Stability of zoom and fixed lenses used with digital SLR cameras

Consumer grade digital cameras are widely used for close range photogrammetric applications because of the convenience of digital images and the low cost of capture and reproduction. Since the introduction of digital cameras in the 1980s, there has been a strong divide between relatively inexpensive, low resolution, compact digital cameras, and relatively expensive, high resolution, professional digital cameras. In recent years, the improved affordability of SLR (Single Lens Reflex) style digital cameras has increased the use of this class of camera, to some degree displacing professional cameras. Digital cameras are quite often bundled with a consumer grade zoom lens that is designed for the quality of the image, rather than the geometric stability of the calibration. When these cameras are used for photogrammetric applications, it is common practice that a high quality, fixed focal length lens is purchased and used in preference to the zoom lens. Calibration tests were conducted on a range of different digital cameras, all within the SLR class, to ascertain the differences between zoom and fixed lenses when used with these cameras. Analyses are presented that indicate the differences between the two lens types in terms of accuracy, precision and stability and suggest that although acceptable results can be obtained using zoom lenses, a fixed lens provides superior results.

[1]  Mark R. Shortis,et al.  Erratum: “Photogrammetry: An Available Surface Characterization Tool for Solar Concentrators, Part II: Assessment of Surfaces” (ASME Journal of Solar Energy Engineering, 1997, 119, pp. 286–291) , 1998 .

[2]  Alpheus W. Burner Zoom lens calibration for wind tunnel measurements , 1995, Other Conferences.

[3]  Walter L. Snow,et al.  COMPARATIVE GEOMETRIC TESTS OF INDUSTRIAL AND SCIENTIFIC CCD CAMERAS USING PLUMB LINE AND TEST RANGE CALIBRATIONS , 1995 .

[4]  G. Johnston Videographic and photogrammetric characterisations of reflective trough solar concentrators , 1999 .

[5]  Brooks A. Childers,et al.  The calibration of video cameras for quantitative measurements , 1993 .

[6]  Horst A. Beyer,et al.  Calibration modeling and stability testing for the Kodak DC200 series digital still camera , 2000, IS&T/SPIE Electronic Imaging.

[7]  Stuart Robson,et al.  Practical Influences of Geometric and Radiometric Image Quality Provided By Different Digital Camera Systems , 1998 .

[8]  Ayman Habib,et al.  Standardized Measures for the Stability Analysis of Low-Cost Digital Cameras and Potential Applications , 2005 .

[9]  Mark R. Shortis,et al.  Photogrammetry: An Available Surface Characterization Tool for Solar Concentrators, Part I: Measurements of Surfaces , 1996 .

[10]  J. Fryer,et al.  Metric capabilities of low‐cost digital cameras for close range surface measurement , 2005 .

[11]  Stuart Robson,et al.  Dimensional & Accuracy Control Automation: An Integration of Advanced Image Interpretation, Analysis and Visualization , 2004 .

[12]  Stuart Robson,et al.  Comparative camera calibrations of some 'off the shelf' digital cameras suited to archaeological purposes. , 1999 .

[13]  C. Fraser Some Thoughts on the Emergence of Digital Close Range Photogrammetry , 1998 .

[14]  Euan S. Harvey,et al.  Calibration stability of an underwater stereo-video system : Implications for measurement accuracy and precision , 1998 .

[15]  Mark R. Shortis,et al.  Multisensor system self-calibration , 1995, Other Conferences.

[16]  Stuart Robson,et al.  PRINCIPAL POINT BEHAVIOUR AND CALIBRATION PARAMETER MODELS FOR KODAK DCS CAMERAS , 1998 .

[17]  A. G. Wiley,et al.  Geometric calibration of zoom lenses for computer vision metrology , 1995 .

[18]  X. Wang,et al.  The Principal Point and CCD Cameras , 1998 .

[19]  Horst A. Beyer,et al.  Calibration modelling and stability testing for the Kodak DC200 series digital still camera , 2001 .

[20]  Jean-Marc Lavest,et al.  Some Aspects of Zoom Lens Camera Calibration , 1996, IEEE Trans. Pattern Anal. Mach. Intell..