Cohesive zone length of orthotropic materials undergoing delamination

Abstract Polymer-based laminated composite materials can fail by delamination. Cohesive zone development occurs during delamination, where dissipation mechanisms take place. Within a numerical framework, a fine discretization is needed along the cohesive zone length to accurately capture the non-linear stress distribution. Knowing the cohesive zone length beforehand is important for meshing purposes. This paper presents a literature review of existing analytic expressions. The limitations and range of applicability of the analytic formulas are discussed. Novel empirical formulas are proposed to predict the cohesive zone length of homogeneous orthotropic materials with a crack growing under pure mode I or pure mode II.

[1]  R O Ritchie,et al.  Fracture length scales in human cortical bone: the necessity of nonlinear fracture models. , 2006, Biomaterials.

[2]  J. Rice,et al.  The growth of slip surfaces in the progressive failure of over-consolidated clay , 1973, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[3]  Zhigang Suo,et al.  Remarks on Crack-Bridging Concepts , 1992 .

[4]  M. Elices,et al.  Nonlinear fracture of cohesive materials , 1991, International Journal of Fracture.

[5]  Zhigang Suo,et al.  Delamination R-curve phenomena due to damage , 1992 .

[6]  Zhigang Suo,et al.  Delamination Specimens for Orthotropic Materials , 1990 .

[7]  E. Smith.  The size of the fully developed softening zone associated with a crack in a strain-softening material—I. A semi-infinite crack in a remotely loaded infinite solid , 1989 .

[8]  P.M.S.T. de Castro,et al.  Mode-I interlaminar fracture of carbon/epoxy cross-ply composites , 2002 .

[9]  G. Alfano.  On the influence of the shape of the interface law on the application of cohesive-zone models , 2006 .

[10]  M. Elices,et al.  Asymptotic analysis of a cohesive crack: 1. Theoretical background , 1992 .

[11]  P. Camanho,et al.  Analytical and Numerical Investigation of the Length of the Cohesive Zone in Delaminated Composite Materials , 2008 .

[12]  Erik Lund,et al.  Analysis of the integration of cohesive elements in regard to utilization of coarse mesh in laminated composite materials , 2014 .

[13]  B. N. Cox,et al.  Concepts for bridged Mode ii delamination cracks , 1999 .

[14]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[15]  E. Smith.  The failure of a strain-softening material: I. Analytical approach for a double cantilever beam specimen , 1989 .

[16]  Stephen R Hallett,et al.  Cohesive zone length in numerical simulations of composite delamination , 2008 .

[17]  Pedro P. Camanho,et al.  An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models , 2007 .

[18]  P. C. Paris,et al.  On cracks in rectilinearly anisotropic bodies , 1965 .

[19]  D. Borst,et al.  A NON-LINEAR FINITE ELEMENT APPROACH FOR THE ANALYSIS OF MODE-I FREE EDGE DELAMINATION IN COMPOSITES , 1993 .

[20]  G. I. Barenblatt.  THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .

[21]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .