Reactive compatibilization of nylon 6/styrene–acrylonitrile copolymer blends: Part 3. Tensile stress–strain behavior

[1]  D. R. Paul,et al.  Reactive compatibilization of nylon 6/styrene–acrylonitrile copolymer blends. Part 2. Dispersed phase particle size , 2000 .

[2]  D. R. Paul,et al.  Reactive compatibilization of nylon 6/styrene-acrylonitrile copolymer blends. Part 1. Phase inversion behavior , 2000 .

[3]  D. R. Paul,et al.  Blends of bisphenol A polycarbonate and rubber‐toughened styrene–maleic anhydride copolymers , 1999 .

[4]  E. Carone,et al.  Effect of adding an imidized acrylic polymer to super tough nylon 6 on stiffness and toughness , 1999 .

[5]  D. R. Paul,et al.  Morphology of PC/SAN blends: effect of reactive compatibilization, SAN concentration, processing, and viscosity ratio , 1999 .

[6]  D. R. Paul,et al.  Compatibilization of PBT/ABS blends by methyl methacrylate-glycidyl methacrylate-ethyl acrylate terpolymers , 1999 .

[7]  K. Dedecker,et al.  Reactive compatibilization of A/(B/C) polymer blends. Part 3. Quantitative analysis of the interfacial thickness and the interfacial reaction , 1998 .

[8]  A. Hiltner,et al.  Delamination failure mechanisms in microlayers of polycarbonate and poly(styrene-co-acrylonitrile) , 1998 .

[9]  Ying Yang,et al.  Polymer-polymer interface in polypropylene/polyamide blends by reactive processing , 1997 .

[10]  D. R. Paul,et al.  Influence of ABS type on morphology and mechanical properties of PC/ABS blends , 1994 .

[11]  A. Hiltner,et al.  Effect of compatibilization on the properties of polyamide 66polypropylene (7525wt/wt) blends , 1994 .

[12]  H. Meijer,et al.  Deformation and toughness of polymeric systems: 6. Critical thickness of diluted entanglement networks , 1994 .

[13]  H. Meijer,et al.  Deformation and toughness of polymeric systems: 5. A critical examination of multilayered structures , 1994 .

[14]  J. Im,et al.  Crazing phenomena in PC/SAN microlayer composites , 1994 .

[15]  A. Hiltner,et al.  The craze‐tip deformation zone in PC/SAN microlayer composites , 1994 .

[16]  A. Hiltner,et al.  Effect of compatibilization on the properties of polypropylene/polyamide‐66 (75/25 wt/wt) blends , 1994 .

[17]  A. Hiltner,et al.  Mechanisms of interactive crazing in PC/SAN microlayer composites , 1994 .

[18]  A. Hiltner,et al.  Interfacial effects produced by crystallization of polypropylene with polypropylene‐g‐maleic anhydride compatibilitzers , 1994 .

[19]  Takashi Inoue,et al.  Ellipsometric analysis on the in situ reactive compatibilization of immiscible polymer blends , 1994 .

[20]  A. Jamieson,et al.  Enthalpic effects on interfacial adhesion of immiscible polymers compatibilized with block copolymers , 1993 .

[21]  J. Kressler,et al.  Study of polymer-polymer interfaces: a comparison of ellipsometric and TEM data of PMMA/polystyrene and PMMA/SAN systems , 1993 .

[22]  A. Moet,et al.  Morphological origin of toughness in polyethylene-nylon-6 blends , 1993 .

[23]  A. Hiltner,et al.  The damage zone in microlayer composites of polycarbonate and styrene—acrylonitrile , 1993 .

[24]  A. Hiltner,et al.  The brittle-to-ductile transition in microlayer composites , 1993 .

[25]  Pj Piet Lemstra,et al.  Deformation and toughness of polymeric systems: 1. The concept of a critical thickness , 1993 .

[26]  E. Kramer,et al.  Critical molecular weight for block copolymer reinforcement of interfaces in a two-phase polymer blend , 1991 .

[27]  J. Im,et al.  Thickness effects in microlayer composites of polycarbonate and poly(styrene-acrylonitrile) , 1990 .

[28]  Takashi Inoue,et al.  Compatibilizer‐aided toughening in polymer blends consisting of brittle polymer particles dispersed in a ductile polymer matrix , 1988 .

[29]  A. Hiltner,et al.  Deformation behaviour of coextruded multilayer composites with polycarbonate and poly(styrene-acrylonitrile) , 1987 .

[30]  Kong-Khen Koo,et al.  Toughened plastics: Toughening phenomenon and its mechanism in polymer blends consisting of ductile polymer and brittle polymer. , 1986 .

[31]  J. W. Barlow,et al.  Polycarbonate blends with styrene/acrylonitrile copolymers , 1984 .

[32]  T. Kurauchi,et al.  Energy absorption in blends of polycarbonate with ABS and SAN , 1984 .