIV Measurements

The support of the Spanish Ministry of Economy and Competitiveness (TRA2014-58870-R,) is greatly acknowledged through HiReCo project.

[1]  Luigi Allocca,et al.  PIV Investigation of High Swirl Flow on Spray Structure and its Effect on Emissions in a Diesel-Like Environment , 2011 .

[2]  Octavio Armas,et al.  Influence of measurement errors and estimated parameters on combustion diagnosis , 2006 .

[3]  Francisco José Arnau,et al.  A Simple Model for Predicting the Trapped Mass in a DI Diesel Engine , 2007 .

[4]  Henrik Dembinski,et al.  The effects of injection pressure and swirl on in-cylinder flow pattern and combustion in a compression–ignition engine , 2014 .

[5]  Hans-Erik Ångström,et al.  Swirl and Injection Pressure Impact on After-Oxidation in Diesel Combustion, Examined with Simultaneous Combustion Image Velocimetry and Two Colour Optical Method , 2013 .

[6]  O. Armas,et al.  Diagnosis of DI Diesel combustion from in-cylinder pressure signal by estimation of mean thermodynamic properties of the gas , 1999 .

[7]  Fred W. Bowditch,et al.  A New Tool for Combustion Research A Quartz Piston Engine , 1961 .

[8]  Antonio García,et al.  Sensitivity of combustion noise and NOx and soot emissions to pilot injection in PCCI Diesel engines , 2013 .

[9]  Hiroshi Sono,et al.  PCCI Operation with Early Injection of Conventional Diesel Fuel , 2005 .

[10]  W. Schröder,et al.  Cycle resolved multi-planar flow measurements in a four-valve combustion engine , 2011 .

[11]  X. Margot,et al.  Computational Study of Heat Transfer to the Walls of a DI Diesel Engine , 2005 .

[12]  Jaime Martín,et al.  A new methodology for uncertainties characterization in combustion diagnosis and thermodynamic modelling , 2014 .

[13]  B. Johansson,et al.  Analysis of Errors in Heat Release Calculations Due to Distortion of the In-Cylinder Volume Trace from Mechanical Deformation in Optical Diesel Engines , 2012 .

[14]  H. Hiroyasu,et al.  Swirl Measurements and Modeling in Direct Injection Diesel Engines , 1988 .

[15]  R. Kiplimo,et al.  Effects of spray impingement, injection parameters, and EGR on the combustion and emission characteristics of a PCCI diesel engine , 2012 .

[16]  Gary D. Neely,et al.  Experimental investigation of PCCI-DI combustion on emissions in a light-duty diesel engine , 2004 .

[17]  Paul C. Miles,et al.  Characterization of Flow Asymmetry During the Compression Stroke Using Swirl-Plane PIV in a Light-Duty Optical Diesel Engine with the Re-entrant Piston Bowl Geometry , 2015 .

[18]  Pablo Olmeda,et al.  A complete 0D thermodynamic predictive model for direct injection diesel engines , 2011 .

[19]  John Foss,et al.  Springer Handbook of Experimental Fluid Mechanics , 2007 .

[20]  José V. Pastor,et al.  LDV measurements of the flow inside the combustion chamber of a 4-valve D.I. diesel engine with axisymmetric piston-bowls , 1996 .

[21]  C. Luijten,et al.  Pre- and post-injection flow characterization in a heavy-duty diesel engine using high-speed PIV , 2012 .

[22]  Bengt Johansson,et al.  Effects of Injection Strategies on Fluid Flow and Turbulence in Partially Premixed Combustion (PPC) in a Light Duty Engine , 2015 .

[23]  Franz Chmela,et al.  Advanced Heat Transfer Model for CI Engines , 2005 .