论文信息 - Development of 3000 m Subsea Blowout Preventer Experimental Prototype

Development of 3000 m Subsea Blowout Preventer Experimental Prototype

A subsea blowout preventer experimental prototype is developed to meet the requirement of training operators, and the prototype consists of hydraulic control system, electronic control system and small-sized blowout preventer stack. Both the hydraulic control system and the electronic system are dual-mode redundant systems. Each system works independently and is switchable when there are any malfunctions. And it significantly improves the operation reliability of the equipment.

Yubin Zhao | Yunpeng Ma | Yonghong Liu | Baoping Cai | Zhiqian Huang

[1] Yonghong Liu,et al. Development of an automatic subsea blowout preventer stack control system using PLC based SCADA. , 2012, ISA transactions.

[2] Hanlin Liu,et al. A Data-Driven Fault Diagnosis Methodology in Three-Phase Inverters for PMSM Drive Systems , 2017, IEEE Transactions on Power Electronics.

[3] Jon Espen Skogdalen,et al. Developing safety indicators for preventing offshore oil and gas deepwater drilling blowouts , 2011 .

[4] Qian Fan,et al. Multi-source information fusion based fault diagnosis of ground-source heat pump using Bayesian network , 2014 .

[5] W. F. Harlow,et al. BP initial image repair strategies after the Deepwater Horizon spill , 2011 .

[6] Yunpeng Ma,et al. Real-time reliability evaluation methodology based on dynamic Bayesian networks: A case study of a subsea pipe ram BOP system. , 2015, ISA transactions.

[7] Lei Huang,et al. Bayesian Networks in Fault Diagnosis , 2017, IEEE Transactions on Industrial Informatics.