Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier.

We investigate the average power scaling of two diode-pumped Yb-doped fiber amplifiers emitting a diffraction-limited beam. The first fiber under investigation with a core diameter of 30 µm was able to amplify a 10 W narrow linewidth seed laser up to 2.8 kW average output power before the onset of transverse mode instabilities (TMI). A further power scaling was achieved using a second fiber with a smaller core size (23µm), which allowed for a narrow linewidth output power of 3.5 kW limited by stimulated Brillouin scattering (SBS). We mitigated SBS using a spectral broadening mechanism, which allowed us to further increase the output power to 4.3 kW only limited by the available pump power. Up to this power level, a high slope efficiency of 90% with diffraction-limited beam quality and without any sign of TMI or stimulated Raman scattering for a spectral dynamic range of higher than -80 dB was obtained.

[1]  David N. Payne,et al.  Multi-kilowatt Single-mode Ytterbium-doped Large-core Fiber Laser , 2009 .

[2]  Cesar Jauregui,et al.  High-power fibre lasers , 2013 .

[3]  Andreas Tünnermann,et al.  Optimizing mode instability in low-NA fibers by passive strategies. , 2015, Optics letters.

[4]  Cesar Jauregui,et al.  Temporal dynamics of mode instabilities in high-power fiber lasers and amplifiers. , 2012, Optics express.

[5]  F. Hild,et al.  EPMA Measurements of Diffusion Profiles at the Submicrometre Scale , 2002 .

[6]  A. Tünnermann,et al.  Narrow linewidth, single mode 3 kW average power from a directly diode pumped ytterbium-doped low NA fiber amplifier. , 2016, Optics express.

[7]  Andreas Tünnermann,et al.  Build up and decay of mode instability in a high power fiber amplifier. , 2012, Optics express.

[8]  B. Soller,et al.  High resolution optical frequency domain reflectometry for characterization of components and assemblies. , 2005, Optics express.

[9]  F. Jansen,et al.  Passive mitigation strategies for mode instabilities in high-power fiber laser systems. , 2013, Optics express.

[10]  Michalis N. Zervas.  Transverse mode instability analysis in fiber amplifiers , 2017, LASE.

[11]  Yong-Ho Cha,et al.  Transverse mode instability induced by stimulated Brillouin scattering in a pulsed single-frequency large-core fiber amplifier. , 2015, Applied optics.

[12]  S. Unger,et al.  Photodarkening kinetics as a function of Yb concentration and the role of Al codoping. , 2012, Applied optics.

[13]  Pu Zhou,et al.  3.15 kW direct diode-pumped near diffraction-limited all-fiber-integrated fiber laser. , 2015, Applied optics.

[14]  Xiaolong Wang,et al.  5kW GTWave fiber amplifier directly pumped by commercial 976nm laser diodes. , 2016, Optics express.

[15]  T. Eidam,et al.  Experimental observations of the threshold-like onset of mode instabilities in high power fiber amplifiers. , 2011, Optics express.

[16]  Daniel Flamm,et al.  Mode resolved bend loss in few-mode optical fibers. , 2013, Optics express.

[17]  Cesar Jauregui,et al.  Simplified modelling the mode instability threshold of high power fiber amplifiers in the presence of photodarkening. , 2015, Optics express.

[18]  Oleg Shatrovoy,et al.  Diode-pumped narrow linewidth multi-kilowatt metalized Yb fiber amplifier. , 2016, Optics letters.