On the Mechanical Behaviour of Biomimetic Cornstalk-Inspired Lightweight Structures

This paper presents an investigation on the stiffness and energy absorption capabilities of three proposed biomimetic structures based on the internal architecture of a cornstalk. 3D printing was used to manufacture specimens using a tough and impact-resistant thermoplastic material, acrylonitrile butadiene styrene (ABS). The structural stiffness, maximum stress, densification strain, and energy absorption were extracted from the compression tests performed at a strain rate of 10−3 s−1. A numerical model was developed to analyse the behaviour of the biomimetic structures under compression loading. Further, a damage examination was conducted through optical microscopy and profilometry. The results showed that the cornstalk-inspired biomimetic structure exhibited a superior specific energy absorption (SEA) capability that was three times higher than that of the other core designs as reported in the literature.

[1]  F. Fraternali,et al.  Experimental characterization and mechanical modeling of additively manufactured TPU components of innovative seismic isolators , 2022, Acta Mechanica.

[2]  Falguni Gorana,et al.  Parameter optimization for dimensional accuracy of fused deposition modelling parts , 2022, Materials Today: Proceedings.

[3]  D. Mohotti,et al.  Impact Resistance and Yarn Pull-Out Behaviour of Polymer Spray-Coated UHMWPE Fabrics , 2022, Materials Today Communications.

[4]  P. Hazell.  Armour , 2022 .

[5]  P. Hazell,et al.  Lessons from nature: 3D printed bio-inspired porous structures for impact energy absorption – a review , 2022, Additive Manufacturing.

[6]  P. Hazell,et al.  From biology to biomimicry: Using nature to build better structures – A review , 2022, Construction and Building Materials.

[7]  B. Prusty,et al.  Low-velocity impact behaviours of AFP manufactured fibre metal laminate structures , 2021, Materials Today: Proceedings.

[8]  D. Bhate,et al.  Properties and applications of additively manufactured metallic cellular materials: a review , 2021, Progress in Materials Science.

[9]  J. Müssig,et al.  Biomimetic approaches towards lightweight composite structures for car interior parts , 2021, Materials & Design.

[10]  P. Hazell,et al.  Dynamic Behaviour of Bio-inspired Heterocyclic Aramid Fibre-reinforced Laminates Subjected to Low-velocity Drop-weight Impact , 2021, Composites Part A: Applied Science and Manufacturing.

[11]  Qing Li,et al.  On the structural parameters of honeycomb-core sandwich panels against low-velocity impact , 2021, Composites Part B: Engineering.

[12]  P. Hazell,et al.  Biomimetic armour design strategies for additive manufacturing: A review , 2021, Materials & Design.

[13]  Tuya Wulan,et al.  A discrete element method model of corn stalk and its mechanical characteristic parameters , 2020 .

[14]  Meng Zou,et al.  Experimental study on the crashworthiness of bio-inspired aluminum foam-filled tubes under axial compression loading , 2020 .

[15]  Burton L. Johnson,et al.  Evaluation of simulated hail damage on seed yield and agronomic traits in canola (Brassica napus L.) , 2020, Canadian Journal of Plant Science.

[16]  He Siyuan,et al.  Density gradient tailoring of aluminum foam-filled tube , 2019, Composite Structures.

[17]  F. Ebrahimi,et al.  Stability analysis of embedded graphene platelets reinforced composite plates in thermal environment , 2019, The European Physical Journal Plus.

[18]  C. Broeckhoven,et al.  Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing , 2019, Additive Manufacturing.

[19]  F. Ebrahimi,et al.  An investigation of the vibration of multi-layer composite beams reinforced by graphene platelets resting on two parameter viscoelastic foundation , 2019, SN Applied Sciences.

[20]  Qing Li,et al.  High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations , 2018, International Journal of Impact Engineering.

[21]  Qing Li,et al.  Low-velocity impact behaviour of sandwich panels with homogeneous and stepwise graded foam cores , 2018, Materials & Design.

[22]  N. Hopkinson,et al.  Experimental and analytical investigation of mechanical behavior of laser-sintered diamond-lattice structures , 2018, Additive Manufacturing.

[23]  C. Broeckhoven,et al.  Analyzing nature's protective design: The glyptodont body armor. , 2018, Journal of the mechanical behavior of biomedical materials.

[24]  Z. Guan,et al.  The energy-absorbing behaviour of composite tube-reinforced foams , 2018 .

[25]  Dragan Damjanovic,et al.  Flexoelectricity in Bones , 2018, Advanced materials.

[26]  M. Ramage,et al.  The strength of plants: theory and experimental methods to measure the mechanical properties of stems. , 2017, Journal of experimental botany.

[27]  Dirk Mohr,et al.  Large deformation response of additively-manufactured FCC metamaterials: From octet truss lattices towards continuous shell mesostructures , 2017 .

[28]  Kaifei Zhang,et al.  Research on mechanical properties of corn stalk , 2017 .

[29]  Hualin Fan,et al.  Hybrid design and energy absorption of luffa-sponge-like hierarchical cellular structures , 2016 .

[30]  A Bührig-Polaczek,et al.  Biomimetic cellular metals—using hierarchical structuring for energy absorption , 2016, Bioinspiration & biomimetics.

[31]  Douglas D. Cook,et al.  Corn Stalk Lodging: A Forensic Engineering Approach Provides Insights into Failure Patterns and Mechanisms , 2015 .

[32]  Paul Hazell,et al.  Armour: Materials, Theory, and Design , 2015 .

[33]  M. Horstemeyer,et al.  Structure-property responses of bio-inspired synthetic foams at low and high strain rates , 2015 .

[34]  Hongzhang Chen,et al.  Lignocellulose Biorefinery Engineering: Principles and Applications , 2015 .

[35]  G. Schleyer,et al.  Characterisation of aluminium matrix syntactic foams under drop weight impact , 2014 .

[36]  Z. Guan,et al.  The mechanical properties of natural fibre based honeycomb core materials , 2014 .

[37]  H. Nakajima,et al.  Formation mechanism of a plateau stress region during dynamic compression of porous iron: Interaction between oriented cylindrical pores and deformation twins , 2014 .

[38]  S. Balawi,et al.  The energy-absorbing characteristics of polymer foams reinforced with bamboo tubes , 2014 .

[39]  Changying Li,et al.  Design of Bionic Saw Blade for Corn Stalk Cutting , 2013 .

[40]  Mohd Ruzaimi Mat Rejab,et al.  The Mechanical Behaviour of Corrugated-Core Sandwich Panels , 2013 .

[41]  M. Smith,et al.  Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique , 2013 .

[42]  T. Speck,et al.  Viscoelasticity and compaction behaviour of the foam-like pomelo (Citrus maxima) peel , 2013, Journal of Materials Science.

[43]  Vadim V. Silberschmidt,et al.  Micro-scale modelling of bovine cortical bone fracture: Analysis of crack propagation and microstructure using X-FEM , 2012 .

[44]  M. Horstemeyer,et al.  A study on the structure and mechanical behavior of the Dasypus novemcinctus shell , 2011 .

[45]  Wesley J. Cantwell,et al.  The quasi-static and blast loading response of lattice structures , 2008 .

[46]  Liang Li,et al.  Biomechanical evaluation and grey relational analysis of lodging resistance of stalk crops , 2007 .

[47]  M. Saadatfar,et al.  Novel design of closed-cell foam structures for property enhancement , 2020 .

[48]  S. Boria.  Lightweight design and crash analysis of composites , 2016 .

[49]  S. Heimbs.  Energy Absorption in Aircraft Structures , 2013 .

[50]  J. Papadopoulos,et al.  Compression and impact testing of two-layer composite pyramidal-core sandwich panels , 2012 .

[51]  Pan Jinming.  Study on the Moisture Content and Tensile Properties of Corn Straw , 2012 .

[52]  R. Bueckert.  Simulated hail damage and yield reduction in lentil , 2011, Canadian Journal of Plant Science.