Formulation and processing of novel conductive solution inks in continuous inkjet printing of 3-D electric circuits

One of the greatest challenges for the inkjet printing electrical circuits is formulation and processing of conductive inks. In the present investigation, two different formulations of particle-free conductive solutions are introduced that are low in cost, easy to deposit, and possess good electrical properties. A novel aqueous solution consisting of silver nitrate and additives is initially described. This solution demonstrates excellent adherence to glass and polymers and has an electrical resistivity only 2.9 times that of bulk silver after curing. A metallo-organic decomposition (MOD) ink is subsequently introduced. This ink produces a close-packed silver crystal microstructure after low-temperature thermolysis and subsequent high-temperature annealing. The electrical conductance of the final consolidated trace produced with the MOD ink is very close to bulk silver. In addition, the traces produced with the MOD material exhibit excellent wear and fracture resistance. When utilized in a specialized continuous inkjet (CIJ) printing technology system, both particle-free solution inks are able to produce conductive traces in three dimensions. The importance of three-dimensional (3-D) printing of conductive traces is finally discussed in relation to the broad range of applications in the freeform fabrication industry.

[1]  R. G. Finch.  Thick film materials , 1969 .

[2]  Martin W. Jawitz.  Printed Circuit Board Materials Handbook , 1997 .

[3]  H. Le,et al.  Progress and Trends in Ink-jet Printing Technology , 1998, Journal of Imaging Science and Technology.

[4]  D. Ginley,et al.  Direct-Write Printing of Silver Metallizations on Silicon Solar Cells , 2002 .

[5]  M. L. Hair,et al.  Design criteria and future directions in ink-jet ink technology , 1989 .

[6]  D. Ginley,et al.  Metallizations by Direct-Write Inkjet Printing , 2001 .

[7]  M. Ieong,et al.  Silicon Device Scaling to the Sub-10-nm Regime , 2004, Science.

[8]  K. Teng,et al.  Application of ink jet technology on photovoltaic metallization , 1988, IEEE Electron Device Letters.

[9]  Sawyer B. Fuller,et al.  Ink-jet printed nanoparticle microelectromechanical systems , 2002 .

[10]  Jie Zhang,et al.  Fine-line conductor manufacturing using drop-on demand PZT printing technology , 2002 .

[11]  P. Buffat,et al.  Size effect on the melting temperature of gold particles , 1976 .

[12]  K. F. Teng,et al.  Metallization of solar cells with ink jet printing and silver metallo-organic inks , 1988 .

[13]  Vivek Subramanian,et al.  High-quality inkjet-printed multilevel interconnects and inductive components on plastic for ultra-low-cost RFID applications , 2003 .

[14]  B Derby,et al.  Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication. , 2003, Biomaterials.

[15]  Vivek Subramanian,et al.  Plastic-Compatible Low Resistance Printable Gold Nanoparticle Conductors for Flexible Electronics , 2003 .

[16]  B. Derby,et al.  Manufacture of biomaterials by a novel printing process , 2002, Journal of materials science. Materials in medicine.