Convective mass transfer and pressure drop correlations for cross-flow structured hollow fiber membrane bundles under low Reynolds numbers but with turbulent flow behaviors

Abstract Cross-flow structured hollow fiber membrane bundles where the fibers are arranged either in inline or in staggered arrays are investigated for their bundle side convective mass transfer and pressure drop characteristics. A high speed hot wire anemometry is used to validate the turbulent flow behavior in the bundle at low Reynolds numbers. A mathematical model for the turbulent fluid flow and convective mass transfer across the bundle under uniform mass boundary conditions is set up, which is then validated by an air humidification test. With the validated model, the Sherwood numbers and friction factors across the bundle are obtained for different fiber arrangements, pitch to diameter ratios, and Reynolds numbers. Correlations are then proposed to estimate the friction factors and Sherwood numbers across the bundles with various parameters. It is found that compared to the previous researches and the available correlations, the present results are more appropriate for the cross flow hollow fiber membrane bundles that are usually operated under low Reynolds numbers from 100 to 500, but have turbulent flow behaviors.

[2]  J. Niu,et al.  Laminar fluid flow and mass transfer in a standard field and laboratory emission cell , 2003 .

[3]  Waqar A. Khan,et al.  Convection heat transfer from tube banks in crossflow: Analytical approach , 2005 .

[4]  Wen-Quan Tao,et al.  Numerical prediction for laminar forced convection heat transfer in parallel-plate channels with streamwise-periodic rod disturbances , 1998 .

[5]  Ng Niels Deen,et al.  Numerical investigation of hydrodynamics and mass transfer for in-line fiber arrays in laminar cross-flow at low Reynolds numbers , 2005 .

[6]  Geert Versteeg,et al.  Gas-liquid mass transfer in a cross-flow hollow fiber module: Analytical model and experimental validation , 2005 .

[7]  Mark F. Tachie,et al.  EXPERIMENTAL AND NUMERICAL INVESTIGATION OF TURBULENT CROSS-FLOW IN A STAGGERED TUBE BUNDLE , 2008 .

[8]  Helmuth Hausen,et al.  Heat transfer in counterflow, parallel-flow, and cross-flow , 1983 .

[9]  Zhao Zhang,et al.  Numerical Study of Particle Deposition in Two Differently Ventilated Rooms , 2004 .

[10]  Ross Taylor,et al.  Multicomponent mass transfer , 1993 .

[11]  Jianlei Niu,et al.  CFD Study of the Thermal Environment around a Human Body: A Review , 2005 .

[12]  G. Mompean,et al.  Numerical simulation of a turbulent flow near a right-angled corner using the Speziale non-linear model with RNG K–ε equations , 1998 .

[13]  Li-Zhi Zhang.  Heat and mass transfer in a randomly packed hollow fiber membrane module: A fractal model approach , 2011 .

[14]  Ming-Chien Yang,et al.  Designing hollow‐fiber contactors , 1986 .

[15]  A. Zukauskas.  Heat Transfer from Tubes in Crossflow , 1972 .

[16]  F. Kreith,et al.  Principles of heat transfer , 1962 .

[17]  S. Bergero,et al.  Experimental and theoretical analysis of air humidification/dehumidification processes using hydrophobic capillary contactors , 2001 .

[18]  A. E. Jansen,et al.  Membrane Gas Absorption Processes in Environmental Applications , 1994 .

[19]  K. Sirkar,et al.  Dispersion‐free solvent extraction with microporous hollow‐fiber modules , 1988 .