Evolution of constrained layer damping using a cellular automaton algorithm

Constrained layer damping (CLD) is a highly effective passive vibration control strategy if optimized adequately. Factors controlling CLD performance are well documented for the flexural modes of beams but not for more complicated mode shapes or structures. The current paper introduces an approach that is suitable for locating CLD on any type of structure. It follows the cellular automaton (CA) principle and relies on the use of finite element models to describe the vibration properties of the structure. The ability of the algorithm to reach the best solution is demonstrated by applying it to the bending and torsion modes of a plate. Configurations that give the most weight-efficient coverage for each type of mode are first obtained by adapting the existing ‘optimum length’ principle used for treated beams. Next, a CA algorithm is developed, which grows CLD patches one at a time on the surface of the plate according to a simple set of rules. The effectiveness of the algorithm is then assessed by comparing the generated configurations with the known optimum ones.

[1]  D. J. Mead,et al.  The forced vibration of a three-layer, damped sandwich beam with arbitrary boundary conditions , 1969 .

[2]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[3]  Melanie Mitchell,et al.  An introduction to genetic algorithms , 1996 .

[4]  Ronald F. Gibson,et al.  Optimal constrained viscoelastic tape lengths for maximizing dampingin laminated composites , 1991 .

[5]  Stephen Wolfram,et al.  A New Kind of Science , 2003, Artificial Life.

[6]  D. K. Rao,et al.  Frequency and Loss Factors of Sandwich Beams under Various Boundary Conditions , 1978 .

[7]  M. Leibowitz,et al.  Optimal sandwich beam design for maximum viscoelastic damping , 1987 .

[8]  P. Grootenhuis.  The control of vibrations with viscoelastic materials , 1970 .

[9]  Eric R. Marsh,et al.  Damping of Flexural Waves With Imbedded Viscoelastic Materials , 1998 .

[10]  Parimal Pal Chaudhuri,et al.  Additive Cellular Automata Theory and Applications Volume I , 1997 .

[11]  G. Liua,et al.  A Comparative Study on Optimization of Constrained Layer Damping for Vibration Control of Beams , 2022 .

[12]  John E. Renaud,et al.  Hybrid Cellular Automata: a biologically-inspired structural optimization technique , 2004 .

[13]  Jem A. Rongong,et al.  Suppression of ring vibration modes of high nodal diameter using constrained layer damping methods , 1996 .

[14]  G. Pau,et al.  A Comparative Study on Optimization of Constrained Layer Damping for Vibration Control of Beams , 2003 .

[15]  B. C. Nakra,et al.  Vibration and Damping Analysis of Rectangular Plate With Partially Covered Constrained Viscoelastic Layer , 1987 .

[16]  Santanu Chattopadhyay,et al.  Additive cellular automata : theory and applications , 1997 .

[17]  Hui Zheng,et al.  Optimization of partial constrained layer damping treatment for vibrational energy minimization of vibrating beams , 2004 .

[18]  S. Timoshenko,et al.  Mechanics of Materials, 3rd Ed. , 1991 .

[19]  Rohan V. Pai,et al.  Design of Constrained Layer Damping Topologies , 2003 .

[20]  Kimberly J. Balkema.  Design and Analysis of Constrained Layer Damping Treatments for Bending and Torsion , 1994 .

[21]  Yi-Cheng Chen,et al.  An optimal placement of CLD treatment for vibration suppression of plates , 2002 .

[22]  Peter J. Torvik,et al.  Modifications to the Method of Modal Strain Energy for Improved Estimates of Loss Factors for Damped Structures , 2007 .

[23]  Robin Wardle,et al.  Structural design for dynamic loading using a biomimetic approach , 1997, Smart Structures.

[24]  E. Kerwin.  Damping of Flexural Waves by a Constrained Viscoelastic Layer , 1959 .

[25]  R. Plunkett,et al.  Length Optimization for Constrained Viscoelastic Layer Damping , 1970 .

[26]  Colin Fyfe,et al.  Ant Colony Optimisation , 2008 .

[27]  John E. Renaud,et al.  Bone Structure Adaptation as a Cellular Automaton Optimization Process , 2004 .

[28]  Roger Lundén,et al.  Optimum distribution of additive damping for vibrating beams , 1979 .

[29]  David A. Kienholz,et al.  Finite element prediction of damping in structures with constrained viscoelastic layers , 1981 .

[30]  Jonathan Timmis,et al.  Artificial Immune Systems: A New Computational Intelligence Approach , 2003 .

[31]  Stephen A. Billings,et al.  The Identification of Cellular Automata , 2006, J. Cell. Autom..