Thermoelectric Power Generator Design for Maximum Power: It’s All About ZT

There is a significant amount of literature that discusses thermoelectric power generator (TEG) design, but much of it overly simplifies the design space and therefore the results have limited use in designing real-life systems. This paper develops a more comprehensive model of the thermal and electrical interactions of a TEG in a system with known hot-side and cold-side thermal resistances and corresponding constant system temperature differential. Two design scenarios are investigated for common TEG system applications. In one method, the power from a TEG is maximized for a given electrical load, simulating a case where the TEG is electrically in series with a known load such as a fan. In the second design scenario, the power from a TEG is maximized for a given electrical load resistance ratio, n (the ratio between the external load resistance and the internal TEG resistance), simulating an application where the TEG is electrically in series with a load-matching converter. An interesting conclusion from this work is that, in the first design scenario, the electrical load resistance ratio, n, that maximizes TEG power occurs at $$ \sqrt {1 + ZT} $$ (where ZT is the thermoelectric figure of merit) instead of 1 as reported previously in literature. Equally interesting is that, if you define an analogous thermal resistance ratio, m′ (representing the ratio between the TEG thermal resistance at open-circuit conditions and the system thermal resistance), the maximum power in both design scenarios occurs at $$ \sqrt {1 + ZT} $$ instead of the commonly cited value of 1. Furthermore, results are presented for real-life designs that incorporate electrical and thermal losses common to realistic TEG systems such as electrical contact resistance and thermal bypass around the TEG due to sealing.