Understanding liquefaction in halide perovskites upon methylamine gas exposure

Methylamine (CH3NH2, MA) gas-induced fabrication of organometal CH3NH3PbI3 based perovskite thin films are promising photovoltaic materials that transform the energy from absorbed sunlight into electrical power. Unfortunately, the low stability of the perovskites poses a serious hindrance for further development, compared to conventional inorganic materials. The solid-state perovskites are liquefied and recrystallized from CH3NH2. However, the mechanism of this phase transformation is far from clear. Employing first principles calculations and ab initio molecular dynamics simulations, we investigated the formation energy of primary defects in perovskites and the liquefaction process in CH3NH2 vapor. The results indicated that defect-assisted surface dissolution leads to the liquefaction of perovskite thin films in CH3NH2 vapor. Two primary defects were studied: one is the Frenkel pair defect (including both negatively charged interstitial iodide ion (Ii−) and iodide vacancy (VI+) at the PbI2-termination surface, and the other is the Schottky defects (methylammonium vacancy, VMA) at the MAI-termination surface. Moreover, the defect-induced disorder in the microstructure reduces the degeneration of energy levels, which leads to a blue shift and broader absorption band gap, as compared to the clean perovskite surface. The mechanism of how defects impact the surface dissolution could be applied for the further design of high-stability perovskite solar cells.

[1]  Gang Li,et al.  Stable and Efficient Organo‐Metal Halide Hybrid Perovskite Solar Cells via π‐Conjugated Lewis Base Polymer Induced Trap Passivation and Charge Extraction , 2018, Advanced materials.

[2]  L. Tan,et al.  Rashba Spin-Orbit Coupling Enhanced Carrier Lifetime in CH₃NH₃PbI₃. , 2015, Nano letters.

[3]  Aslihan Babayigit,et al.  Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite , 2015 .

[4]  Qi Chen,et al.  Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells. , 2014, Nano letters.

[5]  Nakita K. Noel,et al.  Anomalous Hysteresis in Perovskite Solar Cells. , 2014, The journal of physical chemistry letters.

[6]  Martin Schreyer,et al.  Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3) PbI3 for solid-state sensitised solar cell applications , 2013 .

[7]  Teter,et al.  Separable dual-space Gaussian pseudopotentials. , 1996, Physical review. B, Condensed matter.

[8]  Kai Zhu,et al.  Towards stable and commercially available perovskite solar cells , 2016, Nature Energy.

[9]  S. Grimme,et al.  A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu. , 2010, The Journal of chemical physics.

[10]  Meng-Che Tsai,et al.  Organometal halide perovskite solar cells: degradation and stability , 2016 .

[11]  H. Mashiyama,et al.  Structural Study on Cubic–Tetragonal Transition of CH3NH3PbI3 , 2002 .

[12]  Zikang Tang,et al.  Close-loop recycling of perovskite solar cells through dissolution-recrystallization of perovskite by butylamine , 2021 .

[13]  Michael Daub,et al.  The nature of the methylamine–MAPbI3 complex: fundamentals of gas-induced perovskite liquefaction and crystallization , 2020, Journal of Materials Chemistry A.

[14]  Burke,et al.  Generalized Gradient Approximation Made Simple. , 1996, Physical review letters.

[15]  Kai Zhu,et al.  Origin of J-V Hysteresis in Perovskite Solar Cells. , 2016, The journal of physical chemistry letters.

[16]  J. Maier,et al.  Hybrid DFT calculations of the atomic and electronic structure for ABO3 perovskite (001) surfaces , 2005 .

[17]  W. Fang,et al.  Lewis Base Passivation of Hybrid Halide Perovskites Slows Electron-Hole Recombination: Time-Domain Ab Initio Analysis. , 2018, The journal of physical chemistry letters.

[18]  K. Sohlberg,et al.  Theoretical calculations on layered perovskites: implications for photocatalysis , 2014 .

[19]  H. Uratani,et al.  Charge Carrier Trapping at Surface Defects of Perovskite Solar Cell Absorbers: A First-Principles Study. , 2017, The journal of physical chemistry letters.

[20]  D. Cahen,et al.  Understanding how excess lead iodide precursor improves halide perovskite solar cell performance , 2018, Nature Communications.

[21]  Jinsong Huang,et al.  Understanding the physical properties of hybrid perovskites for photovoltaic applications , 2017 .

[22]  Tingting Shi,et al.  Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance , 2014, Advanced materials.

[23]  Hyunjung Shin,et al.  Perovskite Cluster-Containing Solution for Scalable D-Bar Coating toward High-Throughput Perovskite Solar Cells , 2019, ACS Energy Letters.

[24]  S. Zakeeruddin,et al.  A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells , 2016, Science.

[25]  N. Zheng,et al.  Methylamine-Dimer-Induced Phase Transition towards MAPbI3 Films and High-Efficiency Perovskite Solar Modules. , 2020, Journal of the American Chemical Society.

[26]  Maksym V. Kovalenko,et al.  Properties and potential optoelectronic applications of lead halide perovskite nanocrystals , 2017, Science.

[27]  He Huang,et al.  Lead Halide Perovskite Nanocrystals in the Research Spotlight: Stability and Defect Tolerance , 2017, ACS energy letters.

[28]  G. Cui,et al.  Methylamine-Gas-Induced Defect-Healing Behavior of CH3NH3PbI3 Thin Films for Perovskite Solar Cells. , 2015, Angewandte Chemie.

[29]  Giuseppe Gigli,et al.  MAPbI3-xClx Mixed Halide Perovskite for Hybrid Solar Cells: The Role of Chloride as Dopant on the Transport and Structural Properties , 2013 .

[30]  Sergei Tretiak,et al.  High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells , 2016, Nature.

[31]  Qingchuan Zheng,et al.  Ab initio study of the cooperativity between NH···N and NH···C hydrogen bonds in H3N–HNC–HNC complex , 2010 .

[32]  Matthew R. Leyden,et al.  Post-annealing of MAPbI3 perovskite films with methylamine for efficient perovskite solar cells , 2016 .

[33]  Henry J. Snaith,et al.  Research Update: Strategies for improving the stability of perovskite solar cells , 2016 .

[34]  Jinsong Huang,et al.  π‐Conjugated Lewis Base: Efficient Trap‐Passivation and Charge‐Extraction for Hybrid Perovskite Solar Cells , 2017, Advanced materials.

[35]  Wei Chen,et al.  Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering , 2016, Nature Energy.

[36]  O. Rubel,et al.  Thermodynamic origin of instability in hybrid halide perovskites , 2016, Scientific Reports.

[37]  Su-Huai Wei,et al.  Halide perovskite materials for solar cells: a theoretical review , 2015 .

[38]  Blöchl,et al.  Projector augmented-wave method. , 1994, Physical review. B, Condensed matter.

[39]  Wei Zhang,et al.  Carrier trapping and recombination: the role of defect physics in enhancing the open circuit voltage of metal halide perovskite solar cells , 2016 .

[40]  Michele Parrinello,et al.  Quickstep: Fast and accurate density functional calculations using a mixed Gaussian and plane waves approach , 2005, Comput. Phys. Commun..

[41]  Zikang Tang,et al.  Investigation on the role of amines in the liquefaction and recrystallization process of MAPbI3 perovskite , 2020 .

[42]  Kresse,et al.  Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. , 1996, Physical review. B, Condensed matter.

[43]  Bo Chen,et al.  Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations , 2017, Nature Energy.

[44]  G. Henkelman,et al.  A climbing image nudged elastic band method for finding saddle points and minimum energy paths , 2000 .

[45]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.