Role of oxygen-containing groups on MWCNTs in enhanced separation and permeability performance for PVDF hybrid ultrafiltration membranes

article i nfo To investigate the effect of the oxygen-containing groups of inorganic modifiers on polyvinylidene fluoride (PVDF) membrane performance, the PVDF/multi-walled carbon nanotube (MWCNT) hybrid ultrafiltration membranes were prepared via phase inversion by dispersing pristine and different dosage oxidized MWCNTs ranging from 0.2 wt.% to 2 wt.% in PVDF casting solutions. An increment in the porosity, pore size and surface roughness of the membranes was observed by the addition of pristine and oxidized MWCNTs. The rejection increased 22.2% in the content of 0.5 wt.% oxidized MWCNTs. The contact angle of membranes decreased from 75.8° (pure PVDF) to 54.7° (PVDF/1 wt.% oxidized MWCNTs), and 11 times increase in water flux was also indicated with the incorporation of 1 wt.% oxidized MWCNTs, which was considered as the optimum dosage. More importantly, the architecture and performance of PVDF/oxidized MWCNTs hybrid membranes outperformed PVDF/pristine MWCNTs hybrid membranes remarkably in the same content (1 wt.%), which can be ascribed to the presence of hydrophilic oxygen-containing groups. This work demonstrated that the oxygen-containing groups of inorganic fillers played a critical role in determining the structures, morphologies and performances of ultrafiltration membranes.

[1]  Takeshi Matsuura,et al.  The Art of Surface Modification of Synthetic Polymeric Membranes , 2010 .

[2]  S. Nunes,et al.  Organic–inorganic membranes prepared from polyether diamine and epoxy silane , 1999 .

[3]  A. Bottino,et al.  Preparation and properties of novel organic–inorganic porous membranes , 2001 .

[4]  Juan Wang,et al.  Effect of SiO2 nanoparticle addition on the characteristics of a new organic–inorganic hybrid membrane , 2009 .

[5]  Zhonghua Zhu,et al.  A comparison study of catalytic oxidation and acid oxidation to prepare carbon nanotubes for filling with Ru nanoparticles , 2011 .

[6]  P. Schaetzel,et al.  Formation and morphology studies of different polysulfones-based membranes made by wet phase inversion process , 2006 .

[7]  Feng Zheng,et al.  The performance of the PVDF-Fe3O4 ultrafiltration membrane and the effect of a parallel magnetic field used during the membrane formation , 2012 .

[8]  R. Kabiri,et al.  New nanocomposites containing metal nanoparticles, carbon nanotube and polymer , 2008 .

[9]  Z. Qiang,et al.  Effect of TiO2 nanowire addition on PVDF ultrafiltration membrane performance , 2011 .

[10]  W. Goddard,et al.  Thermal conductivity of carbon nanotubes , 2000 .

[11]  M. Jahanshahi,et al.  Novel functionalized carbon nanotubes for improving the surface properties and performance of polyethersulfone (PES) membrane , 2012 .

[12]  J. Meng,et al.  Effects of single-walled carbon nanotubes on the functions of plasma proteins and potentials in vascular prostheses. , 2005, Nanomedicine : nanotechnology, biology, and medicine.

[13]  Xia Huang,et al.  A novel ZnO nanoparticle blended polyvinylidene fluoride membrane for anti-irreversible fouling , 2012 .

[14]  P. Ajayan.  Nanotubes from Carbon. , 1999, Chemical reviews.

[15]  Heechul Choi,et al.  Carbon nanotube blended polyethersulfone membranes for fouling control in water treatment. , 2011, Water research.

[16]  Lu Yan,et al.  EFFECT OF NANO SIZED AL2O3-PARTICLE ADDITION ON PVDF ULTRAFILTRATION MEMBRANE PERFORMANCE , 2006 .

[17]  A. Bottino,et al.  The formation of microporous polyvinylidene difluoride membranes by phase separation , 1991 .

[18]  Gustavo Capannelli,et al.  Preparation and characterization of novel porous PVDF-ZrO2 composite membranes , 2002 .

[19]  S. Ji,et al.  A new method to prepare organic–inorganic hybrid membranes , 2008 .

[20]  Jun Ma,et al.  Preparation and characterization of PVDF/TiO2 hybrid membranes with different dosage of nano-TiO2 , 2012 .

[21]  Cong-jie Gao,et al.  Preparation and properties of functionalized carbon nanotube/PSF blend ultrafiltration membranes , 2009 .

[22]  Peiyi Wu,et al.  Novel ultrafiltration membranes prepared from a multi-walled carbon nanotubes/polymer composite , 2010 .

[23]  Kang Li,et al.  Preparation of porous PVDF hollow fibre membrane via a phase inversion method using lithium perchlorate (LiClO4) as an additive , 2005 .

[24]  C. Xiao,et al.  Effect of micro-sized SiO2-particle on the performance of PVDF blend membranes via TIPS , 2010 .

[25]  C. Cornelius,et al.  Hybrid organic-inorganic membranes , 2001 .

[26]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[27]  You-Yi Xu,et al.  Preparation and characterization of PES/TiO2 composite membranes , 2008 .

[28]  Fu Liu,et al.  Preparation and characterization of poly(vinylidene fluoride) (PVDF) based ultrafiltration membranes using nano γ-Al2O3 , 2011 .

[29]  M. Botes,et al.  The potential of nanofibers and nanobiocides in water purification , 2010, Critical reviews in microbiology.

[30]  Matthias Wessling,et al.  Influence of membrane properties on fouling in submerged membrane bioreactors , 2010 .

[31]  D. Howard Fairbrother,et al.  Surface and structural characterization of multi-walled carbon nanotubes following different oxidative treatments , 2011 .

[32]  Zhen-liang Xu,et al.  Microporous polyethersulfone membranes prepared under the combined precipitation conditions with non-solvent additives , 2008 .

[33]  Liping Zhang,et al.  Preparation and Characterization of Composite Membranes of Polysulfone and Microcrystalline Cellulose , 2009 .

[34]  Y. Lee,et al.  Surface modification of polypropylene membranes by γ-ray induced graft copolymerization and their solute permeation characteristics , 2001 .

[35]  A. Boschetti-de-Fierro,et al.  Multi-walled carbon nanotubes (MWCNTs) mixed polyacrylonitrile (PAN) ultrafiltration membranes , 2012 .

[36]  Yatao Zhang,et al.  Preparation and Characterization of Novel Polyethersulfone Hybrid Ultrafiltration Membranes Bending with Modified Halloysite Nanotubes Loaded with Silver Nanoparticles , 2012 .

[37]  Brian F. Towler,et al.  Polymer-inorganic nanocomposite membranes for gas separation , 2007 .

[38]  N. Coville,et al.  Effect of acid treatment on the surface of multiwalled carbon nanotubes prepared from Fe–Co supported on CaCO3: Correlation with Fischer–Tropsch catalyst activity , 2011 .

[39]  Woo Nyon Kim,et al.  Fabrication and characterization of multi-walled carbon nanotubes/polymer blend membranes , 2006 .

[40]  Feifei Zhang,et al.  Novel GO-blended PVDF ultrafiltration membranes , 2012 .

[41]  Cheng-Liang Chang,et al.  Effect of salt additive on the formation of microporous poly(vinylidene fluoride) membranes by phase inversion from LiClO4/Water/DMF/PVDF system , 2003 .

[42]  Jun Hu,et al.  Adsorption of Ni(II) on oxidized multi-walled carbon nanotubes: effect of contact time, pH, foreign ions and PAA. , 2009, Journal of hazardous materials.

[43]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[44]  Jun Ma,et al.  Enhanced separation performance of PVDF/PVP-g-MMT nanocomposite ultrafiltration membrane based on the NVP-grafted polymerization modification of montmorillonite (MMT). , 2012, Langmuir : the ACS journal of surfaces and colloids.

[45]  Tsuneya Ando,et al.  Physics of Carbon Nanotubes , 2003 .

[46]  Peng Wang,et al.  Preparation and characterizations of a new PS/TiO2 hybrid membranes by sol–gel process , 2006 .

[47]  Heechul Choi,et al.  Protein fouling behavior of carbon nanotube/polyethersulfone composite membranes during water filtration. , 2011, Water research.

[48]  Lin Li,et al.  Fabrication of superhydrophobic hybrids from multiwalled carbon nanotubes and poly(vinylidene fluoride) , 2011 .