Regolith Derived Heat Shield for Planetary Body Entry and Descent System with In Situ Fabrication

In this paper we will discuss a new mass-efficient and innovative way of protecting high-mass spacecraft during planetary Entry, Descent & Landing (EDL). Heat shields fabricated in situ can provide a thermal-protection system (TPS) for spacecraft that routinely enter a planetary atmosphere. By fabricating the heat shield with space resources from regolith materials available on moons and asteroids, it is possible to avoid launching the heat-shield mass from Earth. Three regolith processing and manufacturing methods will be discussed: 1) oxygen & metal extraction ISRU processes produce glassy melts enriched in alumina and titania, processed to obtain variable density, high melting point and heat-resistance; 2) compression and sintering of the regolith yield low density materials; 3) in-situ derived high-temperature polymers created to bind regolith particles together, with a lower energy budget.

[1]  P. Hintze,et al.  Building a Lunar or Martian Launch Pad with In Situ Materials: Recent Laboratory and Field Studies , 2013 .

[2]  A. Bandyopadhyay,et al.  First Demonstration on Direct Laser Fabrication of Lunar Regolith Parts , 2012 .

[3]  David Saunders,et al.  On Heatshield Shapes for Mars Entry Capsules , 2012 .

[4]  Jesus A. Dominguez,et al.  Joule-Heated Molten Regolith Electrolysis Reactor Concepts for Oxygen and Metals Production on the Moon and Mars , 2012 .

[5]  C. Foster.  Delta-V Budgets for Robotic and Human Exploration of Phobos and Deimos , 2011 .

[6]  P. Hintze,et al.  A Conceptual Study for the Autonomous Direct Forming of Lunar Regolith into FlexlockTM Geomats for Lunar Surface Operations , 2011 .

[7]  Nagi N. Mansour,et al.  Multiscale Approach to Ablation Modeling of Phenolic Impregnated Carbon Ablators , 2010 .

[8]  Robert J. Gustafson,et al.  Analog Field Testing of the Carbothermal Regolith Reduction Processing System , 2010 .

[9]  R. Sostaric.  The Challenge of Mars EDL (Entry, Descent, and Landing) , 2010 .

[10]  S. Hoffman,et al.  Human exploration of Mars, Design Reference Architecture 5.0 , 2010, 2010 IEEE Aerospace Conference.

[11]  Robert J. Gustafson,et al.  Demonstrating the Solar Carbothermal Reduction of Lunar Regolith to Produce Oxygen , 2010 .

[12]  Bruce Keller,et al.  Field Test Results of the PILOT Hydrogen Reduction Reactor , 2009 .

[13]  Scott A. Berry,et al.  Aerothermal Testing for Project Orion Crew Exploration Vehicle , 2009 .

[14]  W. Broecker.  Wally's quest to understand the ocean's CaCO3 cycle. , 2009, Annual review of marine science.

[15]  P. Hintze,et al.  A Conceptual Study for the Autonomous Direct Forming of Lunar Regolith into Flexlock (Trademark) Geomats for Lunar Surface Operations , 2009 .

[16]  P. Hintze,et al.  Lunar Surface Stabilization via Sintering or the use of Heat Cured Polymers , 2009 .

[17]  David J. Kinney,et al.  Development of the ORION Crew Exploration Vehicle's Aerothermal Database Using A Combination of High Fidelity CFD and Engineering Level Methods , 2009 .

[18]  D. Stefanescu,et al.  Recent Advances in Scale-up Development of Molten Regolith Electrolysis for Oxygen Production in support of a Lunar Base , 2009 .

[19]  Niels N. Sørensen,et al.  AIAA Meeting Papers On Disc : 47th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition , 2009 .

[20]  R. Gustafson,et al.  Solar Thermal Power System for Oxygen Production from Lunar Regolith , 2008 .

[21]  Donald Rapp,et al.  Human Missions to Mars , 2007 .

[22]  B. Laub,et al.  Thermal protection system technology and facility needs for demanding future planetary missions , 2004 .

[23]  William Willcockson,et al.  Mars Global Surveyor: Aerobraking Mission Overview , 1999 .

[24]  D. M. Cooper,et al.  Technologies for aerobraking , 1990 .