High-Input Impedance Voltage-Mode Multifunction Filter

This paper proposes a high-input impedance voltage-mode (VM) multifunction biquad filter which employs three current-feedback amplifiers (CFAs), three resistors, and two grounded capacitors. The proposed VM multifunction biquad filter has single-input and triple-output and can realize non-inverting low-pass (NLP), inverting band-pass (IBP), and non-inverting band-stop (NBS) voltage responses at the same time without increasing component selection. The proposed VM multifunction biquad filter enjoys the orthogonal tunability of angular frequency and quality factor and also provides the advantage of using only two grounded capacitors, high-input impedance and low active/passive sensitivity. The performance of the proposed VM multifunction biquad filter is verified through its hardware implementation and OrCAD PSpice simulation based on AD844-type CFAs. The circuit analysis, sensitivity analysis, and NLP, IBP, and NBS voltage responses are also shown in this paper. The paper presents a method to effectively reduce the active and passive components, maintain good circuit performance, and reduce circuit costs.

[1]  Costas Psychalinos,et al.  Multiple Input Single Output Universal Biquad Filter with Current Feedback Operational Amplifiers , 2010, Circuits Syst. Signal Process..

[2]  Hua-Pin Chen,et al.  A CFOA-Based Voltage-Mode Multifunction Biquadratic Filter and a Quadrature Oscillator Using the CFOA-Based Biquadratic Filter , 2019 .

[3]  Chun-Ming Chang,et al.  Voltage-mode notch, lowpass and bandpass filter using current-feedback amplifiers , 1994 .

[4]  Hung-Yu Wang,et al.  Synthesis of Cascadable DDCC-Based Universal Filter Using NAM , 2015 .

[5]  S. Z. Iqbal,et al.  CFA-based three input and two outputs voltage-mode universal filter , 2005 .

[7]  Sudhanshu Maheshwari,et al.  High-input low-output impedance all-pass filters using one active element , 2012, IET Circuits Devices Syst..

[8]  Vinod Kumar Singh,et al.  New Universal Biquads Employing CFOAs , 2006, IEEE Transactions on Circuits and Systems II: Express Briefs.

[9]  Nisar A. Shah,et al.  Versatile voltage-mode CFA-based universal filter , 2005 .

[10]  Mohd Amin Malik,et al.  New High Input Impedance Voltage-mode Lowpass, Bandpass and Highpass Filter Using Current Feedback Amplifiers , 2005, J. Circuits Syst. Comput..

[11]  S. I. Liu,et al.  New current-feedback amplifier-based universal biquadratic filter , 1995 .

[12]  Mehmet Sagbas,et al.  Three-input single-output second-order filters using current-feedback amplifiers , 2012 .

[13]  Worapong Tangsrirat,et al.  Single-resistance-controlled quadrature oscillator and universal biquad filter using CFOAs , 2009 .

[14]  Hua-Pin Chen,et al.  Versatile Voltage-Mode Biquadratic Filter and Quadrature Oscillator Using Four OTAs and Two Grounded Capacitors , 2020 .

[15]  Jiun-Wei Horng,et al.  High input impedance voltage-mode lowpass, bandpass and highpass filter using current-feedback amplifiers , 1997 .

[16]  Costas Psychalinos,et al.  Multiple-input single-output universal biquad filter using single output operational transconductance amplifiers , 2018 .

[17]  Abdhesh K. Singh,et al.  CFOA-based state-variable biquad and its high-frequency compensation , 2005, IEICE Electron. Express.

[18]  Norbert Herencsar,et al.  Universal Voltage Conveyor and its Novel Dual-Output Fully-Cascadable VM APF Application , 2017 .

[19]  Jiun-Wei Horng.  Voltage-mode universal biquad with five inputs and two outputs using two current feedback amplifiers , 2013 .

[20]  Chen-Nong Lee.  Independently tunable plus-type DDCC-based voltage-mode universal biquad filter with MISO and SIMO types , 2017, Microelectron. J..

[21]  Jiun-Wei Horng,et al.  New configuration for realizing universal voltage-mode filter using two current feedback amplifiers , 2000, IEEE Trans. Instrum. Meas..