MACHINING CONTACT AND NON-CONTACT INSPECTION TECHNOLOGIES IN INDUSTRIAL APPLICATION

Even though coordinate measuring machines (CMM) still achieve the most accurate measurement results, non-contact (optical) measuring systems are applied more and more in industry. The reasons of using optical scanners are in the higher speed of acquisition, higher density of data-points and better surface description, the ability to scan complex and non-rigid surfaces etc in comparison to contcact devices. This paper gives a review of state-of-the-art measuring contact and non-contact inspection technologies in industrial applications. Listed are the devices, principles and systems that are used at the data-acquisition (triangulation, time-of-flight and interferometry). The description of contact measuring machines (portable CMM and stationary CMM) and devices for non-contact scanning (laser scanner, structured light scanner and CT scanner) is given, and their advatages and disadvantages are mentioned with corresponding literature review.

[1]  G. Roth,et al.  View planning for automated three-dimensional object reconstruction and inspection , 2003, CSUR.

[2]  Jean-Pierre Kruth,et al.  Automated dimensional inspection planning using the combination of laser scanner and tactile probe , 2012 .

[3]  François Blais.  Review of 20 years of range sensor development , 2004, J. Electronic Imaging.

[4]  Robert Schmitt,et al.  Industrial applications of computed tomography , 2014 .

[5]  Abdulrahman Al-Ahmari,et al.  Evaluation of Handheld Scanners for Automotive Applications , 2018 .

[6]  Xiangqian Jiang,et al.  Multisensor data fusion in dimensional metrology , 2009 .

[7]  Song Zhang,et al.  Handbook of 3D Machine Vision: Optical Metrology and Imaging , 2013 .

[8]  Yann Quinsat,et al.  A novel approach for in-situ detection of machining defects , 2017 .

[9]  H. Kunzmann,et al.  Performance of CMMs , 1988 .

[10]  W. Boehler,et al.  3D SCANNING INSTRUMENTS , 2002 .

[11]  Zhan-Qiang Liu,et al.  Repetitive Measurement and Compensation to Improve Workpiece Machining Accuracy , 1999 .

[12]  G. Sansoni,et al.  Combination of a Vision System and a Coordinate Measuring Machine for the Reverse Engineering of Freeform Surfaces , 2001 .

[13]  John A. Bosch,et al.  Coordinate Measuring Machines and Systems , 1995 .

[14]  Lihui Wang,et al.  Review: Advances in 3D data acquisition and processing for industrial applications , 2010 .

[15]  Francesca Odone,et al.  An open system for 3D data acquisition from multiple sensor , 2005, Seventh International Workshop on Computer Architecture for Machine Perception (CAMP'05).

[16]  A. Kilpela,et al.  PULSED TIME-OF-FLIGHT LASER RANGE FINDER TECHNIQUES FOR FAST, HIGH PRECISION MEASUREMENT APPLICATIONS , 2004 .

[17]  Robert G. Wilhelm,et al.  Task Specific Uncertainty in Coordinate Measurement , 2001 .

[18]  Giovanna Sansoni,et al.  State-of-The-Art and Applications of 3D Imaging Sensors in Industry, Cultural Heritage, Medicine, and Criminal Investigation , 2009, Sensors.

[19]  Samir Mekid,et al.  In-process dimensional inspection sensors , 2005 .

[20]  Eduardo Cuesta,et al.  Analysis of laser scanning and strategies for dimensional and geometrical control , 2010 .

[21]  Jing Xu,et al.  Rapid 3D surface profile measurement of industrial parts using two-level structured light patterns , 2011 .

[22]  Laine Mears,et al.  Quality and Inspection of Machining Operations: CMM Integration to the Machine Tool , 2009 .

[23]  Robert Schmitt,et al.  Computed tomography for dimensional metrology , 2011 .

[24]  David J. Whitehouse,et al.  Surfaces and their Measurement , 2002 .

[25]  Yunbao Huang,et al.  A dynamic sensing-and-modeling approach to three-dimensional point-and area-sensor integration , 2007 .

[26]  Magdalena Kupiec.  COORDIANATE MEASURMENT SYSTEMS CMM AND CMA – CHARACTERISTC AND METHODS OF THEIR ACCURACY EVALUATION , 2012 .

[27]  Ralph R. Martin,et al.  Reverse engineering of geometric models - an introduction , 1997, Comput. Aided Des..

[28]  Radomir Mendricky,et al.  DETERMINATION OF MEASUREMENT ACCURACY OF OPTICAL 3D SCANNERS , 2016 .

[29]  Kevin G. Harding,et al.  Handbook of Optical Dimensional Metrology , 2013 .

[30]  H. Sternberg,et al.  TERRESTRIAL LASERSCANNING SYSTEM MENSI GS100/GS200 – ACCURACY TESTS, EXPERIENCES AND PROJECTS AT THE HAMBURG UNIVERSITY OF APPLIED SCIENCES , 2004 .