Evolution of microstructure and mechanical properties in Zn–Cu–Ti alloy during severe hot rolling at 300 °C

The present investigation aims to explore the evolution of microstructure and mechanical properties in Zn–Cu–Ti alloys during severe hot-rolling deformation. Twin deformation and dynamic recrystallisation are two important deformation modes of Zn–Cu–Ti alloys during hot rolling at 300 °C. Twin deformation and dynamic recrystallisation (DRX) appear one after the other. They not only consume the deformation stored energy but also inhibit initiation and growth of cracks. The elongation rate of Zn–Cu–Ti alloys has a rising trend with the increase in hot-rolling deformation. It is mainly due to grain refinement caused by increasing the ratio of DRX and twin deformation. The tensile strength of Zn–Cu–Ti alloys is found to decrease with the increase in hot-rolling deformation. This is because the solid-solution strengthening effect of copper is weakened by more deformation-induced precipitation of ε phase (CuZn_5). The solid-solution strengthening effect of copper plays an important role in the strengthening effect of Zn–Cu–Ti alloys.

[1]  G. Faraji,et al.  Hot tensile deformation and fracture behavior of ultrafine-grained AZ31 magnesium alloy processed by severe plastic deformation , 2016 .

[2]  D. Kent,et al.  Precipitation of the α-phase in an ultrafine grained beta-titanium alloy processed by severe plastic deformation , 2014 .

[3]  C. Saldana,et al.  Incipient straining in severe plastic deformation methods , 2014 .

[4]  M. Jahazi,et al.  Microstructure evolution at the onset of discontinuous dynamic recrystallization: A physics-based model of subgrain critical size , 2014 .

[5]  P. Rivera-Díaz-del-Castillo,et al.  Grain size evolution during discontinuous dynamic recrystallization , 2014 .

[6]  Zhu Yong-quan RECRYSTALLIZATION NUCLEATION MECHANISM OF FGH4096 POWDER METALLURGY SUPERALLOY , 2012 .

[7]  Su-min Zeng,et al.  Reprecipitation behavior in Al–Cu binary alloy after severe plastic deformation-induced dissolution of θ′ particles , 2012 .

[8]  Liang-ming Yan,et al.  Dynamic Recrystallization of 7055 Aluminum Alloy during Hot Deformation , 2010 .

[9]  I. Hurtado,et al.  Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates , 2010 .

[10]  Yong-Wei Zhang,et al.  Dislocation–twin interaction mechanisms for ultrahigh strength and ductility in nanotwinned metals , 2009 .

[11]  S. Murty,et al.  Dynamic recrystallization of ferrite during warm deformation of ultrafine grained ultra-low carbon steel , 2005 .

[12]  R. Kaibyshev,et al.  Continuous dynamic recrystallization in an Al–Li–Mg–Sc alloy during equal-channel angular extrusion , 2005 .

[13]  J. C. Huang,et al.  Texture analysis in hexagonal materials , 2003 .

[14]  F. Montheillet,et al.  A model of continuous dynamic recrystallization , 2003 .

[15]  K. Maruyama,et al.  The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys , 2003 .

[16]  H. Miura,et al.  Dynamic recrystallization under warm deformation of a 304 type austenitic stainless steel , 1998 .

[17]  A. Serra,et al.  Computer simulation of twinning dislocation in magnesium using a many-body potential , 1991 .

[18]  J. Roger,et al.  Combining linear polarization spectroscopy and the Representative Layer Theory to measure the Beer-Lambert law absorbance of highly scattering materials. , 2015, Analytica chimica acta.

[19]  Wang Hai-ju Nucleation mechanism of precipitate of AlN in ferrite phase of Hi-B steel , 2015 .

[20]  Xiaolei Wu,et al.  Dislocation–twin interactions in nanocrystalline fcc metals , 2011 .

[21]  Chen Zhong-jia Study of the dislocation dynamics in the plastic deformation , 2011 .

[22]  Z. Cui,et al.  Modelling of flow stress characterizing dynamic recrystallization for magnesium alloy AZ31B , 2008 .

[23]  C. Davies,et al.  Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loading , 2006 .

[24]  Taku Sakai,et al.  Preferential nucleation of dynamic recrystallization at triple junctions , 2004 .

[25]  R. S. Williams,et al.  Principles of metallography , 1920 .