Influence of birefringence dispersion on a distributed stress sensor using birefringent optical fiber

Distributed stress sensor with a white-light scanning interferometer is used to detect stress distribution by analyzing polarization mode coupling caused by forces exerted on PMFs (polarization maintaining fibers). In measurement of polarization coupling, the birefringence in sensing fiber is usually considered to be wavelength independent. Sensitivity and spatial resolution of the distributed stress sensor are constant for a given optical source spectrum. In practical measurement, however, the birefringence in PMFs is related with optical wavelength. In other words, birefringence dispersion exists in PMFs. Due to birefringence dispersion, the relationship between stress and coupling strength varies with different positions of external forces, and spatial resolution of the distributed stress sensor descends obviously with transmitted distance. In this paper, influences of external-force positions and optical source spectrum on distributed stress sensor are analyzed in consideration of birefringence dispersion and validated with experiments. A method for compensating birefringence dispersion in the sensing system is proposed in the end.

[1]  Wencai Jing,et al.  Characterization of birefringence dispersion in polarization-maintaining fibers by use of white-light interferometry. , 2007, Applied optics.

[2]  A. Kersey,et al.  Applications of fiber-optic sensors , 1989 .

[3]  Wencai Jing,et al.  Distributed measurement of birefringence dispersion in polarization-maintaining fibers. , 2006, Optics letters.

[4]  Nori Shibata,et al.  Mode coupling effects in stress-applied single polarization fibers , 1982 .

[5]  Jan Soubusta,et al.  Measurement of the influence of dispersion on white-light interferometry. , 2004, Applied optics.

[6]  Anthony Dandridge,et al.  Optical Fiber Sensor Technology , 1982 .

[7]  Petr Hlubina,et al.  Spectral-domain interferometric techniques used to measure the intermodal group dispersion in a two-mode bow–tie optical fibre , 2004 .

[8]  A. Dandridge,et al.  Distributed and multiplexed fibre-optic sensor systems , 1988 .

[9]  A. Kersey.  A Review of Recent Developments in Fiber Optic Sensor Technology , 1996 .

[10]  Kenneth T. V. Grattan,et al.  An intrinsic optical-fiber position sensor with schemes for temperature compensation and resolution enhancement , 1997 .

[11]  N. Shibata,et al.  Interference between two orthogonally polarized modes traversing a highly birefringent air-silica microstructure fiber , 2005, Journal of Lightwave Technology.

[12]  Roy McBride,et al.  Dispersion of birefringence and differential group delay in polarization-maintaining fiber. , 2002, Optics letters.

[13]  Petr Hlubina,et al.  Dispersion of the group birefringence of a calcite crystal measured by white-light spectral interferometry , 2005 .

[14]  Alan D. Kersey,et al.  Fiber optic sensors in concrete structures: a review , 1996 .

[15]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[16]  Petr Hlubina,et al.  Measurements of birefringence dispersion and intermodal dispersion in a two-mode elliptical-core optical fibre using an interferometric method , 2004 .

[17]  T H Chua,et al.  Fiber polarimetric stress sensors. , 1989, Applied optics.

[18]  M. Tsubokawa,et al.  Mode couplings due to external forces distributed along a polarization-maintaining fiber: an evaluation. , 1988, Applied optics.