State of the art of tool texturing in machining

[1]  S. Melkote,et al.  Wear of WC inserts textured by shot peening and electrical discharge machining , 2020 .

[2]  K. Patra,et al.  Combined effects of tool surface texturing, cutting parameters and minimum quantity lubrication (MQL) pressure on micro-grinding of BK7 glass , 2020 .

[3]  Shixiong Wu,et al.  Grinding of alumina ceramic with microtextured brazed diamond end grinding wheels , 2020, Ceramics International.

[4]  Sudarsan Ghosh,et al.  Machining performance evaluation of Ti6Al4V alloy with laser textured tools under MQL and nano-MQL environments , 2020 .

[5]  J. S. Dureja,et al.  Wear behavior of textured tools under graphene-assisted minimum quantity lubrication system in machining Ti-6Al-4V alloy , 2020 .

[6]  Yassmin Seid Ahmed,et al.  The effect of laser micro-scale textured tools on the tool-chip interface performance and surface integrity during austenitic stainless-steel turning , 2020 .

[7]  L. Peña-Parás,et al.  Enhancing tool life, and reducing power consumption and surface roughness in milling processes by nanolubricants and laser surface texturing , 2020 .

[8]  Suril R. Shah,et al.  Effect of Micro-Textured Tool Parameters on Forces, Stresses, Wear Rate, and Variable Friction in Titanium Alloy Machining , 2020 .

[9]  P. Sivaiah,et al.  Effect of Surface Texture Tools and Minimum Quantity Lubrication (MQL) on tool Wear and Surface Roughness in CNC Turning of AISI 52100 Steel , 2020, Journal of The Institution of Engineers (India): Series C.

[10]  T. Jagadesh,et al.  Investigations into solid lubricant filled textured tools on hole geometry and surface integrity during drilling of aluminium alloy , 2020 .

[11]  Debabrata Barik,et al.  Experimental analysis on turning of AISI 4340 steel using non-textured, dimple textured and MoS2 coated dimple textured carbide cutting inserts at the rack surface , 2020 .

[12]  P. Sivaiah,et al.  Effect of novel hybrid texture tool on turning process performance in MQL machining of Inconel 718 superalloy , 2020 .

[13]  Tianjiao Wang,et al.  Micro-texture design criteria for cemented carbide ball-end milling cutters , 2020, Journal of Mechanical Science and Technology.

[14]  M. Pacella,et al.  Effect of laser texturing on the performance of ultra-hard single-point cutting tools , 2019, The International Journal of Advanced Manufacturing Technology.

[15]  Tianbiao Yu,et al.  Study on textured CBN grinding wheel by laser cladding , 2019, The International Journal of Advanced Manufacturing Technology.

[16]  Xin Liu,et al.  Performances of micro-textured WC-10Ni3Al cemented carbides cutting tool in turning of Ti6Al4V , 2019, International Journal of Refractory Metals and Hard Materials.

[17]  N. Morita,et al.  Effect of texture shape on machining performance of textured diamond cutting tool , 2019, Precision Engineering.

[18]  Sven Klein,et al.  Surface structuring of polycrystalline diamond (PCD) using ultrashort pulse laser and the study of force conditions , 2019, International Journal of Refractory Metals and Hard Materials.

[19]  Francisco Profito,et al.  Multi-Scale Surface Texturing in Tribology—Current Knowledge and Future Perspectives , 2019, Lubricants.

[20]  S. K. Rajbongshi,et al.  Performance parameters studies in machining of AISI D2 steel with dot-textured, groove-textured & non-textured cutting tool at the flank face , 2019, International Journal of Refractory Metals and Hard Materials.

[21]  Sandro Wartzack,et al.  Designing surface textures for EHL point-contacts - Transient 3D simulations, meta-modeling and experimental validation , 2019, Tribology International.

[22]  X. Guo,et al.  The coupling effect of micro-groove textures and nanofluids on cutting performance of uncoated cemented carbide tools in milling Ti-6Al-4V , 2019, Journal of Materials Processing Technology.

[23]  E. Shamoto,et al.  Frictional properties of surface textures fabricated on hardened steel by elliptical vibration diamond cutting , 2019, Precision Engineering.

[24]  S. Lei,et al.  Effect of derivative cutting on machining performance of micro textured tools , 2019, Journal of Manufacturing Processes.

[25]  M. Jackson,et al.  Influence of milling direction in the machinability of Inconel 718 with submicron grain cemented carbide tools , 2019, The International Journal of Advanced Manufacturing Technology.

[26]  Shimizu,et al.  Lubrication Analysis of Micro-Dimple Textured Die Surface by Direct Observation of Contact Interface in Sheet Metal Forming , 2019, Metals.

[27]  Jianxin Deng,et al.  Effect of micro-textures on cutting fluid lubrication of cemented carbide tools , 2019, The International Journal of Advanced Manufacturing Technology.

[28]  Jiyun Zhang,et al.  Study on secondary cutting phenomenon of micro-textured self-lubricating ceramic cutting tools with different morphology parameters formed via in situ forming of Al2O3-TiC , 2019, The International Journal of Advanced Manufacturing Technology.

[29]  M. Jackson,et al.  Performance evaluation of vegetable-based cutting fluids in turning of AISI 1050 steel , 2019, The International Journal of Advanced Manufacturing Technology.

[30]  S. Hiremath,et al.  Role of textured tool in improving machining performance: A review , 2019, Journal of Manufacturing Processes.

[31]  A. Rosenkranz,et al.  Surface Texturing in Machine Elements − A Critical Discussion for Rolling and Sliding Contacts , 2019, Advanced Engineering Materials.

[32]  Francesco Baino,et al.  Laser Surface Texturing of Alumina/Zirconia Composite Ceramics for Potential Use in Hip Joint Prosthesis , 2019, Coatings.

[33]  Lining Sun,et al.  Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel , 2019, Journal of Manufacturing Processes.

[34]  Lars Mattsson,et al.  The effects of laser surface texture applied to internal combustion engine journal bearing shells – An experimental study , 2019, Tribology International.

[35]  Yuxin Jiao,et al.  Investigation on Cutting Performance of Micro-Textured Cutting Tools , 2019, Micromachines.

[36]  Longhua Xu,et al.  3D FEM simulation of the turning process of stainless steel 17-4PH with differently texturized cutting tools , 2019, International Journal of Mechanical Sciences.

[37]  R. Ruzzi,et al.  Analysis of the coefficient of friction at the workpiece-tool interface in milling of high strength compacted graphite cast irons , 2019, Wear.

[38]  M. Khonsari,et al.  Experimental verification of textured mechanical seal designed using multi-objective optimization , 2019, Industrial Lubrication and Tribology.

[39]  Zhankuan Zhang,et al.  Effect of cutting tool with micro-pits texture on wood cutting performance , 2019, PloS one.

[40]  V. Senthilkumar,et al.  Performance of surface textured tools during machining of Al-Cu/TiB2 composite , 2019, Measurement.

[41]  José García,et al.  Cemented carbide microstructures: a review , 2019, International Journal of Refractory Metals and Hard Materials.

[42]  Jun Wang,et al.  Enhancing the machining performance by cutting tool surface modifications: a focused review , 2019, Machining Science and Technology.

[43]  S. Mishra,et al.  Performance of laser processed carbide tools for machining of Ti6Al4V alloys: A combined study on experimental and finite element analysis , 2019, Precision Engineering.

[44]  Y. Lian,et al.  Performance of Microtextured Tools Fabricated by Inductively Coupled Plasma Etching in Dry Cutting Tests on Medium Carbon Steel Workpieces , 2019, International Journal of Precision Engineering and Manufacturing-Green Technology.

[45]  K. Balasubramanian,et al.  Machinability analysis of high strength materials with Cryo-Treated textured tungsten carbide inserts , 2019, Materials and Manufacturing Processes.

[46]  J. S. Dureja,et al.  Performance evaluation of textured carbide tools under environment-friendly minimum quantity lubrication turning strategies , 2019, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[47]  A. D’yakonov,et al.  On-machine texturing of PCD micro-tools for dry micro-slot grinding of BK7 glass , 2019, Precision Engineering.

[48]  T. Beno,et al.  Investigation of micro-textured cutting tools used for face turning of alloy 718 with high-pressure cooling , 2019, Journal of Manufacturing Processes.

[49]  Song Yu,et al.  The Surface Integrity of Titanium Alloy When Using Micro-Textured Ball-End Milling Cutters , 2018, Micromachines.

[50]  Meinam Annebushan Singh,et al.  A comparative study in machining of AISI D2 steel using textured and non-textured coated carbide tool at the flank face , 2018, Journal of Manufacturing Processes.

[51]  W. Wang,et al.  Effect of nano-scale texture pretreatment on wear resistance of WC/Co tools with/without TiAlN coated flank-face in dry turning of green Al2O3 ceramics , 2018, Ceramics International.

[52]  I. A. Palani,et al.  Influence of dimple and spot-texturing of HSS cutting tool on machining of Ti-6Al-4V , 2018, Journal of Materials Processing Technology.

[53]  Kun Liu,et al.  Effect of conical micro-grooved texture on tool–chip friction property and cutting performance of WC-TiC/Co cemented carbide tools , 2018, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

[54]  Ning He,et al.  Cutting performance of textured polycrystalline diamond tools with composite lyophilic/lyophobic wettabilities , 2018, Journal of Materials Processing Technology.

[55]  Xiaobin Cui,et al.  Intermittent turning performance of ceramic tools with surface micro-geometry designed considering fluid-like behavior of chip , 2018, Ceramics International.

[56]  Rui Li,et al.  Experimental Investigation of Concave and Convex Micro-Textures for Improving Anti-Adhesion Property of Cutting Tool in Dry Finish Cutting , 2018, International Journal of Precision Engineering and Manufacturing-Green Technology.

[57]  Yumei Song,et al.  Study on Surface Roughness of Gcr15 Machined by Micro-Texture PCBN Tools , 2018, Machines.

[58]  T. Ko,et al.  Performance of surface-textured end-mill insert on AISI 1045 steel , 2018, Materials and Manufacturing Processes.

[59]  M. R. Sankar,et al.  Environmental friendly hard machining performance of uncoated and MoS 2 coated mechanical micro-textured tungsten carbide cutting tools , 2018, Tribology International.

[60]  U. S. Dixit,et al.  Environmentally friendly machining with MoS2-filled mechanically microtextured cutting tools , 2018, Journal of Mechanical Science and Technology.

[61]  W. Wang,et al.  Effect of texture parameters on cutting performance of flank-faced textured carbide tools in dry cutting of green Al2O3 ceramics , 2018, Ceramics International.

[62]  G. Wang,et al.  Cutting mechanism and performance of high-speed machining of a titanium alloy using a super-hard textured tool , 2018, Journal of Manufacturing Processes.

[63]  Yongzhi Zhou,et al.  Evaluation of the machinability of titanium alloy using a micro-textured ball end milling cutter , 2018, The International Journal of Advanced Manufacturing Technology.

[64]  Yonghong Fu,et al.  Performance of Cemented Carbide Cutting Tools With Volcano-Like Texture on Rake Face , 2018, Volume 4: Processes.

[65]  S. Castagne,et al.  An experimental study into the effect of micro-textures on the performance of cutting tool , 2018, The International Journal of Advanced Manufacturing Technology.

[66]  S. Mishra,et al.  3D finite element investigations on textured tools with different geometrical shapes for dry machining of titanium alloys , 2018, International Journal of Mechanical Sciences.

[67]  Peng Huang,et al.  Analysis of tool-chip interface characteristics of self-lubricating tools with nanotextures and WS2/Zr coatings in dry cutting , 2018 .

[68]  K. Kalaichelvan,et al.  Comparative study of the effect of surface texturing on cutting tool in dry cutting , 2018 .

[69]  G. Samuel,et al.  Drilling performance of micro textured tools under dry, wet and MQL condition , 2018 .

[70]  S. Lei,et al.  Experimental Investigation and Mechanism Analysis of Tungsten Disulfide Soft Coated Micro-Nano Textured Self-Lubricating Dry Cutting Tools , 2018, International Journal of Precision Engineering and Manufacturing-Green Technology.

[71]  Jianxin Deng,et al.  An approach to predict derivative-chip formation in derivative cutting of micro-textured tools , 2018 .

[72]  Daniel Gropper,et al.  A numerical model for design and optimization of surface textures for tilting pad thrust bearings , 2018 .

[73]  C. Kumar,et al.  Effect of WEDM surface texturing on Al2O3/TiCN composite ceramic tools in dry cutting of hardened steel , 2018 .

[74]  S. Mishra,et al.  Characterization and machining performance of laser-textured chevron shaped tools coated with AlTiN and AlCrN coatings , 2018 .

[75]  Rudolph F. Laubscher,et al.  Sustainable machining of titanium alloys: A critical review , 2017 .

[76]  Lining Sun,et al.  Improving dry machining performance of TiAlN hard-coated tools through combined technology of femtosecond laser-textures and WS2 soft-coatings , 2017 .

[77]  G. L. Samuel,et al.  Surface texturing for tribology enhancement and its application on drill tool for the sustainable machining of titanium alloy , 2017 .

[78]  Zhang Wenquan,et al.  Fabrication techniques and cutting performance of micro-textured self-lubricating ceramic cutting tools by in-situ forming of Al2O3-TiC , 2017 .

[79]  G. Mallmann,et al.  Analysis of dimple textured surfaces on cutting tools , 2017 .

[80]  A. Rosenkranz,et al.  Frictional Performance Assessment of Cemented Carbide Surfaces Textured by Laser , 2017 .

[81]  Wenlong Song,et al.  Experimental study on the cutting temperature of textured carbide tool embedded with graphite , 2017 .

[82]  V. Senthilkumar,et al.  Experimental studies on the cryogenic machining of biodegradable ZK60 Mg alloy using micro-textured tools , 2017 .

[83]  Toshiyuki Obikawa,et al.  Cooling performance of micro-texture at the tool flank face under high pressure jet coolant assistance , 2017 .

[84]  T. Sugihara,et al.  Performance of cutting tools with dimple textured surfaces: A comparative study of different texture patterns , 2017 .

[85]  Shiqi Fang,et al.  Wear Characterization of Cemented Carbides (WC–CoNi) Processed by Laser Surface Texturing under Abrasive Machining Conditions , 2017 .

[86]  Gang Wang,et al.  Cutting performance of micro-textured polycrystalline diamond tool in dry cutting , 2017 .

[87]  H. Costa,et al.  Maskless Electrochemical Texturing of Automotive Cylinders , 2017 .

[88]  Yongjie Chen,et al.  Experimental investigation with respect to the performance of deep submillimeter-scaled textured tools in dry turning titanium alloy Ti-6Al-4V , 2017 .

[89]  Hui Chen,et al.  Experimental assessment of derivative cutting of micro-textured tools in dry cutting of medium carbon steels , 2017 .

[90]  H. Costa,et al.  Tribological behavior of gray cast iron textured by maskless electrochemical texturing , 2017 .

[91]  A. Meena,et al.  Influence of micro scale textured tools on tribological properties at tool-chip interface in turning AISI 316 austenitic stainless steel , 2017 .

[92]  Chaneel Park,et al.  Effects of micro textured sapphire tool regarding cutting forces in turning operations , 2017 .

[93]  Toshiyuki Enomoto,et al.  Development of a novel cubic boron nitride cutting tool with a textured flank face for high-speed machining of Inconel 718 , 2017 .

[94]  S. Kanmani Subbu,et al.  Performance of laser surface textured high speed steel cutting tool in machining of Al7075-T6 aerospace alloy , 2017 .

[95]  Pulak M. Pandey,et al.  Geometrical design optimization of hybrid textured self-lubricating cutting inserts for turning 4340 hardened steel , 2017 .

[96]  S. M. Hsu,et al.  A critical assessment of surface texturing for friction and wear improvement , 2017 .

[97]  Xiang Zhang,et al.  Wear resistance of carbide tools with textured flank-face in dry cutting of green alumina ceramics , 2017 .

[98]  Pulak M. Pandey,et al.  Recent advances in turning with textured cutting tools: A review , 2016 .

[99]  Ian M. Hutchings,et al.  Leonardo da Vinci's studies of friction , 2016 .

[100]  Haji Hassan Masjuki,et al.  Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review , 2016 .

[101]  Kornel Ehmann,et al.  Ultrasonic elliptical vibration texturing of the rake face of carbide cutting tools for adhesion reduction , 2016 .

[102]  Jian Cao,et al.  Experimental Assessment of Laser Textured Cutting Tools in Dry Cutting of Aluminum Alloys , 2016 .

[103]  Hyung Wook Park,et al.  Influence of a micropatterned insert on characteristics of the tool–workpiece interface in a hard turning process , 2016 .

[104]  Jianxin Deng,et al.  Effect of hybrid texture combining micro-pits and micro-grooves on cutting performance of WC/Co-based tools , 2016 .

[105]  D. Gropper,et al.  Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings , 2016 .

[106]  Moola Mohan Reddy,et al.  Environmental friendly cutting fluids and cooling techniques in machining: a review , 2014 .

[107]  Jian Cao,et al.  Surface Texturing of Drill Bits for Adhesion Reduction and Tool Life Enhancement , 2013, Tribology Letters.

[108]  J. N. Anno,et al.  Load Support and Leakage from Microasperity-Lubricated Face Seals , 1969 .

[109]  D. Moore,et al.  A history of research on surface texture effects , 1969 .

[110]  J. A. Walowit,et al.  A Theory of Lubrication by Microirregularities , 1966 .

[111]  M. C. Shaw.  Metal Cutting Principles , 1960 .

[112]  S. K. Rajbongshi,et al.  A study in turning of AISI D2 steel with textured and non-textured coated carbide tool at the flank face , 2020 .

[113]  Yadong Chen,et al.  Study on the surface quality of CFRP machined by micro-textured milling tools , 2019, Journal of Manufacturing Processes.

[114]  Suril R. Shah,et al.  Orthogonal cutting of alloy steel 4340 with micro-grooved cutting tools , 2019, Procedia CIRP.

[115]  F. Pušavec,et al.  Influence of rake face texturing on machining performance of carbide tools , 2019, Procedia CIRP.

[116]  U. S. Dixit,et al.  Tribological and Machining Performance of Graphite-, CaF2- and MoS2-Coated Mechanical Micro-textured Self-lubricating Cutting Tool , 2019, Lecture Notes on Multidisciplinary Industrial Engineering.

[117]  A. D. Jayal,et al.  Effects of surface texture parameters of cutting tools on friction conditions at tool-chip interface during dry machining of AISI 1045 steel , 2019, Procedia Manufacturing.

[118]  S. K. Choudhury,et al.  Tribological aspects of various geometrically shaped micro-textures on cutting insert to improve tool life in hard turning process , 2018 .

[119]  V. Senthilkumar,et al.  Effect of Textured Tools on Machining of Ti-6Al-4V Alloy under Lubricant Condition , 2018 .

[120]  Noboru Morita,et al.  Development and machining performance of a textured diamond cutting tool fabricated with a focused ion beam and heat treatment , 2017 .

[121]  Gopala Rao Thellaputta,et al.  Machinability of Nickel Based Superalloys: A Review , 2017 .

[122]  Dirk Bähre,et al.  Analysis of Different Surface Structures of Hard Metal Guiding Stones in the Honing Process , 2017 .

[123]  T. Sugihara,et al.  Development of novel cutting tools with dimple textured surfaces for dry machining of aluminum alloys , 2017 .

[124]  M. Ravi Sankar,et al.  State of the art on micro to nano textured cutting tools , 2017 .

[125]  F. Mücklich,et al.  Tribological Performance of Laser Patterned Cemented Tungsten Carbide Parts , 2016 .

[126]  D. Arulkirubakaran,et al.  Effect of micro-textured tools on machining of Ti–6Al–4V alloy: An experimental and numerical approach , 2016 .

[127]  P. V. Rao,et al.  Performance Evaluation of Novel Micro-textured Tools in Improving the Machinability of Aluminum Alloy (Al 6063) , 2016 .

[128]  Jian Cao,et al.  Friction anisotropy of Aluminum 6111-T4 sheet with flat and laser-textured D2 tooling , 2015 .

[129]  V. Astakhov.  Tribology of metal cutting , 2006 .

[130]  Izhak Etsion,et al.  A Model for Mechanical Seals with Regular Microsurface Structure , 1996 .