A new methodology for the assessment of the running resistance of trains without knowing the characteristics of the track: Application to full-scale experimental data

The resistance to motion of trains is an essential requisite especially while designing high-speed trains and high-capacity railway lines. The optimisation of friction effects and aerodynamic performance can be done during the design stage of a new train but the actual value of the running resistance can be inferred only by means of full-scale tests during the operation of a train. A CEN standard (EN 14067-4) describes the methodologies for the assessment of the running resistance of railway vehicles starting from full-scale test measurements. According to this standard, the speed-dependent terms of the resistance force have to be determined by means of coasting tests on railway lines, whose characteristics must be well known. Since this is not always possible and small errors on the gradient could lead to major uncertainties in the evaluation of the resistance force, a new method for the estimation of the running resistance coefficients, irrespective of the characteristics of the track is proposed in this paper. The reliability of the method is verified by comparing the results with those obtained from the procedure proposed in the CEN standard. The comparison shows that the new methodology is able to evaluate the resistance coefficients with an accuracy equivalent to that of the other methods but with fewer tests and with a more robust procedure relying on a lesser number of parameters.

[1]  Felix Schmid,et al.  A review of methods to measure and calculate train resistances , 2000 .

[2]  Nils Olsson,et al.  Using operational data to estimate the running resistance of trains. Estimation of the resistance in a set of Norwegian tunnels , 2017, J. Rail Transp. Plan. Manag..

[3]  A Schetz,et al.  AERODYNAMICS OF HIGH-SPEED TRAINS , 2003 .

[4]  Gerd Matschke,et al.  Effects of experimental bogie fairings on the aerodynamic drag of the ETR 500 high speed train * , 2001 .

[5]  Piotr Lukaszewicz.  A simple method to determine train running resistance from full-scale measurements , 2007 .

[6]  Antonio Crespo,et al.  AERODYNAMIC OPTIMIZATION OF THE NOSE SHAPE OF A TRAIN USING THE ADJOINT METHOD , 2015 .

[7]  Sinisa Krajnovic,et al.  Shape optimization of high-speed trains for improved aerodynamic performance , 2009 .

[8]  Jeffrey W. Saunders,et al.  Aerodynamic drag reduction of goods trains , 1992 .

[9]  Christopher Baker,et al.  A review of train aerodynamics Part 2 – Applications , 2014, The Aeronautical Journal (1968).

[10]  T Maeda.  ESTIMATION OF AERODYNAMIC DRAG OF SHINKANSEN TRAINS FROM PRESSURE RISE IN TUNNEL , 1989 .

[11]  Piotr Lukaszewicz,et al.  Running resistance - results and analysis of full-scale tests with passenger and freight trains in Sweden , 2007 .

[12]  Christopher Baker,et al.  Wind tunnel tests to obtain train aerodynamic drag coefficients: Reynolds number and ground simulation effects , 1991 .

[13]  Toshiaki Setoguchi,et al.  Aerodynamics of high-speed railway train , 2002 .

[14]  Shan Huang,et al.  Moving Model Test of High-Speed Train Aerodynamic Drag Based on Stagnation Pressure Measurements , 2017, PloS one.

[15]  M Bernard,et al.  RECENT MEASURING OF THE RESISTANCE TO FORWARD MOTION OF ROLLING STOCK , 1976 .

[16]  B Nishimura,et al.  AERODYNAMIC DRAG OF TRAINS , 1967 .