Strength enhancement of a bi-lamellar PM Ti–6Al–4V alloy without sacrificing ductility by Al partitioning and twinning-induced plasticity effect
暂无分享,去创建一个
Xiaoli Zhao | Deliang Zhang | Meng-Xian Zhang | Congcong Wang | Yu Wang | Youyun Zhang | Lei Meng | Mengchao Zang
[1] Xiaoli Zhao,et al. The effects of Fe content on the microstructural evolution and tensile properties in Ti–6Al–4V-(2, 4)Fe alloys fabricated by thermomechanical powder consolidation , 2021 .
[2] K. Poulios,et al. Targeted heat treatment of additively manufactured Ti-6Al-4V for controlled formation of Bi-lamellar microstructures , 2021 .
[3] Binbin Zhang,et al. Influence of microstructure on the fatigue crack growth behavior of a near-alpha TWIP Ti alloy , 2021 .
[4] A. O. Moghaddam,et al. Additive manufacturing of high entropy alloys: A practical review , 2021, Journal of Materials Science & Technology.
[5] W. Xiao,et al. A novel strategy for developing α + β dual-phase titanium alloys with low Young’s modulus and high yield strength , 2021 .
[6] N. Tsuji,et al. Deformation mechanism of bimodal microstructure in Ti-6Al-4V alloy: The effects of intercritical annealing temperature and constituent hardness , 2021 .
[7] W. Zeng,et al. Impact toughness and deformation modes of Ti–6Al–4V alloy with different microstructures , 2021 .
[8] Xiaoli Zhao,et al. Stress-based fatigue behavior of Ti–6Al–4V alloy with a discontinuous lamellar microstructure fabricated by thermomechanical powder consolidation , 2020 .
[9] Y. Liu,et al. Critical microstructures and defects in heterostructured materials and their effects on mechanical properties , 2020 .
[10] N. Tsuji,et al. Achieving bi-lamellar microstructure with both high tensile strength and large ductility in Ti–6Al–4V alloy by novel thermomechanical processing , 2019 .
[11] N. Tsuji,et al. On the strain hardening abilities of α+β titanium alloys: The roles of strain partitioning and interface length density , 2019, Journal of Alloys and Compounds.
[12] F. Yuan,et al. Back-stress-induced strengthening and strain hardening in dual-phase steel , 2019, Materialia.
[13] N. Tsuji,et al. Bi-lamellar microstructure in Ti–6Al–4V: Microstructure evolution and mechanical properties , 2019, Materials Science and Engineering: A.
[14] M. Qi,et al. Influence of thermal treatment on element partitioning in α+β titanium alloy , 2019, Journal of Alloys and Compounds.
[15] Qiangwen Wang,et al. Comparative study of crack growth behaviors of fully-lamellar and bi-lamellar Ti-6Al-3Nb-2Zr-1Mo alloy , 2019, Journal of Alloys and Compounds.
[16] Xiaolei Wu,et al. Perspective on hetero-deformation induced (HDI) hardening and back stress , 2019, Materials Research Letters.
[17] Qian Sun,et al. Breaking through the strength-ductility trade-off dilemma in powder metallurgy Ti–6Al–4V titanium alloy , 2019, Materials Science and Engineering: A.
[18] Yong Jiang,et al. Characterization on stress-strain behavior of ferrite and austenite in a 2205 duplex stainless steel based on nanoindentation and finite element method , 2018, Results in Physics.
[19] R. Mccabe,et al. Deformation behavior of CP-titanium: Experiment and crystal plasticity modeling , 2018 .
[20] Rui Yang,et al. Deformation twinning in fatigue crack tip plastic zone of Ti-6Al-4V alloy with Widmanstatten microstructure , 2017 .
[21] G. P. Zhang,et al. Influence of alloy element partitioning on strength of primary α phase in Ti-6Al-4V alloy , 2017 .
[22] F. Yuan,et al. Back stress strengthening and strain hardening in gradient structure , 2016 .
[23] R. Ritchie,et al. A fracture-resistant high-entropy alloy for cryogenic applications , 2014, Science.
[24] Guang-Ping Zhang,et al. Deformation and damage behavior of colonies in a small-sized α/β Ti alloy , 2013 .
[25] P. Houtte,et al. Importance of twinning in static and dynamic compression of a Ti–6Al–4V titanium alloy with an equiaxed microstructure , 2012 .
[26] M. Preuss,et al. Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature , 2010 .
[27] Jaimie Tiley,et al. Quantification of microstructural features in α/β titanium alloys , 2004 .
[28] I. Gutiérrez,et al. Correlation between nanoindentation and tensile properties influence of the indentation size effect , 2003 .
[29] M. Starink,et al. Effect of self-accommodation on α/α boundary populations in pure titanium , 2003 .
[30] J. Albrecht,et al. Fatigue crack propagation in titanium alloys with lamellar and bi-lamellar microstructures , 2001 .
[31] M. Mills,et al. Room temperature deformation and mechanisms of slip transmission in oriented single-colony crystals of an α/β titanium alloy , 1999 .
[32] G. Lütjering. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys , 1998 .
[33] Y. Estrin,et al. Twinning-induced plasticity (TWIP) steels , 2018 .
[34] J. Williams,et al. Deformation behavior of HCP Ti-Al alloy single crystals , 2002 .
[35] G. Lütjering,et al. Microstructure and mechanical properties of titanium castings , 1997 .