A Q-band high gain and low noise variable gain amplifier using dual gate HEMTs

A Q-band high gain and low noise Variable Gain Amplifier (VGA) using dual gate AlGaAs/InGaAs pseudomorphic HEMTs has been developed. The dual gate HEMT can be fabricated using the same process as the single gate HEMT with a gate length of 0.15 /spl mu/m. The Q-band VGA consists of a 1-stage low noise amplifier MMIC using a single gate HEMT and a 2-stage VGA MMIC using dual gate HEMTs. The VGA has a gain of more than 20 dB from 41 GHz to 52 GHz. A gain control range of more than 30 dB is obtained in the same frequency range. A minimum noise figure of 1.8 dB with an associated gain of 22 dB is achieved at 43 GHz when biased for a low noise figure. This performance is comparable with the best data ever reported for LNAs at Q-band including both GaAs based HEMTs and InP based HEMTs.

[1]  D. D. Heston,et al.  A monolithic variable gain Ku-band LNA , 1989, IEEE MTT-S International Microwave Symposium Digest.

[2]  H. Minami,et al.  Photo/EB hybrid exposure process for T-shaped gate superlow-noise HEMTs , 1991 .

[3]  Y. Pao,et al.  5-60 GHz high-gain distributed amplifier utilizing InP cascode HEMTs , 1991, [1991] GaAs IC Symposium Technical Digest.

[4]  Takuo Kashiwa,et al.  A 60 GHz-band ultra low noise planar-doped HEMT , 1993, 1993 IEEE MTT-S International Microwave Symposium Digest.

[5]  R. Lai,et al.  A high-performance monolithic Q-band InP-based HEMT low-noise amplifier , 1993, IEEE Microwave and Guided Wave Letters.

[6]  Y. Takimoto,et al.  Research activities on millimeter wave indoor communication systems in Japan , 1993, 1993 IEEE MTT-S International Microwave Symposium Digest.

[7]  Noriyuki Tanino,et al.  An Ultra Low Noise 50-GHz-Band Amplifier MMIC Using an AIGaAs/InGaAs Pseudomorphic HEMT , 1995 .

[8]  Minh Le,et al.  Q- and V-band MMIC chip set using 0.1 /spl mu/m millimeter-wave low noise InP HEMTs , 1995, Proceedings of 1995 IEEE MTT-S International Microwave Symposium.