Design of an Automated Handling System for Limp, Flexible Sheet Lasagna Pasta

The manipulation of flexible and limp sheet materials is a common requirement in many industrial manufacturing processes, however automation of even simple tasks involving these difficult to handle materials tends to be particularly problematic. The industrial manufacture of lasagna ready meals is one example of a process that has been almost completely automated except for the handling of the flexible lasagna pasta, which remains a highly repetitive and labour intensive manual task. In this paper a robotic end-effector is developed to enable the automatic handling of lasagna pasta sheets. The design of the end-effector is described and its performance evaluated through testing using a robot arm. The concept was further developed into a low cost fixed automation machine suitable for industrial use. The pneumatic pick and place type machine was able to pick a pasta sheet from a moving conveyor and place it into a plastic tray with a cycle time of less than 4 seconds.

[1]  Rajiv Dubey,et al.  Robotic Fabric Handling for Automating Garment Manufacturing , 1983 .

[2]  Frank W. Paul.  Acquisition, placement, and folding of fabric materials , 2004 .

[3]  P. M. Taylor.  Handling of flexible materials in automation , 1996 .

[4]  Eiichi Ono,et al.  Flexible Robotic Hand for Handling Fabric Pieces in Garment Manufacture , 1992 .

[5]  Paul M. Taylor,et al.  Pinching grippers for the secure handling of fabric panels , 1996 .

[6]  F Erzincanli,et al.  Design and operational considerations of a non-contact robotic handling system for non-rigid materials , 1998 .

[7]  Paul M. Taylor.  Presentation and gripping of flexible materials , 1995 .

[8]  P.M. Taylor,et al.  Automated fabric handling problems and techniques , 1990, 1990 IEEE International Conference on Systems Engineering.

[9]  Gareth J. Monkman,et al.  Electrostatic grippers for fabric handling , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[10]  Darwin G. Caldwell,et al.  Robotic manipulation of food products - a review , 2003, Ind. Robot.

[11]  Chris A. Czarnecki.  Automated stripping: a robotic handling cell for garment manufacture , 1995, IEEE Robotics Autom. Mag..

[12]  G. Seliger,et al.  Handling with ice – the cryo‐gripper, a new approach , 1999 .

[13]  Mozafar Saadat,et al.  Industrial applications of automatic manipulation of flexible materials , 2002 .

[14]  G. J. Monkman,et al.  PERMATACK ADHESIVES FOR ROBOT GRIPPERS , 1991 .

[15]  Kimon P. Valavanis,et al.  A robotic gripper system for limp material manipulation: modeling, analysis and performance evaluation , 1997, Proceedings of International Conference on Robotics and Automation.