论文信息 - Estimation of uncertainty of measurements of 3D mechanisms after kinematic calibration

Estimation of uncertainty of measurements of 3D mechanisms after kinematic calibration

Calibration methods for 3D mechanisms are necessary to use the mechanisms as coordinate measuring machines. The calibration method of coordinate measuring machine using artifacts, the artifact calibration method, is proposed in taking account of traceability of the mechanism. There are kinematic parameters and form-deviation parameters in geometric parameters for describing the forward kinematic of the mechanism. In this article, the estimation methods of uncertainties using the calibrated coordinate measuring machine after the calibration are formulated. Firstly, the calculation method which takes out the values of kinematic parameters using least squares method is formulated. Secondly, the estimation value of uncertainty of the measuring machine is calculated using the error propagation method.

[1] Ichiro Inasaki,et al. Initiatives of Precision Engineering at the Beginning of a Millennium , 2002 .

[2] S. Standard. GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT , 2006 .

[3] Enrico Canuto,et al. Coordinate Measuring Machines and Machine Tools Selfcalibration and Error Correction , 1987 .

[4] Kiyoshi Takamasu,et al. Reliability on calibration of CMM , 2003 .

[5] Kiyoshi Takamasu,et al. Basic concept of feature-based metrology , 1999 .

[6] H. Kunzmann,et al. A Uniform Concept for Calibration, Acceptance Test, and Periodic Inspection of Coordinate Measuring Machines Using Reference Objects , 1990 .