Statistical Determination of Johnson-Cook Model Parameters for Porous Materials by Machine Learning and Particle Swarm Optimization Algorithm

[1]  D. Gu,et al.  Effects of processing parameters on densification behavior, microstructure evolution and mechanical properties of W–Ti alloy fabricated by laser powder bed fusion , 2022, Materials Science and Engineering: A.

[2]  A. Fałkowska,et al.  Image-based numerical modeling of the tensile deformation behavior and mechanical properties of additive manufactured Ti–6Al–4V diamond lattice structures , 2021 .

[3]  M. Hao,et al.  Quantitative evaluation on mechanical characterization of Ti6Al4V porous scaffold designed based on Weaire-Phelan structure via experimental and numerical analysis methods , 2021 .

[4]  Weihong Zhang,et al.  Fracture and failure behavior of additive manufactured Ti6Al4V lattice structures under compressive load , 2021 .

[5]  X. Xue,et al.  A predictive model for the bond strength of near-surface-mounted FRP bonded to concrete , 2021 .

[6]  R. Arróyave,et al.  Utilizing Gaussian processes to fit high dimension thermodynamic data that includes estimated variability , 2020 .

[7]  Yanfeng Liu,et al.  A novel combined multi-task learning and Gaussian process regression model for the prediction of multi-timescale and multi-component of solar radiation , 2020 .

[8]  Jian Song,et al.  3D printing of titanium-coated gradient composite lattices for lightweight mandibular prosthesis , 2020 .

[9]  Mohamad El Hariri,et al.  Multi-Task Gaussian Process Learning for Energy Forecasting in IoT-Enabled Electric Vehicle Charging Infrastructure , 2020, 2020 IEEE 6th World Forum on Internet of Things (WF-IoT).

[10]  Zhibo Ma,et al.  Sheet and network based functionally graded lattice structures manufactured by selective laser melting: Design, mechanical properties, and simulation , 2020 .

[11]  J. Jeffers,et al.  A validated finite element analysis procedure for porous structures , 2020 .

[12]  M. Kitamura,et al.  Finite element simulation of the compressive response of additively manufactured lattice structures with large diameters , 2020, Computational Materials Science.

[13]  Zhibo Ma,et al.  Mechanical and energy absorption characteristics of additively manufactured functionally graded sheet lattice structures with minimal surfaces , 2020 .

[14]  Hongmei Zhang,et al.  Effect of structural parameters on mechanical properties of Pyramidal Kagome lattice material under impact loading , 2019, International Journal of Impact Engineering.

[15]  Weidong Song,et al.  Deformation and failure modes of Ti-6Al-4V lattice-walled tubes under uniaxial compression , 2019, International Journal of Impact Engineering.

[16]  Lan Li,et al.  Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility , 2019, Journal of Materials Science & Technology.

[17]  T. Yoneyama,et al.  Application of titanium and titanium alloys to fixed dental prostheses. , 2019, Journal of prosthodontic research.

[18]  H. Liao,et al.  Mechanical and in vitro study of an isotropic Ti6Al4V lattice structure fabricated using selective laser melting , 2019, Journal of Alloys and Compounds.

[19]  Su Wang,et al.  Pore functionally graded Ti6Al4V scaffolds for bone tissue engineering application , 2019, Materials & Design.

[20]  Cuie Wen,et al.  Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications , 2018, Acta Materialia.

[21]  Peifeng Li,et al.  Characterisation and constitutive model of tensile properties of selective laser melted Ti-6Al-4V struts for microlattice structures , 2018 .

[22]  S. Bahl,et al.  Surface nanostructuring of titanium imparts multifunctional properties for orthopedic and cardiovascular applications , 2018 .

[23]  Yanfeng Liu,et al.  Classification of solar radiation zones and general models for estimating the daily global solar radiation on horizontal surfaces in China , 2017 .

[24]  Vincenzo Crupi,et al.  Static behavior of lattice structures produced via direct metal laser sintering technology , 2017 .

[25]  Amir A. Zadpoor,et al.  Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials , 2016 .

[26]  D. Pasini,et al.  High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints. , 2016, Acta biomaterialia.

[27]  J. Ding,et al.  Numerical study of the deformation and fracture behavior of porous Ti6Al4V alloy under static and dynamic loading , 2015 .

[28]  Peifeng Li,et al.  Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures , 2015 .

[29]  Brent Stucker,et al.  Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes , 2014 .

[30]  Ming Gao,et al.  Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel , 2013 .

[31]  Atef Z. Elsherbeni,et al.  Design of Single-Feed Reflectarray Antennas With Asymmetric Multiple Beams Using the Particle Swarm Optimization Method , 2013, IEEE Transactions on Antennas and Propagation.

[32]  D. Montgomery,et al.  Comparing Computer Experiments for the Gaussian Process Model Using Integrated Prediction Variance , 2013 .

[33]  Weihong Zhang,et al.  Minimizing thermal residual stresses in C/SiC functionally graded material coating of C/C composites by using particle swarm optimization algorithm , 2012 .

[34]  Yunan Prawoto,et al.  Computational approach using Johnson–Cook model on dual phase steel , 2012 .

[35]  Alper Ekrem Murat,et al.  A discrete particle swarm optimization method for feature selection in binary classification problems , 2010, Eur. J. Oper. Res..

[36]  Ryan B. Wicker,et al.  Characterization of Ti–6Al–4V open cellular foams fabricated by additive manufacturing using electron beam melting , 2010 .

[37]  Jerome Sacks,et al.  Choosing the Sample Size of a Computer Experiment: A Practical Guide , 2009, Technometrics.

[38]  Yifu Shen,et al.  Processing conditions and microstructural features of porous 316L stainless steel components by DMLS , 2008 .

[39]  Edwin V. Bonilla,et al.  Multi-task Gaussian Process Prediction , 2007, NIPS.

[40]  Narayana Prasad Padhy,et al.  Comparison of Particle Swarm Optimization and Genetic Algorithm for TCSC-based Controller Design , 2007 .

[41]  Hao Zhang,et al.  Maximum‐likelihood estimation for multivariate spatial linear coregionalization models , 2007 .

[42]  O. Weck,et al.  A COMPARISON OF PARTICLE SWARM OPTIMIZATION AND THE GENETIC ALGORITHM , 2005 .

[43]  G Kay,et al.  Failure Modeling of Titanium-6Al-4V and 2024-T3 Aluminum with the Johnson-Cook Material Model , 2002 .

[44]  Tomáš Kroupa,et al.  The Influence of Processing Parameters on the Mechanical Properties of SLM Parts , 2015, Procedia Engineering.

[45]  Junjie Li,et al.  System probabilistic stability analysis of soil slopes using Gaussian process regression with Latin hypercube sampling , 2015 .

[46]  Yancheng Zhang,et al.  On the selection of Johnson-Cook constitutive model parameters for Ti-6Al-4V using three types of numerical models of orthogonal cutting , 2015 .

[47]  Tao Yu,et al.  Reliable multi-objective optimization of high-speed WEDM process based on Gaussian process regression , 2008 .