Effect of the preload in the general static load‐carrying capacity of four‐contact‐point slewing bearings for wind turbine generators: theoretical model and finite element calculations

[1]  Long Chen,et al.  Contact Stress and Deformation of Blade Bearing in Wind Turbine , 2010, 2010 International Conference on Measuring Technology and Mechatronics Automation.

[2]  Daniel Nelias,et al.  Ball Motion and Sliding Friction in a Four-Contact-Point Ball Bearing , 2007 .

[3]  Alain Daidié,et al.  3D Simplified Finite Elements Analysis of Load and Contact Angle in a Slewing Ball Bearing , 2008 .

[4]  Josu Aguirrebeitia,et al.  Theoretical calculation of general static load-carrying capacity for the design and selection of three row roller slewing bearings , 2012 .

[5]  Josu Aguirrebeitia,et al.  Calculation of General Static Load-Carrying Capacity for the Design of Four-Contact-Point Slewing Bearings , 2010 .

[6]  Josu Aguirrebeitia,et al.  General static load-carrying capacity for the design and selection of four contact point slewing bearings: Finite element calculations and theoretical model validation , 2012 .

[7]  Seong Ho Kang,et al.  An Analytical Comparison Between Ball and Crossed Roller Bearings for Utilization in Actuator Modules for Precision Modular Robots , 2003, DAC 2003.

[8]  Luc Houpert,et al.  An Engineering Approach to Hertzian Contact Elasticity—Part I , 2001 .

[9]  Jorge Damian,et al.  Load distribution in a four contact-point slewing bearing , 2003 .

[10]  Yun Feng Li.  Static Load Capacity of Three-Row Roller Slewing Bearing Considering Clearances , 2011 .

[11]  Josu Aguirrebeitia,et al.  General static load‐carrying capacity of four‐contact‐point slewing bearings for wind turbine generator actuation systems , 2013 .