Calibrating laser beam deflection systems for use in atomic force microscopes and cantilever sensors

Most atomic force microscopes and cantilever-based sensors use an optical laser beam detection system to monitor cantilever deflections. We have developed a working model that accurately describes the way in which a position sensitive photodetector interprets the deflection of a cantilever in these instruments. This model exactly predicts the numerical relationship between the measured photodetector signal and the actual cantilever deflection. In addition, the model is used to optimize the geometry of such laser deflection systems, which greatly simplifies the use of any cantilever-based instrument that uses a laser beam detection system.

[1]  Peter Williams,et al.  Quantitative surface stress measurements using a microcantilever , 2001 .

[2]  N. Amer,et al.  Erratum: Novel optical approach to atomic force microscopy [Appl. Phys. Lett. 53, 1045 (1988)] , 1988 .

[3]  T. Thundat,et al.  Calibration of optical cantilever deflection readers , 2004 .

[4]  Michel Godin,et al.  Combined in situ micromechanical cantilever-based sensing and ellipsometry , 2003 .

[5]  Ludmila Eckertova,et al.  Physics of thin films , 1977 .

[6]  Joel Villatoro,et al.  Noise in optical measurements of cantilever deflections , 1998 .

[7]  Peter Vettiger,et al.  A chemical sensor based on a micromechanical cantilever array for the identification of gases and vapors , 1998 .

[8]  G. Stoney.  The Tension of Metallic Films Deposited by Electrolysis , 1909 .

[9]  J. Hoh,et al.  Calibration of optical lever sensitivity for atomic force microscopy , 1995 .

[10]  Limits of different detection schemes used in the optical beam deflection method , 1997 .

[11]  M. Courbon,et al.  Improvement of the cantilever beam technique for stress measurement during the physical vapor deposition process , 1998 .

[12]  M. Fujihira,et al.  Calibration of surface stress measurements with atomic force microscopy , 1997 .

[13]  Panos G. Datskos,et al.  Photoinduced and thermal stress in silicon microcantilevers , 1998 .

[14]  Gerald E. Farin,et al.  The geometry toolbox - for graphics and modeling , 1998 .

[15]  Mark E. Welland,et al.  Atomic force microscopy stress sensors for studies in liquids , 1996 .

[16]  M. Welland,et al.  Measuring surface stress induced by electrode processes using a micromechanical sensor , 1996 .