Practical aspects on the use of on-site Double Loop Electrochemical Potentiodynamic Reactivation Technique (DL-EPR) for Duplex Stainless Steel

[1]  Kioshy Santos de Assis,et al.  Assessment of electrochemical methods used on corrosion of superduplex stainless steel , 2012 .

[2]  B. Yan,et al.  The effect of large heat input on the microstructure and corrosion behaviour of simulated heat affected zone in 2205 duplex stainless steel , 2011 .

[3]  H. Middleton,et al.  Investigation of pitting resistance of titanium based on a modified point defect model , 2011 .

[4]  A. Davoodi,et al.  Correlation between critical pitting temperature and degree of sensitisation on alloy 2205 duplex stainless steel , 2011 .

[5]  Jingxuan Xu,et al.  Evaluation of intergranular corrosion susceptibility of UNS S31803 duplex stainless steel with an optimized double loop electrochemical potentiokinetic reactivation method , 2010 .

[6]  Jin Li,et al.  Effect of annealing treatment on microstructure evolution and the associated corrosion behavior of a super-duplex stainless steel , 2010 .

[7]  Wei Zhang,et al.  Application of the modified electrochemical potentiodynamic reactivation method to detect susceptibility to intergranular corrosion of a newly developed lean duplex stainless steel LDX2101 , 2010 .

[8]  E. M. Westin.  Microstructure and properties of welds in the lean duplex stainless steel LDX 2101 , 2010 .

[9]  Wei Zhang,et al.  Investigation of selective corrosion resistance of aged lean duplex stainless steel 2101 by non-destructive electrochemical techniques , 2009 .

[10]  Yiming Jiang,et al.  Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S32750 , 2009 .

[11]  J. Pardal,et al.  Influence of microstructure on the corrosion resistance of the duplex stainless steel UNS S31803 , 2008 .

[12]  J. Pardal,et al.  Characterization of microstructure, chemical composition, corrosion resistance and toughness of a multipass weld joint of superduplex stainless steel UNS S32750 , 2007 .

[13]  V. Číhal,et al.  Trends in the Electrochemical Polarization Potentiodynamic Reactivation Method – EPR , 2007 .

[14]  G. Totten.  Stainless Steel Heat Treatment , 2006 .

[15]  S. Gialanella,et al.  Effect of “475 °C embrittlement” on duplex stainless steels localized corrosion resistance , 2005 .

[16]  H. Sidhom,et al.  Double loop electrochemical potentiokinetic reactivation test optimization in checking of duplex stainless steel intergranular corrosion susceptibility , 2004 .

[17]  F. Rosalbino,et al.  Microstructural evolution and localized corrosion resistance of an aged superduplex stainless steel , 2004 .

[18]  C. Sellars,et al.  Recrystallisation after hot deformation of two phase stainless steels , 2003 .

[19]  L. Orkney,et al.  A Novel Approach to Characterizing the Corrosion Resistance of Super Duplex Stainless Steel Welds , 2002 .

[20]  V. Číhal,et al.  On the development of the electrochemical potentiokinetic method , 2001 .

[21]  A. Pelayo,et al.  Application of double loop electrochemical potentiodynamic reactivation test to austenitic and duplex stainless steels , 1997 .

[22]  C. Liu,et al.  Technique for Detecting Sensitization in Austenitic Stainless Steel , 1992 .