Effects of material and coefficient of friction on taper joint dental implants.

[1]  A. A. Del Bel Cury,et al.  The role of prosthetic abutment material on the stress distribution in a maxillary single implant-supported fixed prosthesis. , 2016, Materials science & engineering. C, Materials for biological applications.

[2]  S. Ha.  Biomechanical three-dimensional finite element analysis of monolithic zirconia crown with different cement type , 2015, The journal of advanced prosthodontics.

[3]  F. Geramipanah,et al.  Effect of increased crown height on stress distribution in short dental implant components and their surrounding bone: A finite element analysis. , 2015, The Journal of prosthetic dentistry.

[4]  F. Geramipanah,et al.  Dynamic nature of abutment screw retightening: finite element study of the effect of retightening on the settling effect. , 2015, The Journal of prosthetic dentistry.

[5]  M. Paknejad,et al.  Effect of the coefficient of friction and tightening speed on the preload induced at the dental implant complex with the finite element method. , 2015, The Journal of prosthetic dentistry.

[6]  Yasuhiro Tanimoto,et al.  A review of improved fixation methods for dental implants. Part II: biomechanical integrity at bone-implant interface. , 2015, Journal of prosthodontic research.

[7]  I. Cavalcanti,et al.  Biofilm and saliva affect the biomechanical behavior of dental implants. , 2014, Journal of biomechanics.

[8]  Jung-Bo Huh,et al.  Influence of abutment materials on the implant-abutment joint stability in internal conical connection type implant systems , 2014, The journal of advanced prosthodontics.

[9]  M. Abolbashari,et al.  Bone response from a dynamic stimulus on a one-piece and multi-piece implant abutment and crown by finite element analysis. , 2014, The Journal of oral implantology.

[10]  Martin Rücker,et al.  Influence of lubricant on screw preload and stresses in a finite element model for a dental implant. , 2014, The Journal of prosthetic dentistry.

[11]  S. Müftü,et al.  Experimental study of the removal force in tapered implant-abutment interfaces: a pilot study. , 2014, The Journal of prosthetic dentistry.

[12]  C. Hämmerle,et al.  Bending moments of zirconia and titanium implant abutments supporting all-ceramic crowns after aging. , 2014, Clinical oral implants research.

[13]  M. Swain,et al.  Fracture resistance of titanium and zirconia abutments: an in vitro study. , 2013, The Journal of prosthetic dentistry.

[14]  O. Komiyama,et al.  Evaluating the Dynamic Behavior of Taper Joint Implants Under Different Loading Conditions:A Transient Dynamic Finite Element Analysis , 2013 .

[15]  P. Coelho,et al.  Mechanical testing of thin-walled zirconia abutments , 2013, Journal of applied oral science : revista FOB.

[16]  S. L. Barbosa,et al.  Simultaneous degradation by corrosion and wear of titanium in artificial saliva containing fluorides , 2012 .

[17]  Hiok Chai Quek,et al.  Load fatigue performance of conical implant-abutment connections. , 2011, The International journal of oral & maxillofacial implants.

[18]  K. Rungcharassaeng,et al.  Retrieval of a fractured zirconia implant abutment using a modified crown and bridge remover: a clinical report. , 2011, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[19]  E. Romeo,et al.  Influence of abutment material on the gingival color of implant-supported all-ceramic restorations: a prospective multicenter study. , 2011, Clinical oral implants research.

[20]  M. Yoshinari,et al.  Wear behavior of tetragonal zirconia polycrystal versus titanium and titanium alloy , 2011, Biomedical materials.

[21]  P. Pospiech,et al.  Influence of artificial aging on the load-bearing capability of straight or angulated zirconia abutments in implant/tooth-supported fixed partial dentures. , 2010, The International journal of oral & maxillofacial implants.

[22]  Stuart J Froum,et al.  Prospective study of 94 platform-switched implants observed from 1992 to 2006. , 2010, The International journal of periodontics & restorative dentistry.

[23]  Moustafa N. Aboushelib,et al.  Zirconia implant abutment fracture: clinical case reports and precautions for use. , 2009, The International journal of prosthodontics.

[24]  R. Ribeiro,et al.  Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study. , 2009, Clinical oral implants research.

[25]  T. Guda,et al.  Probabilistic analysis of preload in the abutment screw of a dental implant complex. , 2008, The Journal of prosthetic dentistry.

[26]  M. Welander,et al.  The mucosal barrier at implant abutments of different materials. , 2008, Clinical oral implants research.

[27]  P. Manicone,et al.  An overview of zirconia ceramics: basic properties and clinical applications. , 2007, Journal of dentistry.

[28]  T. Hayakawa,et al.  Mode superposition transient dynamic analysis for dental implants with stress-absorbing elements: a finite element analysis. , 2006, Dental materials journal.

[29]  Richard J Lazzara,et al.  Platform switching: a new concept in implant dentistry for controlling postrestorative crestal bone levels. , 2006, The International journal of periodontics & restorative dentistry.

[30]  K. Nemoto,et al.  Influence of implant/abutment joint designs on abutment screw loosening in a dental implant system. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[31]  K. Nemoto,et al.  Influence of particle size of fillers on frictional wear of dental composite resins , 2004 .

[32]  Byungsik Kang,et al.  Finite element analysis to determine implant preload. , 2003, The Journal of prosthetic dentistry.

[33]  Kenneth G Boberick,et al.  Implant screw mechanics and the settling effect: overview. , 2003, The Journal of oral implantology.

[34]  Antonio Carrassi,et al.  Bacterial colonization of zirconia ceramic surfaces: an in vitro and in vivo study. , 2002, The International journal of oral & maxillofacial implants.

[35]  R L Sakaguchi,et al.  Elongation and preload stress in dental implant abutment screws. , 1995, The International journal of oral & maxillofacial implants.

[36]  R. G. Craig,et al.  Friction and Wear of Restorative Dental Materials , 1971, Journal of dental research.