Sensitivity analysis of material input data influence on machining induced residual stress prediction in Inconel 718

Abstract Inconel 718 is commonly used in structural critical components of aircraft engines due to its properties at high temperatures. In order manufacture the final part, these components have to be machined, so the final surface integrity obtained after machining becomes a key issue. Residual stresses, which are included in surface integrity, are an important issue. Although much of the research carried out on machining induced residual stresses has been empirical, finite element modelling appears to be a complementary solution to gain understanding of it. However, some of the major drawbacks still need to be solved before it can become a reliable tool for industry, such us the identification of input parameters and computational cost. This paper deals with the study of machining induced residual stresses. An orthogonal cutting 2D finite element model was used and a sensitivity analysis was conducted to determine the influence of model input data on the predicted residual stresses. The results obtained from the sensitivity analysis showed that material constitutive law was the most relevant input data when predicting residual stress fields. Importantly the material behaviour at a high heating rate in adition to high strain rate must be considered.