Upgraded Regularized Deconvolution of complex dynamometer dynamics for an improved correction of cutting forces in milling

Abstract In order to characterize cutting mechanics during high-speed milling and micromilling applications, high-end piezoelectric dynamometers with a wide frequency bandwidth are necessary. Nevertheless, when installed into the machine tool their signal bandwidth is limited by the dynamic behaviour of the machining system. Thus, special filters have to be adopted for dynamics compensation. State of the art filters are based on a simplistic 3 × 3 dynamic model of device transmissibility without taking into account the influence of input force location with respect to the centre of the sensing platform. The Upgraded Augmented Kalman Filter has been recently proposed for solving this problem. Although it outperformed the other state of the art filters, it was based on the preliminary identification of a parametric mathematical model that is generally a difficult and non-automatic task. Here a novel non-parametric filter is introduced, that was based on a more general and abstract model of dynamometer dynamics considering both input force direction and location. By so doing, impressive results were found both from modal analysis and from real cutting tests, showing the potential of the new method for an effective and almost completely automatic cutting force dynamic compensation.

[1]  Zoltan Dombovari,et al.  Upgraded Kalman Filtering of Cutting Forces in Milling , 2020, Sensors.

[2]  Min Wan,et al.  Improved inverse filter for the correction of distorted measured cutting forces , 2017 .

[3]  Michele Monno,et al.  Upgraded stability analysis of milling operations by means of advanced modeling of tooling system bending , 2017 .

[4]  G. Totis,et al.  Breakthrough of regenerative chatter modeling in milling by including unexpected effects arising from tooling system deflection , 2017 .

[5]  Che Hassan Che Haron,et al.  Development and testing of an integrated rotating dynamometer on tool holder for milling process , 2015 .

[6]  Andreas Albrecht,et al.  High frequency bandwidth cutting force measurement in milling using capacitance displacement sensors , 2005 .

[7]  I. Yellowley,et al.  A new approach to the modeling of oblique cutting processes , 2009 .

[8]  Suleyman Yaldiz,et al.  Design, development and testing of a four-component milling dynamometer for the measurement of cutting force and torque , 2007 .

[9]  Jean-François Rigal,et al.  High Frequency Correction of Dynamometer for Cutting Force Observation in Milling , 2010 .

[10]  T. Schmitz,et al.  Low-cost, constrained-motion dynamometer for milling force measurement , 2020 .

[11]  T. Schmitz,et al.  Displacement-based dynamometer for milling force measurement , 2019, Procedia Manufacturing.

[12]  Emrullah Korkmaz,et al.  Dynamic characterization of multi-axis dynamometers , 2014 .

[13]  Emrullah Korkmaz,et al.  Accurate measurement of micromachining forces through dynamic compensation of dynamometers , 2017 .

[14]  Xuefeng Chen,et al.  Non-convex sparse regularization for impact force identification , 2020 .

[15]  Dongsheng Liu,et al.  Cutting Forces Measurement for Milling Process by Using Working Tables with Integrated PVDF Thin-Film Sensors , 2018, Sensors.

[16]  Ming Luo,et al.  A wireless instrumented milling cutter system with embedded PVDF sensors , 2018, Mechanical Systems and Signal Processing.

[17]  Gianni Campatelli,et al.  Improved dynamic compensation for accurate cutting force measurements in milling applications , 2015 .

[18]  Zhibin Zhao,et al.  Group sparse regularization for impact force identification in time domain , 2019, Journal of Sound and Vibration.

[19]  Baijie Qiao,et al.  Sparse deconvolution for the large-scale ill-posed inverse problem of impact force reconstruction , 2017 .

[20]  Bart De Moor,et al.  Subspace Identification for Linear Systems: Theory ― Implementation ― Applications , 2011 .

[21]  A. Jullien-Corrigan,et al.  Measurement of high-frequency milling forces using piezoelectric dynamometers with dynamic compensation , 2020 .

[22]  Simon S. Park,et al.  Development of a Vise with built-in Piezoelectric and Strain Gauge Sensors for Clamping and Cutting Force Measurements , 2020, Procedia Manufacturing.

[23]  Yusuf Altintas,et al.  Generalized mechanics and dynamics of metal cutting operations for unified simulations , 2016 .

[24]  Guido Wirtz,et al.  Development of a dynamometer for measuring individual cutting edge forces in face milling , 2010 .

[25]  Junyong Zhou,et al.  Matrix regularization-based method for large-scale inverse problem of force identification , 2020 .

[26]  Luis Ricardo Castro,et al.  Correction of dynamic effects on force measurements made with piezoelectric dynamometers , 2006 .

[27]  Kadir Kiran,et al.  Cutting force modeling and accurate measurement in milling of flexible workpieces , 2019, Mechanical Systems and Signal Processing.

[28]  M. Sortino,et al.  Development of a modular dynamometer for triaxial cutting force measurement in turning , 2011 .

[29]  H. Benaroya,et al.  Review of force reconstruction techniques , 2014 .

[30]  Fritz Klocke,et al.  Development of an innovative plate dynamometer for advanced milling and drilling applications , 2014 .

[31]  Jianguang Li,et al.  Development and testing of an integrated smart tool holder for four-component cutting force measurement , 2017 .

[32]  Baijie Qiao,et al.  TPA and RCSA based frequency response function modelling for cutting forces compensation , 2019 .

[33]  Zoltan Dombovari,et al.  Dominant modal decomposition method , 2017 .

[34]  Weihong Zhang,et al.  A unified instantaneous cutting force model for flat end mills with variable geometries , 2014 .

[35]  Simon S. Park,et al.  Novel multi-degrees of freedom optical table dynamometer for force measurements , 2020 .

[36]  Omer Subasi,et al.  A novel triaxial optoelectronic based dynamometer for machining processes , 2018, Sensors and Actuators A: Physical.

[37]  Simon S. Park,et al.  High frequency bandwidth measurements of micro cutting forces , 2007 .