Storage systems for transportation, land handling and naval applications

A confluence of industry, social, environmental and economical drivers is creating new interest in electric energy storage systems. The limitation in the energy resources availability, the continuing increasing of the fossil fuels cost and the more attention to the earth ecosystem, is making storage systems a suitable solution in many applications ranging from grid application toward the industrial and transportation ones. In this paper a review of actual electrical storage technologies suitable for transportation and naval applications is provided with particular attention to the functionalities that is possible to introduce according to the selected technology. Moreover, the applications of storage systems in land and naval handling will be analyzed in details underlining the advantages deriving by the introduction of opportunely chosen storage units.

[1]  Shigeta Hara,et al.  Study of charge acceptance for the lead-acid battery through in situ EC-AFM observation — influence of the open-circuit standing time on the negative electrode , 2001 .

[2]  Keith Robert Pullen,et al.  Kinetic energy storage for vehicles , 2006 .

[3]  Sandia Report,et al.  Energy Storage for the Electricity Grid: Benefits and Market Potential Assessment Guide A Study for the DOE Energy Storage Systems Program , 2010 .

[4]  Luigi Piegari,et al.  State of charge monitoring for road vehicle batteries , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[5]  S. Barsali,et al.  Dynamical Models of Lead-Acid Batteries: Implementation Issues , 2002, IEEE Power Engineering Review.

[6]  M. Andrus,et al.  Investigating the Impact of Pulsed Power Charging Demands on Shipboard Power Quality , 2007, 2007 IEEE Electric Ship Technologies Symposium.

[7]  Enrico Tironi,et al.  Management of different energy storage devices using a losses minimization algorithm , 2011, 2011 International Conference on Clean Electrical Power (ICCEP).

[8]  C. Wang,et al.  Application of flywheel system in series hybrid transit bus , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[9]  A. Veltman,et al.  Modeling battery efficiency with parallel branches , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[10]  S. Grillo,et al.  A control strategy for optimizing the power flows supplied by two different storage units , 2011, 2011 IEEE Trondheim PowerTech.

[11]  Rachid Outbib,et al.  Parameter identification of the lead-acid battery model , 2008, 2008 33rd IEEE Photovoltaic Specialists Conference.

[12]  M. Ceraolo,et al.  New dynamical models of lead-acid batteries , 2000 .

[13]  Marc Thele,et al.  Modeling of the charge acceptance of lead–acid batteries , 2007 .

[14]  E. Tironi,et al.  Stability enhancement in DC distribution systems with constant power controlled converters , 2012, 2012 IEEE 15th International Conference on Harmonics and Quality of Power.

[15]  D. Linden.  Handbook Of Batteries , 2001 .

[16]  Bruno Sareni,et al.  Sizing and Energy Management of a Hybrid Locomotive Based on Flywheel and Accumulators , 2009, IEEE Transactions on Vehicular Technology.

[17]  S. Santoso,et al.  Impact of pulse loads on electric ship power system: With and without flywheel energy storage systems , 2009, 2009 IEEE Electric Ship Technologies Symposium.

[18]  Jen-Yuan James Chang,et al.  Research on simulation of ship electric propulsion system with flywheel energy storage system , 2011 .