Hydraulic and thermal characteristics of a vapor venting two-phase microchannel heat exchanger
暂无分享,去创建一个
Kenneth E. Goodson | Yizhang Yang | Julie E. Steinbrenner | Maxat Touzelbaev | Josef Miler | Yizhang Yang | K. Goodson | M. Touzelbaev | Milnes David | J. Steinbrenner | M. David | J. Miler
[1] Y. Zohar,et al. Forced convection boiling in a microchannel heat sink , 2001 .
[2] Satish G. Kandlikar,et al. Evaluation of Single Phase Flow in Microchannels for High Heat Flux Chip Cooling—Thermohydraulic Performance Enhancement and Fabrication Technology , 2004 .
[3] Chih-Ming Ho,et al. A Methanol-Tolerant Gas-Venting Microchannel for a Microdirect Methanol Fuel Cell , 2007, Journal of Microelectromechanical Systems.
[4] S. Zivi. Estimation of Steady-State Steam Void-Fraction by Means of the Principle of Minimum Entropy Production , 1964 .
[5] R. Hackam,et al. Effects of water salinity, electric stress and temperature on the hydrophobicity of polytetrafluoroethylene , 1998, 1998 Annual Report Conference on Electrical Insulation and Dielectric Phenomena (Cat. No.98CH36257).
[6] S. L. Smith. Void Fractions in Two-Phase Flow: A Correlation Based upon an Equal Velocity Head Model , 1969 .
[7] Albert Mosyak,et al. A uniform temperature heat sink for cooling of electronic devices , 2002 .
[8] R. Pease,et al. High-performance heat sinking for VLSI , 1981, IEEE Electron Device Letters.
[9] Ryutaro Maeda,et al. A prototype of ultrasonic micro-degassing device for portable dialysis system , 2002 .
[10] S. Kandlikar,et al. The effect of inlet constriction on bubble growth during flow boiling in microchannels , 2009 .
[11] John R. Thome,et al. Heat Transfer Model for Evaporation in Microchannels, Part I: Presentation of the Model , 2004 .
[12] John T. Wen,et al. Ledinegg instability in microchannels , 2009 .
[13] S. Garimella,et al. Single-Phase Flow and Heat Transport and Pumping Considerations in Microchannel Heat Sinks , 2004 .
[14] John R. Thome,et al. Heat Transfer Model for Evaporation in Microchannels, Part II: Comparison with the Database , 2004 .
[15] I. Mudawar,et al. Flow boiling heat transfer in two-phase micro-channel heat sinks––I. Experimental investigation and assessment of correlation methods , 2003 .
[16] S. Garimella,et al. Saturated flow boiling heat transfer and pressure drop in silicon microchannel arrays , 2008 .
[17] Kenneth E. Goodson,et al. VOLUME OF FLUID SIMULATION OF BOILING TWO-PHASE FLOW IN A VAPOR-VENTING MICROCHANNEL , 2010 .
[18] Satish G. Kandlikar,et al. Handbook of Phase Change: Boiling and Condensation , 1999 .
[19] Wen-Jong Wu,et al. Charge storage and mechanical properties of porous PTFE and composite PTFE/COC electrets , 2010 .
[20] I. Mudawar,et al. Flow boiling heat transfer in two-phase micro-channel heat sinks--II. Annular two-phase flow model , 2003 .
[21] I. Mudawar,et al. Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II—heat transfer characteristics , 2005 .
[22] Sungjun Im,et al. Integrated Microchannel Cooling for Three-Dimensional Electronic Circuit Architectures , 2005 .
[23] I. Mudawar,et al. Measurement and prediction of pressure drop in two-phase micro-channel heat sinks , 2003 .
[24] Huiying Wu,et al. Boiling instability in parallel silicon microchannels at different heat flux , 2004 .
[25] K. Goodson,et al. Vapor-Venting, Micromachined Heat Exchanger for Electronics Cooling , 2007 .
[26] Yoav Peles,et al. Pressure effects on flow boiling instabilities in parallel microchannels , 2009 .
[27] S. Yao,et al. Generalized Two-Phase Pressure Drop and Heat Transfer Correlations in Evaporative Micro/Minichannels , 2010 .
[28] Kaichiro Mishima,et al. Evaluation Analysis of Prediction Methods for Two-Phase Flow Pressure Drop in Mini-Channels , 2008 .
[29] S. Kandlikar,et al. An Extension of the Flow Boiling Correlation to Transition, Laminar, and Deep Laminar Flows in Minichannels and Microchannels , 2004, Proceeding of Compact Heat Exchangers and Enhancement Technology for the Process Industries - 2003.
[30] Satish G. Kandlikar,et al. Stabilization of Flow Boiling in Microchannels Using Pressure Drop Elements and Fabricated Nucleation Sites , 2006 .
[31] K. Goodson,et al. Temperature-Dependent Permeability of Microporous Membranes for Vapor Venting Heat Exchangers , 2008 .
[32] V. Carey. Liquid-Vapor Phase-Change Phenomena: An Introduction to the Thermophysics of Vaporization and Condensation Processes in Heat Transfer Equipment, Third Edition , 2020 .
[33] John T. Wen,et al. Analysis and active control of pressure-drop flow instabilities in boiling microchannel systems , 2010 .
[34] Sadik Kakaç,et al. A Review of two-phase flow dynamic instabilities in tube boiling systems , 2008 .
[35] I. Mudawar,et al. Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink , 2002 .
[36] M. Kaviany. Principles of heat transfer in porous media , 1991 .
[37] R. Shah,et al. Handbook of single-phase convective heat transfer , 1987 .
[38] Chang-Jin Kim,et al. A degassing plate with hydrophobic bubble capture and distributed venting for microfluidic devices , 2006 .
[39] J. Whitelaw,et al. Convective heat and mass transfer , 1966 .
[40] K. Goodson,et al. Adiabatic and diabatic two-phase venting flow in a microchannel , 2011 .
[41] Thomas W. Kenny,et al. Phase change phenomena in silicon microchannels , 2005 .
[42] Masahiro Kawaji,et al. The effect of channel diameter on adiabatic two-phase flow characteristics in microchannels ☆ , 2004 .
[43] P. Richardson,et al. Boiling heat transfer and two-phase flow , 1956 .