Wet Granulation Processes

[1]  Michael J. Hounslow,et al.  Tracer studies of high‐shear granulation: II. Population balance modeling , 2001 .

[2]  B. J. Ennis,et al.  Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review , 2001 .

[3]  Karen Hapgood,et al.  Nucleation and binder dispersion in wet granulation , 2000 .

[4]  P. Vonk,et al.  A model for the spray zone in early-stage fluidized bed granulation , 2006 .

[5]  M. Hounslow,et al.  Single drop behaviour in a high shear granulator , 2009 .

[6]  P. Vonk,et al.  Scale-down of a high-shear pelletisation process: flow profile and growth kinetics , 1998 .

[7]  James D. Litster,et al.  Nucleation regime map for liquid bound granules , 2003 .

[8]  Gabriel I. Tardos,et al.  Use of X-ray tomography to study the porosity and morphology of granules , 2003 .

[9]  Peter York,et al.  Scale-up of a pharmaceutical granulation in fixed bowl mixer-granulators , 1996 .

[10]  T Schaefer,et al.  Effects of interactions between powder particle size and binder viscosity on agglomerate growth mechanisms in a high shear mixer. , 2001, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[11]  Karen Hapgood,et al.  Granulation of hydrophobic powders , 2009 .

[12]  James D. Litster,et al.  Growth regime map for liquid-bound granules , 1998 .

[13]  Vincent Girard,et al.  Granule breakage phenomena in a high shear mixer; influence of process and formulation variables and consequences on granule homogeneity , 2003 .

[14]  John Bridgwater,et al.  Performance of single and six-bladed powder mixers , 2002 .

[15]  Evaluation of the physical and mechanical properties of high drug load formulations: Wet granulation vs. novel foam granulation , 2009 .

[16]  Wei Shen,et al.  Rewetting effects and droplet motion on partially wetted powder surfaces , 2009 .

[17]  James D. Litster,et al.  Fundamental studies of granule consolidation. Part 2 : Quantifying the effects of particle and binder properties , 1998 .

[18]  James D. Litster,et al.  Scale-up of mixer granulators for effective liquid distribution , 2002 .

[19]  Karen Hapgood,et al.  Stress measurements in high-shear granulators using calibrated “test” particles: application to scale-up , 2004 .

[20]  James D. Litster,et al.  Fundamental studies of granule consolidation Part 1: Effects of binder content and binder viscosity , 1996 .

[21]  J. Litster,et al.  A novel nucleation apparatus for regime separated granulation , 2007 .

[22]  Michael J. Hounslow,et al.  Tracer studies of high‐shear granulation: I. Experimental results , 2001 .

[23]  Nejat Rahmanian,et al.  Characterisation of granule structure and strength made in a high shear granulator , 2009 .

[24]  P. Holm,et al.  Effect of Impeller and Chopper Design on Granulation in a High Speed Mixer , 1987 .

[25]  Direct measurement of surface granular temperature in a high shear granulator , 2008 .

[26]  P. Sheskey,et al.  Preliminary Report of the Discovery of a New Pharmaceutical Granulation Process Using Foamed Aqueous Binders , 2004, Drug development and industrial pharmacy.

[27]  James D. Litster,et al.  The importance of wet-powder dynamic mechanical properties in understanding granulation , 2003 .

[28]  S. M. Iveson,et al.  Brittle to plastic transition in the Dynamic mechanical behavior of partially Saturated granular materials , 2004 .

[29]  John Bridgwater,et al.  Granular flow over a flat-bladed stirrer , 2001 .

[30]  S. Iveson,et al.  Dynamic strength of liquid-bound granular materials: The effect of particle size and shape , 2005 .

[31]  H. Vromans,et al.  Studies on upscaling parameters of the Gral high shear granulation process , 1993 .

[32]  James D. Litster,et al.  Breakage of drop nucleated granules in a breakage only high shear mixer , 2010 .

[33]  Gavin K. Reynolds,et al.  Breakage in granulation: A review , 2005 .

[34]  James D. Litster,et al.  Growth and compaction behaviour of copper concentrate granules in a rotating drum , 2002 .

[35]  Paul R. Mort,et al.  Scale-up and control of binder agglomeration processes : Flow and stress fields , 2009 .

[36]  K. Hapgood,et al.  Foam and drop penetration kinetics into loosely packed powder beds , 2009 .

[37]  Michael J. Hounslow,et al.  Influence of liquid binder dispersion on agglomeration in an intensive mixer , 2008 .

[38]  J. Litster,et al.  Drop penetration into porous powder beds. , 2002, Journal of colloid and interface science.

[39]  D L Massart,et al.  Scaling up of the fluidized bed granulation process. , 2003, International journal of pharmaceutics.

[40]  M. Adams,et al.  An experimental study of the impact breakage of wet granules , 2005 .

[41]  M. Hounslow,et al.  An investigation into the kinetics of liquid distribution and growth in high shear mixer agglomeration , 1998 .

[42]  James D. Litster,et al.  Liquid distribution as a means to describing the granule growth mechanism , 2002 .

[43]  J. N. Michaels,et al.  Effect of primary particle size on granule growth and endpoint determination in high-shear wet granulation , 2000 .

[44]  Jpk Seville,et al.  An investigation of the effects on agglomeration of changing the speed of a mechanical mixer , 2000 .

[45]  J. Carstensen,et al.  Physical aspects of wet granulation III. effect of wet granulation on granule porosity , 1983 .

[46]  Torben Schæfer,et al.  Melt pelletization in a high shear mixer. VIII. Effects of binder viscosity , 1996 .

[47]  Karen Hapgood,et al.  Steady states in granulation of pharmaceutical powders with application to scale-up , 2009 .

[48]  Frantisek Stepanek,et al.  Formation of hollow core granules by fluid bed in situ melt granulation: modelling and experiments. , 2006, International journal of pharmaceutics.

[49]  M. Hounslow,et al.  Surface velocity measurement in a high shear mixer , 2006 .

[50]  H W Frijlink,et al.  The use of Stokes deformation number as a predictive tool for material exchange behaviour of granules in the ’equilibrium phase’ in high shear granulation , 2005 .

[51]  James D. Litster,et al.  Wet granule breakage in a breakage only high-hear mixer: Effect of formulation properties on breakage behaviour , 2009 .

[52]  Jonathan Seville,et al.  The effect of powder size on induction behaviour and binder distribution during high shear melt agglomeration of calcium carbonate , 2008 .

[53]  Karen Hapgood,et al.  Agglomeration of hydrophobic powders via solid spreading nucleation , 2009 .

[54]  Alex C. Hoffmann,et al.  Effects and control of humidity and particle mixing in fluid-bed granulation , 1999 .

[55]  R C Rowe,et al.  Applicability of a scale-up methodology for wet granulation processes in Collette Gral high shear mixer-granulators. , 1999, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[56]  Jpk Seville,et al.  Prediction of impeller torque in high shear powder mixers , 2001 .

[57]  H. Vromans,et al.  Growth mechanisms of high-shear pelletisation , 1997 .

[58]  David Parker,et al.  Motion in a particle bed agitated by a single blade , 2000 .

[59]  Edward T. White,et al.  Dimensionless spray flux in wet granulation: Monte-Carlo simulations and experimental validation , 2004 .

[60]  H. Kristensen,et al.  Granulation in high speed mixers. III: Effects of process variables on the intragranular porosity , 1984 .

[61]  James D. Litster,et al.  Growth regime map for liquid-bound granules: further development and experimental validation , 2001 .

[62]  Denita Winstead,et al.  Study growth kinetics in fluidized bed granulation with at-line FBRM. , 2008, International journal of pharmaceutics.

[63]  Ali Hassanpour,et al.  Modeling of agglomerate behavior under shear deformation: effect of velocity field of a high shear mixer granulator on the structure of agglomerates , 2007 .

[64]  R. Boerefijn,et al.  A narrow size distribution on a high shear mixer by applying a flux number approach , 2009 .

[65]  J. Litster,et al.  Liquid distribution in wet granulation: dimensionless spray flux , 2001 .

[66]  Sotiris E. Pratsinis,et al.  Agglomeration behaviour of powders in a Lödige mixer granulator , 1998 .

[67]  G. Alderborn,et al.  Effect of drying rate on porosity and tabletting behaviour of cellulose pellets. , 2001, International journal of pharmaceutics.

[68]  Torben Schæfer,et al.  Granulation in high speed mixers. I: Effects of process variables during kneading , 1983 .

[69]  David Parker,et al.  Flow patterns in granulating systems , 2001 .

[70]  Nejat Rahmanian,et al.  Effect of scale of operation on granule strength in high shear granulators , 2008 .

[71]  Ian T. Cameron,et al.  Modelling nucleation in wet granulation , 2005 .

[72]  B.F.C. Laurent,et al.  Scaling factors in granular flow—analysis of experimental and simulations results , 2006 .

[73]  Peter Kleinebudde,et al.  Impact of screw elements on continuous granulation with a twin-screw extruder. , 2008, Journal of pharmaceutical sciences.

[74]  Susumu Hasegawa,et al.  Importance of evaluating the consolidation of granules manufactured by high shear mixer. , 2007, International journal of pharmaceutics.

[75]  S. Iveson,et al.  The dynamic strength of partially saturated powder compacts: the effect of liquid properties , 2002 .

[76]  P. Vonk,et al.  Description of agglomerate growth , 1998 .

[77]  B. Waldie,et al.  Growth mechanism and the dependence of granule size on drop size in fluidized-bed granulation , 1991 .

[78]  F. Štěpánek,et al.  Design of granule structure: Computational methods and experimental realization , 2006 .

[79]  P. Mort,et al.  Critical parameters and limiting conditions in binder granulation of fine powders , 1997 .

[80]  Bryan J. Ennis,et al.  The influence of viscosity on the strength of an axially strained pendular liquid bridge , 1990 .

[81]  Torben Schæfer,et al.  Melt pelletization in a high shear mixer. IX. Effects of binder particle size , 1996 .

[82]  Karen Hapgood,et al.  A method to predict nuclei size distributions for use in models of wet granulation , 2009 .

[83]  Paul R. Mort,et al.  Scale-up of binder agglomeration processes , 2005 .

[84]  Matthew Denesuk,et al.  Capillary Penetration of Liquid Droplets into Porous Materials , 1993 .

[85]  Jean Paul Remon,et al.  Continuous granulation in the pharmaceutical industry , 2005 .

[86]  Aibing Yu,et al.  Simulated and measured flow of granules in a bladed mixer—a detailed comparison , 2001 .

[87]  David G. Schaeffer,et al.  Forces on a slowly rotating, rough cylinder in a Couette device containing a dry, frictional powder , 1998 .

[88]  Karen Hapgood,et al.  Improving liquid distribution by reducing dimensionless spray flux in wet granulation—A pharmaceutical manufacturing case study , 2010 .

[89]  Russell V. Plank,et al.  Quantifying liquid coverage and powder flux in high-shear granulators , 2003 .