DNN-Based ADNMPC of an Industrial Pickling Cold-Rolled Titanium Process via Field Enhancement Heat Exchange

The dynamic neural network based adaptive direct nonlinear model predictive control is designed to control an industrial microwave heating pickling cold-rolled titanium process. The identifier of the direct adaptive nonlinear model identification and the controller of the adaptive nonlinear model predictive control are designed based on series-parallel dynamic neural network training by RLS algorithm with variable incremental factor, gain, and forgetting factor. These identifier and controller are used to constitute intelligent controller for adjusting the temperature of microwave heating acid. The correctness of the controller structure, the convergence, and feasibility of the control algorithms is tested by system simulation. For a given point tracking, model mismatch simulation results show that the controller can be implemented on the system to track and overcome the mismatch system model. The control model can be achieved to track on pickling solution concentration and temperature of a given reference and overcome the disturbance.

[1]  Andreas Antoniou,et al.  Practical Optimization: Algorithms and Engineering Applications , 2007, Texts in Computer Science.

[2]  Jagannathan Sarangapani,et al.  Neural Network Control of Uncertain Nonlinear Discrete-Time Systems with Actuator Nonlinearities , 2006, Neural Network Control of Nonlinear Discrete-Time Systems.

[3]  Tao He,et al.  Acid-pickling plates and strips speed control system by microwave heating based on self-adaptive fuzzy PID algorithm , 2012 .

[4]  Jianyin Zhang,et al.  Minimizing the creation of spent pickling liquors in a pickling process with high-concentration hydrochloric acid solutions: mechanism and evaluation method. , 2012, Journal of environmental management.

[5]  W. Marsden.  I and J , 2012 .

[6]  Li Wei,et al.  Microwave energy heating process for cycling fluid medium based on APSO-PID control strategy , 2012 .

[7]  Vincent A Akpan,et al.  Nonlinear model identification and adaptive model predictive control using neural networks. , 2011, ISA transactions.

[8]  Mike Wing,et al.  The making of , 2010, SOEN.

[9]  Magdalena Regel-Rosocka,et al.  A review on methods of regeneration of spent pickling solutions from steel processing. , 2010, Journal of hazardous materials.

[10]  Raymond Chiong.  Intelligent Systems for Automated Learning and Adaptation: Emerging Trends and Applications , 2010, Intelligent Systems for Automated Learning and Adaptation.

[11]  K K Sahu,et al.  An overview of the recovery of acid from spent acidic solutions from steel and electroplating industries. , 2009, Journal of hazardous materials.

[12]  Mohd Azlan Hussain,et al.  Neural network based model predictive control for a steel pickling process , 2009 .

[13]  Wf Kladnig,et al.  New development of acid regeneration in steel pickling plants , 2008 .

[14]  Mustafa Türker,et al.  Dynamic Neural-Network-Based Model-Predictive Control of an Industrial Baker's Yeast Drying Process , 2008, IEEE Transactions on Neural Networks.

[15]  F. J. Alguacil,et al.  Rinse water regeneration in stainless steel pickling , 2007 .

[16]  K. P. Sandeep,et al.  Mathematical modeling of continuous flow microwave heating of liquids (effects of dielectric properties and design parameters) , 2007 .

[17]  Amornchai Arpornwichanop,et al.  Neural network inverse model-based controller for the control of a steel pickling process , 2005, Comput. Chem. Eng..

[18]  Björn Sohlberg,et al.  Hybrid grey box modelling of a pickling process , 2005 .

[19]  Jean-Pierre Celis,et al.  Mechanism of single and multiple step pickling of 304 stainless steel in acid electrolytes , 2005 .

[20]  Paisan Kittisupakorn,et al.  Integrated data reconciliation with generic model control for the steel pickling process , 2003 .

[21]  Shuzhi Sam Ge,et al.  Stable adaptive control and estimation for nonlinear systems - neural and fuzzy approximator techniques: J. T. Spooner, M. Maggiore, R. Ordóñez, K. M. Passino, John Wiley & Sons, Inc., New York, 2002, ISBN: 0-471-41546-4 , 2003, Autom..

[22]  Johan Grasman,et al.  Thermal runaway in microwave heating : a mathematical analysis , 2002 .

[23]  Jan M. Maciejowski,et al.  Predictive control : with constraints , 2002 .

[24]  YUEYuncan,et al.  Modified Recursive Least Squares Algorithm with Variable Parameters and Resetting for Time—Varying System , 2002 .

[25]  Michael J. Grimble,et al.  Predictive control for industrial applications , 2000, Annu. Rev. Control..

[26]  R. K. Shah,et al.  Opportunities for Heat Exchanger Applications in Environmental Systems , 2000 .

[27]  K. E. Haque,et al.  Microwave energy for mineral treatment processes—a brief review , 1999 .

[28]  M. Textor,et al.  Surface characterization , 1999 .

[29]  M. Textor,et al.  Surface characterization of implant materials c.p. Ti, Ti-6Al-7Nb and Ti-6Al-4V with different pretreatments. , 1999, Journal of materials science. Materials in medicine.

[30]  Michael A. Henson,et al.  Nonlinear model predictive control: current status and future directions , 1998 .

[31]  Richard D. Braatz,et al.  On the "Identification and control of dynamical systems using neural networks" , 1997, IEEE Trans. Neural Networks.

[32]  C. A. Vriezinga.  Thermal runaway and bistability in microwave heated isothermal slabs. , 1996 .

[33]  Kumpati S. Narendra,et al.  Identification and control of dynamical systems using neural networks , 1990, IEEE Trans. Neural Networks.

[34]  G. Goodwin,et al.  Modified least squares algorithm incorporating exponential resetting and forgetting , 1988 .

[35]  David W. Clarke,et al.  Generalized predictive control - Part I. The basic algorithm , 1987, Autom..

[36]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .